It's the one thing that has been bugging me since the beginning. I was the first to say the cells don't look like real 40T's and then more posts came from everyone confirming they aren't real. I know it's Chinese New Year but Jack at Fireflies has been completely mute on the fakes he sold us. I agree that he was probably not aware of it himself until I emailed him the first time, but that was way before their new year. All I asked was if they are safe and no response, which means he probably doesn't even know himself. I'd feel a little better if at least the cells could identified to be from a reputable manufacturer. Jack is around as he responds instantly to praise but that's about it.
Anyway, made a decision today to drop both fake 40T's off at the recycle bin and call it a day. Just ordered some real 40T's at the 18650batterystore for peace of mind.
Ok, whew. I did the first swap of the XPL HI 5000k into my grey E07 for my work light. Discovered super fine layer of thermal past on both lights. Be ware of smoothing back flatter with a file. You can remove a lot of copper doing this. I will just use sanding paper on a flat surface on the nichia light. My solder gun tip bumped a aux light wire and melted a hole through the liner, so I had to patch with heat shrink. Omg this was some tedious microscopic work! I ended up breaking out a headlamp and magnifying glass to complete. It all seems well and working The nichia back before beveling edges. I’ll do this later. I stressed out enough for one day, but the work light is ready for duty tomorrow:)
So I got a refund from BG. I am thinking of buying another E07 but want to be sure that the teething problems in the manufacturing process have been resolved and that the remaining old stock has gone. What is the consensus on whether this has happened, and what was the most problem free version? I suspect I should wait at least three more months but wanted to see if anyone with more knowledge than me knows if a better E07 is out there. I know that the bare aluminium version has manufacturing improvements but have also seen problems still being reported.
Hello everyone I know this is not the right place to ask for mods or whatever… im kind of in the new side of buying the E07 and I want to know if i can mod the light just a little… gonna buy a titanium cap that is slightly bigger than the battery cap on the E07 and a flat coin type magnet to have magnet on the tailcap… do ya’ll think it’s a good idea or heck nope
I think you should test your idea first with the magnet you intend to buy and some tape. The E07 is pretty top heavy so you will want a pretty strong magnet.
You could just JB Weld a rare earth magnet to the end of the stock tail cap. I’ve seen it a few times in a Zebralight mod thread. Didn’t look too bad IMO.
Another option is to buy an Emisar D4s for when you want a magnetic tail cap. Great light that’s right up there with my E07.
OK, at this point I would not recommend ordering an E07 from Fireflies or Nealsgadgets.
I ordered a version that was showed to be in stock from Nealsgadgets back on February 3. I paid for the “Express 7-9 day shipping”.
My Paypal account was charged on February 10. On the 12th, I emailed to see if it had been shipped, as I had not received any “shipped” notification (9 days after the order). No response.
It has now been 17 days since I ordered, and 10 days since they’ve charged my card, but no shipping information and no response to the three emails I have sent requesting an update.
Honestly, I don’t mind waiting if the light is out of stock or there are other issues. However, a simple response to the inquiry letting me know would seem to be the most basic of business practices.
Is it time to open a dispute with Paypal?
When I ordered my second E07 from Fireflies with expedited shipping, they never sent me the tracking number. After a couple weeks I sent an email to Fireflies asking why my light hadn’t shipped yet, but the very next day it arrived.
Apparently it had shipped, they just hadn’t sent the number.
I had a similar experience, but Neil did respond several times that he was going to ship but never got a tracking #. I later ordered directly from fireflies and received a tracking number in about a week. After this I emailed Neil again about fireflies already shipping there’s that I ordered way after his and almost immediately received his tracking number. I paid for expedited shipping and it arrived in 3 days. It took a little over a month to get the fireflies light with free shipping. Neil gets his lights from fireflies directly. So that’s the wait part of buying from him. But once he gives you that tracking number you better be ready cause it comes FAST!
Ok, whew. I did the first swap of the XPL HI 5000k into my grey E07 for my work light. Discovered super fine layer of thermal past on both lights. Be ware of smoothing back flatter with a file. You can remove a lot of copper doing this. I will just use sanding paper on a flat surface on the nichia light. My solder gun tip bumped a aux light wire and melted a hole through the liner, so I had to patch with heat shrink. Omg this was some tedious microscopic work! I ended up breaking out a headlamp and magnifying glass to complete. It all seems well and working 
The nichia back before beveling edges. I’ll do this later. I stressed out enough for one day, but the work light is ready for duty tomorrow:)
so its abandoned or what?