Convoy L2 XHP50.2 K2-1C outdoor performance

[Simon_Mao]

@bigm

An xhp35 L6 with full function side switch and anduril would be amazing! Please use some kind of ramping e switch action if possible. Also, don’t overlook the low-lumen modes. I love the low on my L6, and think a lower moonlight and firefly set of modes could be useful, especially for using while eyes are dark adapted. It could run forever at one or even ten lumens! I would keep the forward clicky tail switch, but make sure it can be turned on and off with the side switch. The tail switch could be used for signaling, tactical uses, and lock out. A high cri option, like 90+ would be sweet too. Whatever you come up with, I’m in!

Your idea is very helpful to me, the driver manufacturer is making a drive sample for the XHP35 that fits the L6 host.

[skinny_tie]

@bigm

An xhp35 L6 with full function side switch and anduril would be amazing! Please use some kind of ramping e switch action if possible. Also, don’t overlook the low-lumen modes.

I’m not sure how realistic it is, but driver updates based on BLF firmware would be fantastic.

Andruil (or Narsil) on side switch lights would be amazing.

Although I love the 8x7135 Biscotti driver, something like a Moonlight Special style 1x7135 + 7x7135 would be great for a lower moonlight mode in the S series, and a TA style FET+n+1 would be nice in the M and BD series. Obviously these drivers are already available elsewhere but it would be great be able to order a Convey with them already installed.

Getting well off-topic from the L2 and L6, I’d really love to see a T2 with an updated driver - faster PWM, either off-time memory or no memory, and either no strobe or a really well hidden one (four taps). Good 1.5v boost drivers and easy-to-mod AA lights are hard to find.

[mhds]

Your idea is very helpful to me, the driver manufacturer is making a drive sample for the XHP35 that fits the L6 host.

Hopefully this will be XHP35 HI

[HONDARIDER]

Simon,
Do you make a camo green L2? Gearbest is selling one and I ordered it. When I got it today it was the desert sand. I have contacted them with the discrepancy and hopefully will hear from them soon. Just curious if the camo green really exist.

[Simon_Mao]

@skinny_tie

@bigm

An xhp35 L6 with full function side switch and anduril would be amazing! Please use some kind of ramping e switch action if possible. Also, don’t overlook the low-lumen modes.

I’m not sure how realistic it is, but driver updates based on BLF firmware would be fantastic.

Andruil (or Narsil) on side switch lights would be amazing.

Although I love the 8x7135 Biscotti driver, something like a Moonlight Special style 1x7135 + 7x7135 would be great for a lower moonlight mode in the S series, and a TA style FET+n+1 would be nice in the M and BD series. Obviously these drivers are already available elsewhere but it would be great be able to order a Convey with them already installed.

Getting well off-topic from the L2 and L6, I’d really love to see a T2 with an updated driver - faster PWM, either off-time memory or no memory, and either no strobe or a really well hidden one (four taps). Good 1.5v boost drivers and easy-to-mod AA lights are hard to find.

My driver manufacturer has began to research the Narsil

[Simon_Mao]

@mhds

Your idea is very helpful to me, the driver manufacturer is making a drive sample for the XHP35 that fits the L6 host.

Hopefully this will be XHP35 HI

Yes, i mean XHP35 HI

[Simon_Mao]

@HONDARIDER

Simon,
Do you make a camo green L2? Gearbest is selling one and I ordered it. When I got it today it was the desert sand. I have contacted them with the discrepancy and hopefully will hear from them soon. Just curious if the camo green really exist.

i only have black/desert tan/silver L2

[Yokiamy]

@Simon Mao

My driver manufacturer has began to research the Narsil

Simon, that is the best news you have given us lately !

[d_t_a]

@Simon Mao

@skinny_tie

@bigm

An xhp35 L6 with full function side switch and anduril would be amazing! Please use some kind of ramping e switch action if possible. Also, don’t overlook the low-lumen modes.

I’m not sure how realistic it is, but driver updates based on BLF firmware would be fantastic.

Andruil (or Narsil) on side switch lights would be amazing.

Although I love the 8x7135 Biscotti driver, something like a Moonlight Special style 1x7135 + 7x7135 would be great for a lower moonlight mode in the S series, and a TA style FET+n+1 would be nice in the M and BD series. Obviously these drivers are already available elsewhere but it would be great be able to order a Convey with them already installed.

Getting well off-topic from the L2 and L6, I’d really love to see a T2 with an updated driver - faster PWM, either off-time memory or no memory, and either no strobe or a really well hidden one (four taps). Good 1.5v boost drivers and easy-to-mod AA lights are hard to find.

My driver manufacturer has began to research the Narsil

I think it would be good to research both NarsilM and Anduril firmwares…

[Nicolicous]

[Plotthound]

@HONDARIDER

Simon,
Do you make a camo green L2? Gearbest is selling one and I ordered it. When I got it today it was the desert sand. I have contacted them with the discrepancy and hopefully will hear from them soon. Just curious if the camo green really exist.

I bought a Pastel Blue S2+ on Gearbest a while ago out of curiosity. It was really the same grey I already have several of. No complaints as it was only $9.99 and I like the grey. Seems like a trick though. Maybe same seller.

[Simon_Mao]

@d_t_a

@Simon Mao

@skinny_tie

@bigm

An xhp35 L6 with full function side switch and anduril would be amazing! Please use some kind of ramping e switch action if possible. Also, don’t overlook the low-lumen modes.

I’m not sure how realistic it is, but driver updates based on BLF firmware would be fantastic.

Andruil (or Narsil) on side switch lights would be amazing.

Although I love the 8x7135 Biscotti driver, something like a Moonlight Special style 1x7135 + 7x7135 would be great for a lower moonlight mode in the S series, and a TA style FET+n+1 would be nice in the M and BD series. Obviously these drivers are already available elsewhere but it would be great be able to order a Convey with them already installed.

Getting well off-topic from the L2 and L6, I’d really love to see a T2 with an updated driver - faster PWM, either off-time memory or no memory, and either no strobe or a really well hidden one (four taps). Good 1.5v boost drivers and easy-to-mod AA lights are hard to find.

My driver manufacturer has began to research the Narsil

I think it would be good to research both NarsilM and Anduril firmwares…

could you share the thread link regarding Anduril with me ?

[Simon_Mao]

@Plotthound

@HONDARIDER

Simon,
Do you make a camo green L2? Gearbest is selling one and I ordered it. When I got it today it was the desert sand. I have contacted them with the discrepancy and hopefully will hear from them soon. Just curious if the camo green really exist.

I bought a Pastel Blue S2+ on Gearbest a while ago out of curiosity. It was really the same grey I already have several of. No complaints as it was only $9.99 and I like the grey. Seems like a trick though. Maybe same seller.

I am very sorry about the color deviation in the oxidation plant.

[Calaveras]

@Simon Mao

@Plotthound

@HONDARIDER

Simon,
Do you make a camo green L2? Gearbest is selling one and I ordered it. When I got it today it was the desert sand. I have contacted them with the discrepancy and hopefully will hear from them soon. Just curious if the camo green really exist.

I bought a Pastel Blue S2+ on Gearbest a while ago out of curiosity. It was really the same grey I already have several of. No complaints as it was only $9.99 and I like the grey. Seems like a trick though. Maybe same seller.

I am very sorry about the color deviation in the oxidation plant.

There is no deviation in the oxidation. Different sellers are using different words for the same color. some call it blue, most call it gray.
when I look at it I see more blue than gray. I prefer it to gray.

[ToyKeeper]

@Simon Mao

could you share the thread link regarding Anduril with me ?

I can help you with that. It’s probably best to figure out the details through email or private messages though.

[Simon_Mao]

@ToyKeeper

@Simon Mao

could you share the thread link regarding Anduril with me ?

I can help you with that. It’s probably best to figure out the details through email or private messages though.

wow ,so much thanks for your big help ,Toykeeper,
I want to know the operation of this firmware.
My email is 468924022@qq.com

[Macka17]

Simon. Off subject a little.
I ordered and got a C8+ recently.
Ordered Desert sand. Got a chocolate brown. (dark chocolate)
I did send a note on Paypal page but never got an answer
but I didn’t want to cause a stir
What would it cost me for a head and body in Desert sand Del to Australia.

[Simon_Mao]

@Macka17

Simon. Off subject a little.
I ordered and got a C8+ recently.
Ordered Desert sand. Got a chocolate brown. (dark chocolate)
I did send a note on Paypal page but never got an answer
but I didn’t want to cause a stir
What would it cost me for a head and body in Desert sand Del to Australia.

uh ,can you send photos to my email 468924022@qq.com directly ,friend.
i will tackle this problem

[d_t_a]

@Macka17

Simon. Off subject a little.
I ordered and got a C8+ recently.
Ordered Desert sand. Got a chocolate brown. (dark chocolate)
I did send a note on Paypal page but never got an answer
but I didn’t want to cause a stir
What would it cost me for a head and body in Desert sand Del to Australia.

This is sort of off-topic for this message about the L2… But body anodizing color inconsistency might also affect the other flashlights…

Do you mean something like this? (on each set of photos below, the left C8+ is darker brown)

[skinny_tie]

@ToyKeeper

@Simon Mao

could you share the thread link regarding Anduril with me ?

I can help you with that. It’s probably best to figure out the details through email or private messages though.

This post makes me very happy.