Interested. Thank you freeme.

JasonWW wrote:

lionheart_2281 wrote:

Got mine today. 2 quick questions:

1. Is the included battery any good? Or should it just be chucked? (I only have 30Q as spares and it seems like a waste to use them on this lantern)

2. Does it have LVP?

Previous reports show it to be a good battery.

I’m not sure about the lvp.

Yes it has LVP. http://budgetlightforum.com/comment/1340138#comment-1340138

Both questions answered.

Nicolaas wrote:

Just did a quick test of the battery on my Liitokala 500: i got 2621mAh and a relative low internal resistance of 37mR.

Now I know the Liitokala’s are not accurate in measuring internal resistance at all but it does give a usable indication: about the same internal resistance
as a Panasonic 18650B, so it looks like the cell that came with the lantern is not bad at all and indeed quite usable.

Cheers,
Nico

hIKARInoob wrote:

Low Voltage Protection kicked in at 3.07V and 3.15V. A bit on the safe side, but that’s perfectly OK with me.

Cheers

Interested!

This has peaked my interest, can I get a code please?

freeme wrote:

 

 

All SOLD OUT again.

 

 

crotte!
again

That was quick

Still available for the regular price.

Hello, Gearbest! You sell less for $22 than for $16.x

This is a great little lantern, loving mine

Wow, everybody descended on them like ants on a sugarcube…

Thanks,
I just ordered one
(thought it would be unfair to buy more when only 15 lanterns are available)

And shipped within 3 hours.
It doesn’t matter it is on the slow boat from china.

Some mentioned the tailcap getting warm/hot, it seems it is a feature.
Fenix says about his CL25R ($60 ):
- Excellent cold-resistant design. The Zanflare has a similar construction with a metal tube inside.

And other stuff I found interesting about the Fenix:
- Red light preserves night vision and doesn’t atract flies.

- RobertB has a review about CL25R and clones. He uses some Lee filters to get a better tint on all lamps.
http://budgetlightforum.com/node/55551
Clone he bought: https://www.amazon.com/Waterproof-Shockproof-Emergency-Rechargeable-Flas...
- A clone with 22mm ID
http://s.aliexpress.com/byMnQJzu
- “ I picked up some Lee filter material. 205 Half C.T. Orange Gel sheet from Knight Sound and Lighting This gel is supposed to correct 6500k light to 3800k tungsten light. I cut the gel wrap with a paper cutter in a strip to 2 5/16” wide, and scotch taped it to the clone lantern. “
http://www.goknight.com/lee-filters-lighting-gel-sheet-205-half-cto/

Interested

Thanks for the code Freeme. I just ordered one. Shipping August 8-11.

RobertB wrote:

Weird. I never noticed the tail cap on mine getting hot, so I just now tested it. Left the light on for about 15 minutes on high. Tail cap never got above room temp. 25C (77.5F). I bought mine before the GB started when the T1 first came out for sale.

!{width:50%}https://i.imgur.com/MexcESG.jpg!

Robert can measure the temperature on your Fenix CL25R too?
I saw a pic from Fenix it use the bottom as dedicated heat path.

The pic is the 3th here http://www.akkushop-schweiz.ch/ch/fenix-cl25r-led-campingleuchte-aufladb...
(We call it little pinguin)

Hi, is there still a Chance to get a Coupon?

I am very interested.

Thx

Ordered 2. Thanks Freeme again

Ordered 2. Thanks Freeme

Can I get a code of it’s still available at the group buy price

Thanks in advance

Looking for a code also. Thanks.

Ordered one, thanks!

interested!!

Ordered 1, thanks!

Thanks for the code, just ordered one!

Tried ordering,but the coupon has reached its maximum limit.

Is it a daily thing ? The max limit on the coupon

Ordered one lantern.
Thanks for the code