Lumintop GT Mini (Thower) Beam shots and more!

Thanks again Jason, you teach me something new and interesting everyday,
I thought about the possibility of it being glued and thought about trying heat but I remember what my bezel looked like after I did that to ano before, sort of a nice brownish color so that idea was short lived.
Not even sure why I wanted to take the bezel off frankly, I just like taking lights apart I think.
Well it is a good little light and yes the big GT’s I bought three of so far and I’ve taken them apart and boy oh boy is that a job.
I read that Lexel was having some kind of surgery on his hand but I do think I’ll take a look at those drivers you suggested when he’s better,
Thanks again as always.

I retest the lumen again after i calibrated the TA tube.

Mini gt cw 1286 lumen @ 5 seconds… ( same as turn on )…

While I did not actually make the “base driver design” as they simply copied the TA drivers and there was not much I needed to change, I did help them prototype it and took care of the firmware. Although I can’t remember if they did the same thing as the GT70 and used a prototype firmware as the final firmware, think I got them to use the final firmware in the mini-GT.

Some testing I did recently for my A4 video.

Do you know the runtime for this flashlight? Could not find it at lumintop.com. Thanks!

It will depend on the battery used and mostly what output level you use. On moon mode it will run for months on turbo maybe an hour.

Awesome, thanks Texas! Could you recommend any battery? I’m looking for long runs for EDC.

I like the “GA” 3500ma cells personally for most things. The 35E is another good cell.

if u dont want to use the 30q samsung high drain battery get one with as high capacity as possible like 3500mah keeppower or similar but its recommended to run unprotected.

My GTmini had lots of threadlocker, which covered all the threads. Using two harbor freight rubber strap wrenches, it separated nicely with some force. No marks left. There are two orings. One between the glass and the bezel, and one on the head at the base of the threads. Using a pick, some naptha, and a micro fiber cloth, the threads came clean. Re-greased with silicone grease, and the bezel comes off easy and smooth now, for future modding if I ever decide to. For right now, it’s a wonderful light just the way it is.

That thread locker will only get harder over time, so if you want to get it apart for future use, I’d do it now and not wait.

Excellent advice. :+1:

These are the best for high capacity and high quality. Sanyo/Panasonic 3500mah GA (not the old 3400mah B), LG MJ1, Samsung 35E and 36G, Sony VC7.

Keeppower rewraps some of these cells. You just have to know what is under the wrapper.

Awesome guys, thanks for the help. Just order my GT mini (NW), first flashlight! :smiley:

Another question: any website in US where I can order the Samsung’s 35E? Banggood does not ship to Brazil, but since my aunt is coming from the US, I’ll order from there.

https://liionwholesale.com/collections/batteries/products/samsung-35e?variant=6101118091296

Also here.

https://www.imrbatteries.com/samsung-35e-18650-3500mah-10a-flat-top-battery/

And here

Button top here

http://www.mtnelectronics.com/index.php?route=product/product&product_id=920&search=35e

Lumintop BLF GT mini

Coupon code: ab8a87

Final value: US$32,00

Looks like this code is expired. Any new code for getting the price down?

Check out M4DM4X and/or ‘NealsDeals’.

My GT mini NW is not glued. I will check my CW tomorrow.
I replaced the led with Luxeon V.

Thanks everyone for the comments. Especially to those of you giving quality answers to the questions asked here since some how I deleted the message that said I had updates on this thread. LOL!!!