FW3A, a TLF/BLF EDC flashlight - SST-20 available, coupon codes public

13665 posts / 0 new
Last post
Scallywag
Scallywag's picture
Offline
Last seen: 11 hours 6 min ago
Joined: 01/11/2018 - 22:23
Posts: 1942
Location: Ohio, United States

I'm currently on the list at 950 for one. I've decided I'd like two total, one of each emitter. (I will probably mod the one with emitters I like less!) 

DB Custom
DB Custom's picture
Offline
Last seen: 2 weeks 18 hours ago
Joined: 01/13/2013 - 22:28
Posts: 20718
Location: Heart of Texas

Nice Quick work Maukka, well done!

Nice looking light, no doubt about it…

raccoon city
raccoon city's picture
Offline
Last seen: 4 hours 39 min ago
Joined: 10/06/2010 - 02:35
Posts: 16001
Location: रॅकून सिटी Palm Desert CA USA

:BEER: 

joechina
Offline
Last seen: 3 weeks 2 days ago
Joined: 03/05/2016 - 08:23
Posts: 1459
Location: Germany
teacher wrote:
dealgrabber2002 wrote:
I wish there was an option for a pure white version. Not too fond of warm or neutral tint.
As far as I am concerned.. Neutral ‘should’ be “Pure White”, as close as possible; without adding warm or cool tints.

What about wait 10 minutes til your eyes do the automatic white balance thing? Wink

mortuus
mortuus's picture
Offline
Last seen: 4 hours 44 min ago
Joined: 12/16/2014 - 09:33
Posts: 3035
Location: Sweden

wow great info, looks like this will be a very nice light for very little money.

...where Frugal meets with Flashlight!

              つ ◕_◕ ༽つ

Henk4U2
Henk4U2's picture
Online
Last seen: 10 min 44 sec ago
Joined: 02/13/2014 - 17:52
Posts: 3980
Location: The heart of the Netherlands (GMT+1)
mortuus wrote:
wow great info, looks like this will be a very nice light for very little money.

Hm, to me this is not very Lidl money.

I would rather call it: ……………. a relatively modest amount of money.

You are a flashaholic if you are forced to come out of the closet, to make room for more flashlights.

dealgrabber2002
Offline
Last seen: 22 hours 33 min ago
Joined: 06/20/2014 - 23:51
Posts: 762
Location: California

[/quote]As far as I am concerned.. Neutral ‘should’ be “Pure White”, as close as possible; without adding warm or cool tints.[/quote]

My definition of pure white would be like a white piece of paper but I know the definition may vary.

CRX
CRX's picture
Offline
Last seen: 1 month 2 weeks ago
Joined: 04/02/2013 - 15:27
Posts: 4231
Location: Scotland

Great pics, cogs turning Wink Thumbs Up

maukka
maukka's picture
Offline
Last seen: 2 months 3 weeks ago
Joined: 12/31/2015 - 04:15
Posts: 2175
Location: Finland

No snapped optic legs here…

BlueSwordM
BlueSwordM's picture
Offline
Last seen: 1 week 6 days ago
Joined: 11/29/2017 - 12:34
Posts: 5574
Location: Canada

So, did Lumintop tell you when the light will be revealed/be able to buy?

I’ll be buying one the second it goes online.

My very own high current Beryllium Copper springs Gen 3:
http://budgetlightforum.com/node/67401
Liitokala Aliexpress Stores Battery Fraud: http://budgetlightforum.com/node/60547

BlueSwordM
BlueSwordM's picture
Offline
Last seen: 1 week 6 days ago
Joined: 11/29/2017 - 12:34
Posts: 5574
Location: Canada

Also, could you check with a magnet if they are steel springs or not?

They look exactly like the BeCu spring from the GT Mini.

My very own high current Beryllium Copper springs Gen 3:
http://budgetlightforum.com/node/67401
Liitokala Aliexpress Stores Battery Fraud: http://budgetlightforum.com/node/60547

Umpi2000
Offline
Last seen: 1 day 13 sec ago
Joined: 03/15/2017 - 08:06
Posts: 398
Location: Durban, South Africa
Party
hcanning
Offline
Last seen: 4 weeks 1 day ago
Joined: 07/06/2018 - 03:05
Posts: 166
Location: United Kingdom

What a lovely looking little light. Can’t wait to get mine.

When I put my name down for one, I didn’t choose the emitter. Do I need to say what I want now, or do I get given the choice once the group buy activates?

Notable lights: Q8 with 4 x 3V XHP50.2, bypassed springs, brass driver and tailcap screws, Anduril firmware, removed anodisation, AR glass, warm white switch LEDs (16,800lm)  |  Convoy S2+ with triple Luxeon V 4000k, Led4Power B4 Driver, Carclo 10507, bypassed springs (2900lm)  |   D18 in sand  |  D4V2 in sand  |  D4S in grey  |   FW3A with warm white XP-L HI  |   KR4 Mule in blue

teacher
teacher's picture
Offline
Last seen: 1 year 10 months ago
Joined: 02/23/2016 - 19:04
Posts: 9596
Location: NE & SW Alabama

Wow…. very nice!! Smile

Thank you for the detailed report & great pictures maukka. . Thumbs Up

You never know how a horse will pull until you hook him up to a heavy load./"Bear" Bryant 

 .................................. "Slow is Smooth, Smooth is Fast" ...................................

       Texas Lumens Flashlights / M4D M4X Deals : sign up - save $$$$  

         Rudeness Level _ mΩ _ {width:70%} _ LightWiki _ LED Tint Chart  

      Xlamp size chart _ BatteryU _ Flashaholic? Need Professional Help???            TheOriginal _ TAB _ LightSearch _ BatterySearch _ 14500's _ DiCal 

 

                                             

hodor
hodor's picture
Offline
Last seen: 16 hours 43 min ago
Joined: 07/11/2018 - 03:58
Posts: 1057
Location: UK

Very nice! Noob question: what does the “1” in “1+6+FET” represent?

BlueSwordM
BlueSwordM's picture
Offline
Last seen: 1 week 6 days ago
Joined: 11/29/2017 - 12:34
Posts: 5574
Location: Canada

1×7135+6×7135+FET driver.

It’s a triple channel driver.

You can get very low moonlights with 1×7135 mode.

You can get an efficient 1000 lumen with 6×7135.

You can get max power with direct drive over the FET with 3000+ lumens of output.

My very own high current Beryllium Copper springs Gen 3:
http://budgetlightforum.com/node/67401
Liitokala Aliexpress Stores Battery Fraud: http://budgetlightforum.com/node/60547

hodor
hodor's picture
Offline
Last seen: 16 hours 43 min ago
Joined: 07/11/2018 - 03:58
Posts: 1057
Location: UK

Ah gotcha, thanks! Beer

sleasys14
Offline
Last seen: 2 days 16 hours ago
Joined: 05/11/2018 - 16:23
Posts: 60
Location: charleston wv

I am on the list for 1. Can you update that to 3 with the LH351D.

maukka
maukka's picture
Offline
Last seen: 2 months 3 weeks ago
Joined: 12/31/2015 - 04:15
Posts: 2175
Location: Finland

TK corrected me and said it’s actually 1+7+FET. Two chips on the other side.

cdjaney
cdjaney's picture
Offline
Last seen: 7 months 4 days ago
Joined: 03/09/2016 - 14:27
Posts: 412
Location: Deep South, Alabama

2 Questions for anyone able and willing:
1. Please forgive if this an ignorant question…..but as far as “modes” or “brightness levels”, does this go up to the 800 lumen range Maukka noticed and then it’s only the full on TURBO after that? Or is there ramping from the regulated 7×7135 mode up to the Turbo (ie. can we go up to say, 1400 lumens-ish or 2000 lumens-ish and stop there, without going all the way to turbo?) ?

In reading on Anduril on the OP page…it appears infinite variable brightness….but just wanted to make sure I wasn’t misunderstanding.

2. The optics. It appears there are several easy swapouts (some mentioned to be sold by MTN on a previous page here). Is it as easy as screwing off the bezel and swapping? Or is there glue or other tools involved?

TIA! Thumbs Up Smile

John 1:5 "The Light shines in the darkness, and the darkness did not comprehend it."

maukka
maukka's picture
Offline
Last seen: 2 months 3 weeks ago
Joined: 12/31/2015 - 04:15
Posts: 2175
Location: Finland

1. All of that is configurable. It’s just that the default stepped ramp mode goes up to the 800 lumens and to turbo from there with a double click.

2. Easy to swap MCPCB and LEDs or optics (Carclo), no glue.

ActiveAl
ActiveAl's picture
Offline
Last seen: 1 month 3 weeks ago
Joined: 03/27/2018 - 03:14
Posts: 575
Location: Central Florida

maukka wrote:
-Max throw 7800cd or 177m

Maukka, thanks for the analysis, and the good hard work you have contributed to this project!

I plan to purchase this version of the FW3A, but would like increase the throw. I get about 12000 cd from my current EDC Thorfire TG06S and would like to at least duplicate it with my new FW3A.

Approximately how much throw would be gained by going to a clear lens? Are there any other easy mods that would further increase the throw? Thanks!

Ryzbor
Ryzbor's picture
Offline
Last seen: 1 week 2 days ago
Joined: 01/21/2018 - 10:52
Posts: 374
Location: Poland

Shouldn’t turbo be closer to 3000lm though?
The lowest mode is approximately how low?
I hope the muggle mode goes up to the 7*7135 level.
Is the build quality of the D4 better?

virence.com Nichia E21A sw30+sw40 Wizard Pro ; Skilhunt H03 XP-E2 660nm ; Wizard Pro E21A 2000K ; S2+ E21A sw40 d220 ; Sofrin C01R 660nm, Mf01 Mini Nichia 219B sw35+sw40

osb40000
Offline
Last seen: 3 months 2 weeks ago
Joined: 03/30/2016 - 14:35
Posts: 80
Location: United States

I’m down for one.

Bevo
Bevo's picture
Offline
Last seen: 2 months 5 days ago
Joined: 03/24/2017 - 01:50
Posts: 13
Location: Cypress, TX

Please count me in for one of each:

  • 1 XP-L HI
  • 1 LH351D
maukka
maukka's picture
Offline
Last seen: 2 months 3 weeks ago
Joined: 12/31/2015 - 04:15
Posts: 2175
Location: Finland

I haven’t tested different optics with the XP-L HI yet, but will post numbers later with the 10507. You’ll probably gain about 20-40% more candela.

Cobra502
Offline
Last seen: 3 months 5 days ago
Joined: 03/13/2017 - 10:59
Posts: 25
Location: Chicago
ActiveAl wrote:

maukka wrote:
-Max throw 7800cd or 177m

Maukka, thanks for the analysis, and the good hard work you have contributed to this project!


I plan to purchase this version of the FW3A, but would like increase the throw. I get about 12000 cd from my current EDC Thorfire TG06S and would like to at least duplicate it with my new FW3A.


Approximately how much throw would be gained by going to a clear lens? Are there any other easy mods that would further increase the throw? Thanks!

With the narrow clear optic and the xpl-hi you should be able to hit 12,000 lux. Using SkyLumen specs his lights achieve 15,000 lux.

https://skylumen.com/collections/v54-lights/products/sl2

Tixx
Offline
Last seen: 4 months 2 days ago
Joined: 08/27/2015 - 22:34
Posts: 309
Location: United States

DB Custom wrote:
I prefer an “A” or “D” as far as the black body Locus is concerned. Below or ideally, at, the line. But we seldom get our choice in these matters.

So I agree with Tom in the choice of a D, not in the choice of a 5. 2A or 3A would be my preference most of the time. I prefer white, no tint. No green or blue or purple or pink or orange or rose or brown, just white.

My Avatar is in color, by the way. 17 emitters, in moon mode. White. Or very close to it.

Same here, A and D. Didn’t realize that was a color pic. Very nice!

borealis
Offline
Last seen: 6 months 3 weeks ago
Joined: 01/24/2017 - 12:17
Posts: 40

Please add me for another

Camo5
Camo5's picture
Offline
Last seen: 3 months 2 weeks ago
Joined: 07/03/2015 - 21:27
Posts: 30
Location: Eldridge IA, United States

It looks as though there might be enough shelf space up front to fit a 4x mtnmcpcb, is this true?

Would love a beamshot of the xpl-hi-3D :3

Though I may end up trying to mod the sst-20 dogf4rts into it for even more throw…cant wait!

Pages