【convoy】H4 and B35AM options are updated

Commercial Sellers' Spot
2

Hey Simon, I think there is something wrong with your shipping info. All lights say $57.54 to ship to Canada with no other option available?

3

something wrong with the aliexpress system,
although strike stopped for a long time, but the system still dont supply air mail shipping option.
i have a paypal account, you can leave me the screen capture of your cart on aliexpress

4

Hi Simon what gasket you use for C8+ and S2+ (nichia version)?

5

Ok thanks.

6

Hi Simon, nice to see you here. Can a 8*7135 driver be ordered for the C8+ ?

7

Hi Simon,

could you please specify the flux bin of the leds?

8

Guys, it’s much simpler to message him on AliExpress.

9

10

A good and very welcomed step forward, Simon :slight_smile:

11

i dont recommend 7135*8 ,friend

12

ICH0BA-sm575D240L2R9050
ICH0BB-sm405D240L2R9050

13

People use a FET driver for the 219C all the time. The 219C current rating is very conservative. It’s unlikely that 2.8A will cause any issue as long as the MCPCB has DTP.

14

uh,i just dont recommend :slight_smile:

15

I have used a 219c in an S2+ for a few years now at 2,8A.
It gives a very nice beam, but after a couple of minutes, it gets hot though.

Any chance for a stainless steel L6 bezel Simon?

And a lighted sideswitch as a spare part?

16

No problem with production of the bezel, i just think few people demands it.

i had driver with lighted side switch before,

17

I have those gaskets. Thanks :slight_smile:

18

Great to see you on BLF Simon!

Nice you started offering high-cri convoys. However most producers seem to implement the SST-20 or LH351D high-cri leds instead of the somewhat oldish 219C.
Imho the OP reflector should be by default in the S2+ instead of the SMO since the S2+ is an allrounder/EDC light, not a thrower.

Please consider using the well regarded and desired XPL HI 5D or 5A with a nice tint instead of the ugly and yellow XPL HI U6-4C.
Emisar sells the 5D with great success.

19

The SMO is quite new, all my S2+ lights came with the OP standard (except the clear anodized XPL hi version)

1 Thank
20

Please Simon build a 21700 C8 with sst-40

21

Maybe we should open a new thread with requests, to see what people like.
On this way Simon can see what might be a succesful lights.

We all love convoy, since it it is proven quality an its mod-ability friendlyness, with a bunch of spare parts to change the light to our wishes.

I would like for example a single cell light like a Emisar D4 from convoy, with Narsil UI but with a smooth Stainless steel bezel (like the Jaxman E2L.)

It would be nice to have the option for multi or single emitter with optics or reflector (like Emisar has multiple choices)
Or something like a XHP50 on a single cell from Convoy with a new sleek design.

Regards Pieter