Emisar D4S review

FOCUS!!!

knives>flashlights

Sooooo…
D9S when?
D12S when?
D15S when?
D18S when?

I need more Emisar lights - period.

sorry :frowning: got carried away :slight_smile:

I just received… a D4 instead of a D4S :frowning: More waiting ahead.

What is the range of the beam Emissar D4S / How many meters?

I used my copper Sinner with the enlarged copper head and 33mm Quad Noctigon with Samsung LH351D emitters last night and the hot spot is pretty large, out in the open the “throw” is not very impressive at all. I knew that going in of course, so I carried a thrower with me on the walk down to the road. I hadn’t realized just how warm my 5000K 80CRI Samsungs are until last night out in the open, the color or tint is almost warmer than I care for, especially compared to my Nitecore headlamp I was wearing. Still, all in all I like the light for it’s power and clarity….

Had been planning to put the Samsung’s in my D4S when it gets here (tomorrow supposedly) but now I’m not so sure about that…

Yes it is a BM 940, with a lot of wear and use on it.
>>> This is a focusVVVV
!https://goo.gl/images/khEoga!

Hmm I may have to order another. “Shakey Hands” McGee here, means no trying to flow emitters for a few more weeks. Now if we could find a different color for the locator leds (would love to see a red or orange possibly purple).

I am also told that on the D4S the Angie Optic is glued to the 33mm Noctigon board and the legs will break trying to remove it. So it may be wise to have a replacement optic on hand before attempting to change emitters… :wink:

So did you break yours or are you still waiting for it to be delivered so you can verify that?

Mine is supposed to be here tomorrow.

Richard is the one that told me how difficult they are to modify. (Mountain Electronics) If anyone should know, he’s the man! :wink:

Unless you’re talking about something else, the optic in my D4S wasn’t glued down at all.

Anyone know if the option of Samsung emitters is on the way? Thanks

That’s very interesting Herb, Richard told me they’re glued… solidly. I wonder if there is some variation on how these are assembled, like maybe some of the workers use different methods? Did you get yours from Richard or directly from Hank at Intl-Outdoor?

I will see tomorrow on the green one I ordered from Richard, should be here in the mail…

I ordered mine from Intl-Outdoor. Richard might have gotten a different production run or something where they are glued in, I don’t know. Mine literally fell out when I took the bezel/lens off and turned the light over.

Mine was not glued

My green d4s from intl not glued either.

I am going to drop fireflies rot66 and pick up a few more d4s… what do you guys think about nichia 219ct 5000k and xp-g2 4885k ?

Purchased from Mtn.Electronics, no glue, very clean…