The BLF GT70 "Giggle Monster" is here! 7,500lumens, 1,500m throw! Group buy Closed!

Here is the ‘Tint Chart’ to… while we’re at it. :wink:

Received the BLF GT CW this past week. Customs opened the box but everything was there and in great condition.

This is my first BLF GT - it’s much larger than I thought! Works great with some 30Q batteries. Everything is very well built and intuitive (great interface). Thank you for organizing this!

Thanks Teacher, spot on. That is exactly the information that I was seeking.

My pleasure my friend, glad that was it. :+1:

I have asked Richard for this led:

He told me, that the order code is this one:
XHP70B-00-0000-0D0BP20E2

But I don´t know, which one 2A, 2B, 2C or 2D?

I´ve asked him again.

MTN offers this LED also dedomed (and polished if needed) on Copper DTP 12V Board.
But MCPCB is only 20mm.

That’s the one I mentioned earlier. I received it just the other day. I plan to install it in the next couple of days. I don’t think there’s any way to know for sure what the color tint is but I’ll tell you if I see any green in it.

Do you plan to dedome this, or have you ordered a dedomed one?

Thanks a lot.

Opening flashlight, (reflector without fingerprints, dust…), removing, reflowing, mounting, centering an new LED, if first one is green, is about some hours work for me, I´m doing this not so often…
so it would be better for me to know, what result could be.

Whitwallshot in “green” is no problem for me, but I like warmer tint (more yellow or red) in nature…

This is going in an L6, dome is staying on.

I bought this LED from Mouser a few months ago and it was too green for me, so I immediately replaced it with a 1D.

Which led do you mean? There is no link

So I will have another tint shift with dedoming…
I think I´ll order some more LEDs, dedomed for testing…
another USD50 more… ;).

Maybe these:
Cree XHP70.2 P2 5700K on DTP MCPCB (5700K)
Cree XHP70.2 P2 1A on DTP MCPCB (???K)
and this for the cold days with warming tint:
Cree XHP70.2 P2 4000K on DTP MCPCB (4000K)

Kaidomain have this with 6000K:
http://kaidomain.com/Cree-XHP70_2-P2-1A-White-6000K-LED-Emitter?search=xhp70.2

What are you talking about? Did I miss part of the conversation?

I want a NW tint after dedoming myself or buying one LED from MTN already dedomed…

Sorry for confusion…

Referred to the LED we were talking about, BP20E2

Thanks for that info, but it is not clear, if mouser sells same colour bin like MTNelectronics.

Or have I missed some infos about order code?
Oder code:
XHP70B-00-0000-0D0BP20E2 does not say anything about colour bin (tint)
This is an output bin P2 and a CRI 70.

So your saying the one you bought at Mouser is the same exact one that MTN Electronics is selling? How do you know this? I can’t find much info on Richards led.

I asked richard for order code. Order code of his LED, it´s this:
XHP70B-00-0000-0D0BP20E2

I think LEDtec means, that mouser order code was the same (XHP70B-00-0000-0D0BP20E2)

But this is no information about colour bin (tint)…

Thank you very much Jason, for this info!
This list is cool.

I just wanted to be sure, not to buy a wrong item…
If all XHP70.2s look the same, I’m on the safe side…

Not all LED’s look the same. I have seen differences in the LED in the same reel and have noticed large differences when buying the same model from different suppliers.

Yep! The only 70.2 I seen called out by tint is the 1A and they vary alot also, just check them out under a UV light, sometimes the 4 dies don’t even match…each other… it’s crazy! :smiley: