Convoy L2 XHP50.2 K2-1C outdoor performance

Simon is the owner of convoy. This light will be for sale soon.

Unlikely, as the XHP35 is only available in a 12V configuration, which would require the use of a boost driver. The XHP50 and XHP70 are also available in 6V configurations, which is what Simon is using here. Powering a 6V emitter with two cells in series is relatively straightforward. Developing a 12V boost driver would be considerably more difficult.

yes, i will get the XHP35 driver sample for L2 several days later
but the max output current is 1000mA,
is it too low?

i supply driver ,too
i know some BLFers already have L2 flashlight,they may DIY it themselves

i dont have 26mm DTP copper board
it seems that 25mm is regular size ,i can get some from manufacturer

i will supply XHP35 driver for L2 flashlight soon :smiley:

You can give 2000mA to the XHP35 and it will good. Maybe measure heat and add a timed 5 minute stepdown on turbo.

Thanks, 25 mm would be good. I will message you on your AliExpress store.

Edit : I don’t see 5000k at your site. Not available?

no 5000K in stock presently ,i will order some if you need it ,my email is 468924022@qq.com

Good news but 1000mA is quite low I would like to get 2000mA .

i will get some 25mm xhp50 DTP board samples tomorrow

Simon, is there any chance to get the Convoy L6 tail cap / tail part as spare part?

It would be great to use it for high current purposes on other flashlights.

I plan to make a considerable purchase order on your webshop and this would be the icing of the cake. :LOVE:

Thank you.

Are you just talking about the inside switch

No, actually I'm looking for the entire tailcap unit with the outside switch.

i dont have spare tail
but if you need the tailcap and the switch ,i can send you some for free

If there is an XHP35 model coming I will definately be buying one of those. Hopefully there will be a 3500/4000K version. That would be awesome.

Thank you Simon, that would be great! I will leave a message in my AliExpress order. :-) :BEER:

I think, this set could be good for a premium XHP35 HI L2 variant:

5700K 90CRI - Pure white:
XHP35A-H0-0000-0D0UC257E or XHP35A-H0-0000-0D0UC20E2

4500K 90CRI - Neutral white:
XHP35A-H0-0000-0D0UB445E or XHP35A-H0-0000-0D0UB40E4

3500K 90CRI - Warm white:
XHP35A-H0-0000-0D0UB235E or XHP35A-H0-0000-0D0UB20E6

I think, 80 CRI emitters could be also considered, but a high CRI thrower looks brilliant.

Another (probably stupid) question: If I add multiple items to my shopping cart and choose "ePacket" as shipping method it looks as if I am being charged for shipping cost for each item again and again. In the end this adds up to quite a big amount of shipping cost. Is this correct this way or am I overlooking something and it can be corrected later on before I actually pay with PayPal?

Looking great Simon!!

Good to hear your are still bringing out some new stuff.

About the XHP35 driver, go with a minimum of at least 1500mA, 2000mA would be great if possible.