GB Clone Offically "SOLD OUT" 10/21/18 XPL HI 1300LM Focusing AKA Cometa 2016

My order was placed 2 days ago, and still shows “back order”

Mine took slightly more than 24hr from processing to shipped.

Yea i ordered mine on the 21st but it could have been the 20th USA time. Just shipped a few hours ago.

Same.

Those two pages I linked to were the original pages from 2016 during the GB, one with cell and one without.
When they lowered the price dramatically they should have removed the free cells since they now cost as much as the light and they will most likely be trying to get out of sending the cells, they are losing a lot of money, but BG can be as dumb as a box of rocks at times, or so I’ve noticed…

Wholesale price the cells will be worth like 3 or 4 USD max.

Hadn’t thought down those lines and you’re right but those Chinese are very cheap and that’s a lot of money to them, I bet this thread alone has bought every light they sold so far since lowering the price like that, but I still think that they forgot about the free cell on that one page I linked, those two pages have always been there since the GB, but beats me, sure hope they stand up and ship the ordered lights.
It really must have been a mind bender to suddenly see the sale of the Cometa go off the scale like it did in the last 24 hrs. Bet they know who would have bought them all as well, it’s those same BLFers who came up with all the fixes to this messed up light… ha ha, it’s a heck of a deal.

I read some manufacturers hate Banggood and stopped doing business with them because they sell a lot of things at cost, which kills off other smaller retailers that actually provide warranty service. In this case, I’m betting this is sold at or even below cost, so even an additional $3-$4 (maybe more as I’ve found wholesale sometimes is not as cheap as I thought) would bring them further into the red. Normally I would rather buy from MTN, Illumination Gear, etc. even if it cost a bit more. However, this current price of $15.99 is a STEAL (compared to the Jaxman Z1 I always wanted to try) I cannot resist and the light is not available elsewhere, which is why I bought 2 and I don’t care about getting free cells as I don’t feel a need to have a company lose money even if they made a clumsy mistake.

Also I have my own business too, so I can feel for other businesses. Sometimes people don’t understand we need to make a living too and without profit, we basically have no income to feed our families, which is why I hate doing business with people that want to see me lose money so they can score a great deal.

This company deals in fairly small volume so i expect the prices to be fairly high compared to what these big company pay.

!

!

Nice find, thanks.

I intend to do the same when mine arrives. I take it you used the original driver?

1. Can anybody say if the Shockli 26650 5500mAh fit the Cometa (everywhere they say the batteries are a bit bigger)? And has anybody experience in ordering this cells directly from Shocklis Ali store (shipping to Germany). Because i am going mad if i see the price here in germany. GB 2xpcs 12,93€ (but no delivery to Germany), here i pay 16-20€ for 1 cell + 5-7€ shipping. Thats crazy!! If ordering from Aliexpress is ok i can get 2 cells for ~18€. That would be ok.

2. Did anybody have the exact Dimensions from the lens? I am checking www.thorlabs.de and www.optolife.com for a lens. Or maybe someone can point out the right lens with Multilayer AR coating.

That issue with the driver as I recall was that area the driver sat in was to deep and would cause the spring to lay over when you put the cell in and it would short out, What I did was to take a copper washer that was the same diameter as the driver pockets shelf and when you put the driver and the retainer ring back on I lucked out with the thickness of that washer and it brought the driver up to the right height, or other used a plastic insulator ring, either way it wasn’t hard to fix and it is a good driver, ATTiny25V-based driver with off-time capacitor and FET+7135 power channel configuration. (17mm) This light has the lighted tail switch also, well it did…

The specs from BG on this light are 130mm(L) x 53mm(Head) x 33mm(Body) the lens is supposed to be the K9 with double or both side AR, but I wouldn’t hold your breath on that I sure hope that the lens is still the K9, as far as actual diameter of the lens I don’t know and I haven’t gone over to my shop and looked through all those boxes of older lights for those Cometas, once a light ends up over there I’m usually fairly well done with it or lost interest, I will probably go over tomorrow and see if I can find them.

interesting to see if these have the lighted tail switch as it is not mentioned in the description…

You would have to go thru the Cometa thread to find out for sure, unless somebody has one they can measure now? But I posted these pics back then, but one was from the Cometa and one was from the Z1 I just can’t remember which is which, but they both worked. I’m thinking the bigger was from the Z1 and it fit better….

Hope the original lens is good. Because (i might be wrong) there is no plano aspheric lens with OD of 45mm at this two stores.

Here’s the old Cometa GB thread, the specs should be in there and a lot more, wow brings back major headache just looking at it… Cometa

Cool.

BTW, NO THANKS for buying light regardless of how low. Banggood FRAUD waiting to happen. Be CAREFUL guys!!!

Banggood is good seller that ship orders if they have stock, i don’t think it is fraud but their system is not perfect when it is clearance and stock counts are inconsistent in last few hours.

Yea i used the stock driver mate. I regularly use these drivers for different mods.

I have a tear down from 2016

The lens is like 45mm AR coated glass which is why i bought a new one because i stuffed mine lol. They are pricey and hard to find.