BlueSwordM
(BlueSwordM)
February 6, 2019, 6:46pm
322
Rusty
(Rusty)
February 6, 2019, 6:59pm
323
BlueSwordM: Please could you add 10no SST-20 4k & 10no LH351D 4k, in addition to the springs on line 19 of the s/sheet?
BlueSwordM
(BlueSwordM)
February 6, 2019, 7:01pm
324
Tom_E
(Tom E)
February 6, 2019, 7:03pm
325
Hhhmm. Guess the 100x100 size would be good enough to do least a few 17 mm drivers at a time, and can handle the biggest drivers or MCPCB's. The shipping cost is big though. I like they can go up to 200C, better than 212F (100C) max of the burners.
Unloco
(Unloco)
February 7, 2019, 12:06am
326
Tom_E
(Tom E)
February 7, 2019, 12:48am
327
Good price w/shipping, not much info on it - do you know the max temp? Hoping for 200C or better.
Found other listings that say 50-350 or 50-400 -- that's good, assuming in C!
Unloco
(Unloco)
February 7, 2019, 4:59pm
328
I have used it at around 200-220C but I think the max temp is 400C.
In a few hours, when I return to my home I check it.
djozz
(djozz)
February 7, 2019, 5:17pm
329
So how do you like that hotplate? It looks very small and convenient, I almost bought one. What time does it take to reach the set temperature?
AEDe
(AEDe)
February 7, 2019, 6:53pm
330
@BlueSwordM , could you please reduce my query to 10 * SST20 4000/3000 (springs and 3500 K are without change)?
Unloco
(Unloco)
February 7, 2019, 7:57pm
331
Confirmed. Maximum 400C.
I like very much. Since I have it, I have not failed any led reflow.
Room temperature 27C (air conditioned).
Hotplate initial temperature 33C.
Delay until reaching the set temperature (218C) 10:44 minutes.
shirnask
(shirnask)
February 7, 2019, 8:07pm
332
Unloco:
Confirmed. Maximum 400C.
I like very much. Since I have it, I have not failed any led reflow.
Room temperature 27C (air conditioned).
Hotplate initial temperature 33C.
Delay until reaching the set temperature (218C) 10:44 minutes.
Thanks, I have been thinking about this unit for several months, you just convinced me - ordered
Tom_E
(Tom E)
February 7, 2019, 8:17pm
333
It's the best price as well on Ali. Others may list it cheaper but charge almost as much for shipping.
BlueSwordM
(BlueSwordM)
February 8, 2019, 2:01am
335
BTW guys, I’m going to order the 3000k LEDs at the same time as the springs.
Who would like additional 3000k LEDs?
If I could actually order 250 LEDs, I could actually make them a bit cheaper than 1,50$USD/pcs.
I’m also still looking at the SST-20 4000k.
netprince
(netprince)
February 8, 2019, 2:47am
336
Sure, I’ll take 8 of the 3000k if its not too late… I haven’t signed up for any of them yet I dont think…
BlueSwordM
(BlueSwordM)
February 8, 2019, 2:49am
337
MikeMacD
(MikeMacD)
February 8, 2019, 7:02am
338
BlueSwordM, add 20 of the SST-20 3000k to my order (line 47) if that helps.
AEDe
(AEDe)
February 8, 2019, 1:19pm
339
What is the current price of 3000K with fee ? Is it cheaper than at intloutdoor?
BlueSwordM
(BlueSwordM)
February 8, 2019, 2:01pm
340
Currently?
If you order with the springs, yes.
Otherwise, since you pay for shipping, it’s not really worth it if you buy a small quantity of LEDs.
So, in your case, since you have some springs, then yes, it will cheaper, even with the fee, compared to Intl Outdoor.
AEDe
(AEDe)
February 8, 2019, 3:45pm
341
Thanks. So 3500K 3000K can be shipped with springs.and 4000k will be later.
Then I am in for 20pcs 3500K and 20pcs 3000. and no 4000K if possible.