This may be a dumb question but where can I check my order status? I know it’s not going to be updated just yet but where can I find my order? Lumintop’s website does not have a login area for me.
This may be a dumb question but where can I check my order status? I know it’s not going to be updated just yet but where can I find my order? Lumintop’s website does not have a login area for me.
At the top left corner of the lumintop website is a sing in option to your account.
This may be a dumb question but where can I check my order status? I know it’s not going to be updated just yet but where can I find my order? Lumintop’s website does not have a login area for me.
At the top left corner of the lumintop website is a sing in option to your account.
Well apparently there are two websites. After digging around the confirmation email of my order, I found the correct site. I was trying at lumintop.com. The correct one, in case anyone asks, is lumintoponline.com.
Thanks TA.
How do I get a conversation kit and batteries? I put my name down for one in the beginning but I’ve been away for quite awhile and not sure how to get one
How do I get a conversation kit and batteries? I put my name down for one in the beginning but I’ve been away for quite awhile and not sure how to get one
How do I get a conversation kit and batteries? I put my name down for one in the beginning but I’ve been away for quite awhile and not sure how to get one
The conversion kit is $50 $55 with the group buy. Soon to be over in 3 days. I’ll send you the PM with all the details.
Ps, I don’t think they can ship batteries outside of a light. So if your just buying a conversion kit you would have to get the batteries some place else. Sorry, its these new Liion battery shipping laws.
—
Texas Ace Lumen Tube and JoshK Sphere calibrated with Maukka lights
I am watching the 21700 discussion closely. A strap would be required if that change was made to the new light.
Also, a quick recap on the KD XHP70.2 80CRI LED’s from a page ago. With my internet being down I went ahead and put together my MT09R with those LED’s and I am very impressed. The tint is great and output is good as well.
Compared side by side with the 80CRI LED’s I have been using the lumens are around 10% lower it seems (most likely they do not have the same silly low vF).
The tint if anything is a little better then the LED’s I have been using, very minor difference and most likely would not notice it unless you had them side by side but the KD LED is a little rosier.
Overall I would run either of them without a problem, the choice os slightly more lumens or slightly rosier tint is not enough for me to worry about.
Great thanks for the info! I think eventhough it doesn’t have the silly low vF for max output, it is at least 10% more efficient so longer run time and runs cooler. Good to have this option. Hope you bought it with the 10% coupon code “newgrandkd”. If that doesn’t work anymore, there is still a 5% coupon code “blf”.
I just had Vinh swap this KD 80CRI in my TC20vn and it came back ugly yellow looking like the LH351D and 219C 4000k. I took out the reflector and shined it against a wall and it was even rosier than my other 5A, 5D, E21A and 219B 4000k 9080 flashlights. It’s shocking how much the reflector can screw with the tint. I’m guessing it bumped up the DUV by at least 0.08. Otherwise, this emitter is super rosy and I think perfect for dedoming since that should bring it back to the BBL.
I am watching the 21700 discussion closely. A strap would be required if that change was made to the new light.
Also, a quick recap on the KD XHP70.2 80CRI LED’s from a page ago. With my internet being down I went ahead and put together my MT09R with those LED’s and I am very impressed. The tint is great and output is good as well.
Compared side by side with the 80CRI LED’s I have been using the lumens are around 10% lower it seems (most likely they do not have the same silly low vF).
The tint if anything is a little better then the LED’s I have been using, very minor difference and most likely would not notice it unless you had them side by side but the KD LED is a little rosier.
Overall I would run either of them without a problem, the choice os slightly more lumens or slightly rosier tint is not enough for me to worry about.
Great thanks for the info! I think eventhough it doesn’t have the silly low vF for max output, it is at least 10% more efficient so longer run time and runs cooler. Good to have this option. Hope you bought it with the 10% coupon code “newgrandkd”. If that doesn’t work anymore, there is still a 5% coupon code “blf”.
I just had Vinh swap this KD 80CRI in my TC20vn and it came back ugly yellow looking like the LH351D and 219C 4000k. I took out the reflector and shined it against a wall and it was even rosier than my other 5A, 5D, E21A and 219B 4000k 9080 flashlights. It’s shocking how much the reflector can screw with the tint. I’m guessing it bumped up the DUV by at least 0.08. Otherwise, this emitter is super rosy and I think perfect for dedoming since that should bring it back to the BBL.
Interesting, I have noticed that the GT reflector tends to mix in the tint shift into the beam and make most LED’s more yellow then normal.
In the MT09R I really like these LED’s. If they didn’t have the XHP70.2 tint shift they would be almost the perfect tint.
Ok, I just got confirmation that the GT70 and conversion kits have been shipped out as of today!
The tracking numbers will be next week at the earliest before they are ready but they are on the way.
My conversion kit still shows “Waiting for Shipment.” If tracking numbers aren’t sent out by the 1st, I’ll be filing a PayPal dispute. The 1st will be 7 weeks since I ordered it. If the product isn’t ready, then don’t ask us to pay until it is ready.
Ok, I just got confirmation that the GT70 and conversion kits have been shipped out as of today!
The tracking numbers will be next week at the earliest before they are ready but they are on the way.
My conversion kit still shows “Waiting for Shipment.” If tracking numbers aren’t sent out by the 1st, I’ll be filing a PayPal dispute. The 1st will be 7 weeks since I ordered it. If the product isn’t ready, then don’t ask us to pay until it is ready.
I am very sorry for that, although I am not sure how to ordered the conversion kit 7 weeks ago? I thought the conversion kits were only listed for sale at the start of this month? Maybe I am thinking of the NW kits.
I know I asked them to not list the kits until they were ready for shipment but they did anyways. I just thought it was 3-4 weeks, not 7 weeks.
There will be no need for a paypal dispute, you can simply email Leo and he will take care of you.
That said, I got confirmation last week that they were all shipped out but tracking numbers would take longer then normal since they are going regular mail and not DHL.
I placed the order Sept 13th, which is when everyone on the list got the email with a link for payment.
I have a GT so I really want this conversion kit. I was stoked to hear about its development! I’ll buy one regardless… but constantly hearing “next week, next week, next week” and reasons why they don’t get shipped, or can’t get tracking is aggravating when they have held my money for almost 7 weeks now.
TA I know this is out of your control, and I greatly appreciate you coordinating this for all of us. I just wish Lumintop was a bit more honest with the readiness of the kits before asking everyone to pay up.
Ok, I just got confirmation that the GT70 and conversion kits have been shipped out as of today!
The tracking numbers will be next week at the earliest before they are ready but they are on the way.
My conversion kit still shows “Waiting for Shipment.” If tracking numbers aren’t sent out by the 1st, I’ll be filing a PayPal dispute. The 1st will be 7 weeks since I ordered it. If the product isn’t ready, then don’t ask us to pay until it is ready.
So even though you knew what you were getting into right from the start, and everybody has been absolutely up front about every aspect of what has been going on with the orders from the very beginning, and you have been told they have all shipped, now you decide to threaten to file a Paypal dispute if you don’t receive a tracking number?
The greatest flashlight of all time!
It is great, glad you LOVE it.
I'm ThatCrazyFlashaholic 67
This may be a dumb question but where can I check my order status? I know it’s not going to be updated just yet but where can I find my order? Lumintop’s website does not have a login area for me.
There’s no replacement for displacement.
My NW conversion kit was tucked inside the box with my GT70 so I would assume the single order conversion kits should be arriving very soon as well.
Which should i get CW or NW?
Help me decide.
lol, first time I have seen someone use gloves to handle this light.
Glad you like it!
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
At the top left corner of the lumintop website is a sing in option to your account.
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
Unless you will be de-doming I would go with NW, it does not have as much light saber effect but looks better in every other way IMHO.
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
Well apparently there are two websites. After digging around the confirmation email of my order, I found the correct site. I was trying at lumintop.com. The correct one, in case anyone asks, is lumintoponline.com.
Thanks TA.
There’s no replacement for displacement.
Listen to Mr. Ace and get the NW. It really does look better to most people.
I just got word, the Group buy will be closing on Oct 31st.
So if anyone wants in on the group buy, now is your last chance.
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
Can I buy another conversion kit?
Sure.
Texas Ace Lumen Tube and JoshK Sphere calibrated with Maukka lights
Click this to go to signature links. I'm still around, just not reading many new threads.
How do I get a conversation kit and batteries? I put my name down for one in the beginning but I’ve been away for quite awhile and not sure how to get one
Link is in the first post of this thread… http://www.lumintoponline.com/lumintop-gt70-conversion-kits-p1523919.html
They put them on sale recently not sure if the group buy discount is any lower
The conversion kit is
$50$55 with the group buy. Soon to be over in 3 days. I’ll send you the PM with all the details.Ps, I don’t think they can ship batteries outside of a light. So if your just buying a conversion kit you would have to get the batteries some place else. Sorry, its these new Liion battery shipping laws.
Texas Ace Lumen Tube and JoshK Sphere calibrated with Maukka lights
Click this to go to signature links. I'm still around, just not reading many new threads.
The conversion kit price in the group buy is $55. Thanks for sending the info Jason.
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
I corrected my post.
Texas Ace Lumen Tube and JoshK Sphere calibrated with Maukka lights
Click this to go to signature links. I'm still around, just not reading many new threads.
Anyone receiving conversion kits yet?
Astrolux FT03 XHP50.2
Astrolux EC01
Astrolux EC03
Convoy M3 3000k
Sofirn SP40 5700k
Sofirn SP40 3000k
Convoy L6 Mtn Elec D4 UI driver, XHP70.2
Utorch UT02 NW
BLF Q8
BLF A6 NW
BLF GT XHP35
BLF GT70 CW
Skilhunt H03 NW
Astrolux MF02 NW
Astrolux MF01 XP-G3
Sofirn SF14
Sofirn SP32A
Emisar D4 XP-L HI CW
SK68 knockoff
Mini Mag Lite 2X AAA
Convoy M1 build (4X XPL 3V MCPCB, Mnt Elec FET driver)
I just had Vinh swap this KD 80CRI in my TC20vn and it came back ugly yellow looking like the LH351D and 219C 4000k. I took out the reflector and shined it against a wall and it was even rosier than my other 5A, 5D, E21A and 219B 4000k 9080 flashlights. It’s shocking how much the reflector can screw with the tint. I’m guessing it bumped up the DUV by at least 0.08. Otherwise, this emitter is super rosy and I think perfect for dedoming since that should bring it back to the BBL.
Don’t forget about the anti-reflection coating on the lens that also messes with the tint.
Texas Ace Lumen Tube and JoshK Sphere calibrated with Maukka lights
Click this to go to signature links. I'm still around, just not reading many new threads.
Interesting, I have noticed that the GT reflector tends to mix in the tint shift into the beam and make most LED’s more yellow then normal.
In the MT09R I really like these LED’s. If they didn’t have the XHP70.2 tint shift they would be almost the perfect tint.
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
I took out the lens but no difference. Not sure if it is AR lens or not though.
My conversion kit still shows “Waiting for Shipment.” If tracking numbers aren’t sent out by the 1st, I’ll be filing a PayPal dispute. The 1st will be 7 weeks since I ordered it. If the product isn’t ready, then don’t ask us to pay until it is ready.
I am very sorry for that, although I am not sure how to ordered the conversion kit 7 weeks ago? I thought the conversion kits were only listed for sale at the start of this month? Maybe I am thinking of the NW kits.
I know I asked them to not list the kits until they were ready for shipment but they did anyways. I just thought it was 3-4 weeks, not 7 weeks.
There will be no need for a paypal dispute, you can simply email Leo and he will take care of you.
That said, I got confirmation last week that they were all shipped out but tracking numbers would take longer then normal since they are going regular mail and not DHL.
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
I placed the order Sept 13th, which is when everyone on the list got the email with a link for payment.
I have a GT so I really want this conversion kit. I was stoked to hear about its development! I’ll buy one regardless… but constantly hearing “next week, next week, next week” and reasons why they don’t get shipped, or can’t get tracking is aggravating when they have held my money for almost 7 weeks now.
TA I know this is out of your control, and I greatly appreciate you coordinating this for all of us. I just wish Lumintop was a bit more honest with the readiness of the kits before asking everyone to pay up.
Yeah still waiting for any notice on my cw conversion I ordered in early sept. I’m it’ll get here eventuality.
My Light Collection
I asked lumintop to get the tracking numbers sent out as quickly as possible. I am waiting on a reply now.
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
So even though you knew what you were getting into right from the start, and everybody has been absolutely up front about every aspect of what has been going on with the orders from the very beginning, and you have been told they have all shipped, now you decide to threaten to file a Paypal dispute if you don’t receive a tracking number?
Unreal. Just…unreal.
Pages