And I thought you were kidding about 5 posts… . .
.
……ID…… Author…. Post
1448524 weklund Two please.
1196882 weklund I need one of these beauties … sign me up.
1173618 weklund Please put me down for 2 … Many Thanks.
1162984 weklund Please put me down for 2 of these beauties … Many Thanks.
1156973 weklund Two for me please.
Oh nice. He can do spectrum analysis and give exact colors at different brightness levels, etc… I hope he gets an xpl-hi version because that’s the one I’m curious about.
Just got the light out of its box about an hour ago. Nothing alarming stands out from a quick test. Only preliminary numbers follow.
-This is the cool white XP-L HI version with frosted optics (2.8 cd/lm)
-Beam is very even in tint which isn’t surprising with the floody optics
-Measurements show a bit of green on lower modes, but nothing to worry about, visually it’s clean cool white and much better than most CRI90 219C
-Max output 2800 lumens with a 30Q (haven’t calibrated the temp sensor yet, steps down after about 15 seconds)
-Max throw 7800cd or 177m
-I like the 1+6+FET (edit: it’s 1+7+FET) three channel driver
-Default mode on smooth ramp is 1x7135 at 120 lumens.
-I would like to have the 1x7135 mode part of the default stepped ramp mode, 8x7135 is there as the highest before turbo
-Button top 30Q fits, but is a bit tight, springs are stiff, no damage but my button tops are very short
-Very nice tactile click to the switch. It always works even from the very edge so no precision required.
I'm currently on the list at 950 for one. I've decided I'd like two total, one of each emitter. (I will probably mod the one with emitters I like less!)