What did you mod today?

CRX · February 1, 2019, 7:54pm

Thought about that method before and did a little experimentation but gave up when I couldn’t find suitable switches easily.

Sirius9 · February 1, 2019, 8:17pm

I was looking at something like this 12V toutch switch for led strip, maybe it could be moded for 4,2V application?

Firelight2 · February 1, 2019, 8:27pm

You got your 18650S working with an Attiny? Will it run Anduril?

Cereal_killer · February 1, 2019, 9:04pm

Baby steps.

The t85 is a different beast than the 13a… The end goal is a direct replacement FET+1 running anduril!

Firelight2 · February 1, 2019, 9:11pm

Yes please!

It would be AWESOME to have Anduril in a tailcap mounted driver that doesn’t need an extra electrical connection to the head. With such a driver, it wouldn’t be hard to mod any tailcap clicky light into an e-switch light with Anduril.

when are you going to sell these Anduril tailcap drivers? I’ll take 10!

contactcr · February 2, 2019, 5:32am

Reminds me of the game Operation.

For this one you will truly need to be a surgeon:

https://www.illumn.com/pre-order-folomov-edc-c1-brass-nichia-e21a-95-cri-335-lumen-flashlight-10440-battery-w-micro-usb-charge-port-included.html

Tamagotchi · February 4, 2019, 10:11am

Project “Aphrodite”.

This flashlight is product of teamwork Tamagotchi and k_4.

Length: 97.75 mm
Head width: 23.6 mm
Handle width: 21 mm
Weight: 49 grams

Carclo 10507, 3x XP-L Hi V2 3A, serial connection.
Driver Caerus II output 2.2A
18650 battery

djozz · February 4, 2019, 2:04pm

Very nice! Love the way the texture on the battery tube is done

(nails were very nicely done too :party: )

k_4 · February 4, 2019, 1:31pm

Thanks for your comments .

Tom_E · February 4, 2019, 2:05pm

It looks fantastic! 2.2 amps keeps it somewhat tame with the heat. What material is that? Looks to be an SS bezel, but the rest I'm not sure of. Probably laum or titanium because of the light weight?

k_4 · February 4, 2019, 2:47pm

Hi Tom , it’s all aluminium, 2024 in classification on Europe and USA. Just it is polished … 22 Watts is turbo mode and it’s not long, because PI regulator control the overheat, it just about 30 sec , then power is slowly down and stabilizated on the thermal balanse.
P.s. sorry for my bad English

CRX · February 4, 2019, 3:40pm

Cool

k_4 · February 4, 2019, 3:44pm

Thanks

chadvone · February 4, 2019, 6:16pm

Wow. That is some great work. Good Job Tamagotchi and K_4

Firelight2 · February 4, 2019, 6:19pm

Agreed. Awesome job!!!

Where do I place my order for the group-buy?

staticx57 · February 4, 2019, 6:58pm

That is one sharp looking light

MRsDNF · February 4, 2019, 7:29pm

Firelight2 · February 4, 2019, 8:56pm

Trying to make a lighted switch for my D4.

I bought a ton of tiny colored 0603 LEDs from Amazon ($14 for 360 in various colors).

… but now I need resistors for them.

QUESTION: What resistors should I buy? … preferably a link to suitable resistors from Amazon.

Thanks!

ZozzV6 · February 5, 2019, 2:51am

I need to know more of this

Today I dedomed an XHP70.2 again that will fit in a resistor modded Thorfire S70S with an L6 SMO reflector.

contactcr · February 5, 2019, 3:06am

So when are you selling these LEDs?