Domari Nolo “I Refuse to be Subjugated” (1st Pennsylvania Regiment Flag) https://www.1stcontinentalregiment.org/blank
(Flagguys.com):..and man o man did they ever refuse to be subjugated. These guys were everywhere. They were important in Washington’s siege of Boston. They stayed behind and were the last to leave after covering the main army’s dangerous nick of time retreat from Long Island. They crossed the Delaware with Washington. They were “..at Brandywine, Germantown, Monmouth, and every major skirmish, and battle all the way to Yorktown..” where they fought “the most important part of the siege” according to General Steuben. These guys saw action in every one of the original 13 colonies.
Light looks great, the beam shot even better. I have been waiting for this for a while. Looks to me as if it will find a everyday place in my pocket. I think I only put myself down for one 5000K light. I would like to add an additional 5000K light. For 2 total lights. Pretty late in the list so I understand if I won’t be able to order the second one at the same time.
Thank you everyone for all the hard work.
EDIT: Never mind. I did what I should have done and searched the thread first. I see I am already down for 2 lights. Sorry.
This looks like wallet torturing
I will resist…I hope…
It is looking pretty good so far
OP can be later updated with photos of the latest/last version, TK? And thanks again for the work done so far!
And to tatasal, thanks for these latest news !!
Thanks very much for the update TK. It looks like a crisp and clean design that should satisfy many who want a short bulbous triple using known-good components. That might be able to sustain 3 or 4 hundred lumens. Like any other such torch with x8 7135s (hopefully good ones). No FET actually required.
At least it has no switch or aux. LEDS, (vomit) so the design is still pure in that respect.
The thing is, by now it should have been re-designed with a tube to take 21-70 cells. The head and tail are so fat that the slight extra width and length of the tubes would hardly be noticed, and it would be so much trendier (assuming 18650 adaptor also included, for real people). Missed opportunity. Joke.
Fingers crossed that it progresses briskly now, and proves reliable. Good to see that you already have one yourself, of the latest version. That’s quite a relief, now that Fritz seems to have become a “sleeping partner”.
Running into four prototypes over several years made me despair a little. That’s not a normal product development time-scale for this sort of thing. I expect absolute perfection after all that process.
Thanks for your, and the other people behind the scenes’ efforts, and apologies for any undeserved chivvying and sarcasm/irony.
Honestly, you seem to be doing a great job, despite extreme adversity, and that is admirable.
So, when should I expect to pay for mine, and to whom ? Has Neal got that sorted out yet ?
@TK
i already told Neal that a colored manual is a MUST (for every Anduril driven light)
i hope he can convince the manufacturers
Sounds good. But that’s extra cost for the manufacturers, many of whom probably routinely only make black and white manuals.
Rather than trying to get manufacturers to change, it’s probably much easier to just make a black and white compatible version.
Also, there’s no need to have just one version: Keep the color version, just also make a black and white alternate version.
Honestly I think a good manual should be readable and usable in color AND black and white. I don’t see a reason for two different version when all it takes to make it b/w friendly is probably just some different line pattern.
Study the manual at BLF, Every day until the light arrives. You might need the manual for 10 minutes if you need to set the thermal config. By the time you do that it will be second nature. Anduril is very smooth.
I’ll take another 3 (6 total) if the price remains reasonably consistent with the initial estimate. I’d be happy to buy them without LEDs if the XP-L version is the only initial offering. Still waiting to hear whether a good tint bin of LH351D was secured.
@TK
i already told Neal that a colored manual is a MUST (for every Anduril driven light)
i hope he can convince the manufacturers
Sounds good. But that’s extra cost for the manufacturers, many of whom probably routinely only make black and white manuals.
Rather than trying to get manufacturers to change, it’s probably much easier to just make a black and white compatible version.
Also, there’s no need to have just one version: Keep the color version, just also make a black and white alternate version.
Provide a .pdf color version that can be downloaded/printed and, to keep cost down, ship with the black and white version…… or make your own color version with photoshop……. that being said, this should be far down the list of priorities.
—
Im not a Pessimist …. just an Optimist with a lot of experience
It seems I need to stop procrastinating and update the UI diagram so it won’t require color. When printed on a black-and-white printer, it can be hard to tell the difference between single clicks and double clicks.
I have considerable experience with these types of illustrations and diagrams, and would be happy to help if needed. Just a friendly offer
Location: (469219) 2016 HO3 // I get way more privmsgs than I can respond to, so please ask in a public thread if possible, for a faster answer.
joechina did most of the work for making the UI diagram more black-and-white printer friendly. I’ve been meaning to merge his changes for a while, but I keep getting distracted…
Anyway, here’s an updated diagram which uses two parallel lines for the green / double-click actions. Also, click the image for a much larger version for printing purposes.
Location: (469219) 2016 HO3 // I get way more privmsgs than I can respond to, so please ask in a public thread if possible, for a faster answer.
chadvone wrote:
Looks the same
Mostly, yes. I just needed to make the 1-click black lines and the 2-click green lines more visually distinct in ways which are visible on a black-and-white laser printer.
Mostly, yes. I just needed to make the 1-click black lines and the 2-click green lines more visually distinct in ways which are visible on a black-and-white laser printer.
I don’t see the parallel lines. Are you saying that is something you have to add?
Hi all, My first post here, longtime lurker and flashaholic. Throwing me in for one please! Dark gray, XPL-HI emitter of thats still the option? Ive been watching this for so long Ive lost track of everything on it. Love the look of the HDS style on this and it will be a perfect EDC along with my Emisar D4!
—
Lurking flashaholic, Ive bought all my flashlights through lurking here, BLF A6, Sofirn C8F, Soforn Q8, Emisar D4, and a few not so budget lights but I mod them all the same! Been waiting for the FW3A to come out for years now.......
Location: (469219) 2016 HO3 // I get way more privmsgs than I can respond to, so please ask in a public thread if possible, for a faster answer.
chadvone wrote:
I don’t see the parallel lines. Are you saying that is something you have to add?
I used the same URL as the previous version, so it may be cached in your browser. Try a shift-reload to force it to reload images, or click on the image above for the printer-sized version.
Oh my TK. Only one thing I can say to those photos.
Two more Please.
Looking really nice, that switch is pure class
I’m in for one LH351D, please and thank you.
Domari Nolo “I Refuse to be Subjugated” (1st Pennsylvania Regiment Flag) https://www.1stcontinentalregiment.org/blank
(Flagguys.com):..and man o man did they ever refuse to be subjugated. These guys were everywhere. They were important in Washington’s siege of Boston. They stayed behind and were the last to leave after covering the main army’s dangerous nick of time retreat from Long Island. They crossed the Delaware with Washington. They were “..at Brandywine, Germantown, Monmouth, and every major skirmish, and battle all the way to Yorktown..” where they fought “the most important part of the siege” according to General Steuben. These guys saw action in every one of the original 13 colonies.
Light looks great, the beam shot even better. I have been waiting for this for a while. Looks to me as if it will find a everyday place in my pocket. I think I only put myself down for one 5000K light. I would like to add an additional 5000K light. For 2 total lights. Pretty late in the list so I understand if I won’t be able to order the second one at the same time.
Thank you everyone for all the hard work.
EDIT: Never mind. I did what I should have done and searched the thread first. I see I am already down for 2 lights. Sorry.
"Everywhere I go, there I am"
This looks like wallet torturing
I will resist…I hope…
It is looking pretty good so far
OP can be later updated with photos of the latest/last version, TK?
And thanks again for the work done so far!
And to tatasal, thanks for these latest news !!
MY REVIEWS THREAD /// My Flashlight Collection /// YouTube Channel
Mods: 1 / 2 // TIR: 1 / 2 // Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 /// My Review's Blog (PT) /// OL Contest 2019 /// OL Contest 2020 /// OL Contest 2022 /// GIVEAWAYs: 1 / 2 / 3
I would like to be on the list for 1.
Beam shot had me drooling and images of the light…WHOAH!!
My wallet won’t like it but I may have to request another one.
So yes, one more with LH351D please.
Will have to sell off or use my other multi-emitters as loan-out lights.
I’ve got a thrower, a flooder, and an EDC too. Still looking for a bigger thrower, flooder, and a new EDC, give or take a few. I’m a flashaholic.
Thanks very much for the update TK. It looks like a crisp and clean design that should satisfy many who want a short bulbous triple using known-good components. That might be able to sustain 3 or 4 hundred lumens. Like any other such torch with x8 7135s (hopefully good ones). No FET actually required.
At least it has no switch or aux. LEDS, (vomit) so the design is still pure in that respect.
The thing is, by now it should have been re-designed with a tube to take 21-70 cells. The head and tail are so fat that the slight extra width and length of the tubes would hardly be noticed, and it would be so much trendier (assuming 18650 adaptor also included, for real people). Missed opportunity. Joke.
Fingers crossed that it progresses briskly now, and proves reliable. Good to see that you already have one yourself, of the latest version. That’s quite a relief, now that Fritz seems to have become a “sleeping partner”.
Running into four prototypes over several years made me despair a little. That’s not a normal product development time-scale for this sort of thing. I expect absolute perfection after all that process.
Thanks for your, and the other people behind the scenes’ efforts, and apologies for any undeserved chivvying and sarcasm/irony.
Honestly, you seem to be doing a great job, despite extreme adversity, and that is admirable.
So, when should I expect to pay for mine, and to whom ? Has Neal got that sorted out yet ?
Any idea if the diameter and thickness of the MCPCB is pretty standard? Would a Noctigon/MTN board drop in without filing?
@TK
i already told Neal that a colored manual is a MUST (for every Anduril driven light)
i hope he can convince the manufacturers
PLEASE NOTE
i do not work in "reviews, deals and codes" for the time being
maybe M4D M4X will return one day, but until then:
THANK YOU FOR YEARS OF YOUR SUPPORT AND FRIENDLY CONTACTS!
Rather than trying to get manufacturers to change, it’s probably much easier to just make a black and white compatible version.
Also, there’s no need to have just one version: Keep the color version, just also make a black and white alternate version.
Honestly I think a good manual should be readable and usable in color AND black and white. I don’t see a reason for two different version when all it takes to make it b/w friendly is probably just some different line pattern.
Can you please also make it in Braille?
I’m currently on the list for one flashlight (#1323).
Please sign me up for one more light (total 2 flashlights – one of each emitter option).
Thanks!
Study the manual at BLF, Every day until the light arrives. You might need the manual for 10 minutes if you need to set the thermal config. By the time you do that it will be second nature. Anduril is very smooth.
I’ll take another 3 (6 total) if the price remains reasonably consistent with the initial estimate. I’d be happy to buy them without LEDs if the XP-L version is the only initial offering. Still waiting to hear whether a good tint bin of LH351D was secured.
I would like 2 please
color looks good, its gunmetal grey or how u call it ? and the switch u will be able to hold in for ramping ?
...where Frugal meets with Flashlight!
つ ◕_◕ ༽つ
flashlight manual in braille, you’re killin me…
Provide a .pdf color version that can be downloaded/printed and, to keep cost down, ship with the black and white version…… or make your own color version with photoshop……. that being said, this should be far down the list of priorities.
Im not a Pessimist …. just an Optimist with a lot of experience
A little John Prine
I have considerable experience with these types of illustrations and diagrams, and would be happy to help if needed. Just a friendly offer
joechina did most of the work for making the UI diagram more black-and-white printer friendly. I’ve been meaning to merge his changes for a while, but I keep getting distracted…
Anyway, here’s an updated diagram which uses two parallel lines for the green / double-click actions. Also, click the image for a much larger version for printing purposes.
Looks the same
I think so, but I haven’t directly tested that.
Mostly, yes. I just needed to make the 1-click black lines and the 2-click green lines more visually distinct in ways which are visible on a black-and-white laser printer.
I don’t see the parallel lines. Are you saying that is something you have to add?
Interested in one of these!
I like shiny things
Hi all, My first post here, longtime lurker and flashaholic. Throwing me in for one please! Dark gray, XPL-HI emitter of thats still the option? Ive been watching this for so long Ive lost track of everything on it. Love the look of the HDS style on this and it will be a perfect EDC along with my Emisar D4!
Lurking flashaholic, Ive bought all my flashlights through lurking here, BLF A6, Sofirn C8F, Soforn Q8, Emisar D4, and a few not so budget lights but I mod them all the same! Been waiting for the FW3A to come out for years now.......
I used the same URL as the previous version, so it may be cached in your browser. Try a shift-reload to force it to reload images, or click on the image above for the printer-sized version.
Pages