Check in every 3 weeks. That way you can read 150 posts about something entirely unrelated, because somewhere in there IS a post that has relevant info…
This can be your Sunday afternoon Sudoku puzzle
Only 150 posts in 3 weeks? Lately I check in a few times a day and there are sometimes 50-60 posts in just 8-12 hours since I last checked. Of course, not a single one on topic or even serious in nature.
Not to be a pain, but the Gallium I mentioned isn’t dangerous in and of itself. It’s just got an extremely low melting point as illustrated in the many youtube clips out there. Better think about better heat shedding properties or you’ll have a puddle of molten metal in your hands.
Special Order / Ready for purchase_In your dreams_.
FW3UN = Unoptainium
_ Use within attention to CAUTION listed
FW3Ga = Galluim
_ Caution & Protective Gear Required
Could be & probably Will Be HAZARDOUS to Health & Life!!
..!..USE AT YOUR OWN RISK & PERIL….!.
FW3PL = Plutonium
FW3U R = Uranium - Raw
_
…………….FOR COMPLETELY HOMEMADE LIGHTS ONLY…………….
TRY TO USE ONLY IF YOU HAVE A DEATH WISH, BECAUSE YOU WILL DIE
YES…. DIE!! GRAVE YARD DEAD. YOU WILL MOST LIKELY BE IN TINY BITS.
FW3AA = Azidoazide Azide
_ SciFi Models
FW3Ad = Adamantium
FW3CD = Carbon Dioxide
FW3DI = Dry Ice
FW3Kr = Kryptonite
FW3LN = Liquid Nitro
FW3Mi = Mithril
FW3MF = “Mr. Fusion” (power source)
FW3TAl = Transparent Aluminum
FW3Vi = Vibranium
_ PENDING
FW3XX = ???
Please Note:
1.If your model or suggestion was omitted, my apologies; I simply overlooked it.
2. THE LISTwill be update until the FW3A is announced for sale. After that there will be no further updates. . It will be time at that point to get real serious about reading the “I ordered mine.” or “I ordered 3.” , etc., etc. posts.
………
Please …… Do Not “Quote” this looooong post. . Thank you.
can we please stick to the fw3a talk only ? im close to unsubscribe since talking about other models i dont really see the point when the first light is not out yet. and new buyers will be lost in all off-topic talk when u get mail new posts and its nothing about the current model…
On the one hand, you’re totally right. On the other hand, this happens every year during CNY and it’s kind of unavoidable. That’s almost over though.
Neal is back to work and sending feedback to Lumintop, but I don’t know if they’re around to receive messages yet or do anything about it.
In other news, maukka sent me a nice pic of the FW3A next to a high-end HDS light. It’s the rotary model, I think. The HDS on the left is a 1x16340 light, while the FW3A on the right is a 1x18650 light:
@ Spiderlight… Jason is correct. Just be sure you have email notification for PM’s activated. Then you will get an email notification when you receive a PM. :+1:
I was also hoping this was the case so it would clip on a cap.
Can the clip be modded to fit? What are the o.d. thread measurements of the front and rear?
Are there other clips that might fit?