ca. 70g
36mm max diameter x 105mm long
reflector: 29mm ID
Hope it will be able to outperform in throw Nitecore MH20GT which is almost identical in dimensions (except max diameter)
Or maybe its just a wishful thinking?
Specifications Emitter: Cree XP-L High Intensity, neutral white or cold white, mounted on copper DTP MCPCB Flux: ~1000 lm Throw: ~400 m & ~50Kcd Firmware: Tom E’s open-source GPL NarsilM v1.3 adapted by Texas_Ace User interface: [1] By default the GT micro is set to use the very intuitive Narsil smooth RAMPING UI. Instant access to a 2.5 A TURBO mode is also provided. [2] A more conventional discrete level MODE-SET UI is available as an alternative. Any one of 12 predefined mode-sets can be selected. [3] MOMENTARY mode is useful for signaling purposes or rapidly/briefly lighting up targets. Battery: One 14500. Cell is not included. Driver: Texas Avenger FET driver Reflector: 29 mm ID, aluminum, smooth finish Lens: Glass with anti-reflective coating Body: Aluminum with Type III hard-coat anodizing Button: Tactile with back-lit rubber boot Ingress rating: Equivalent to IP65, do not immerse in liquids Weight: Approximately 70g without cells Dimensions: 36 mm Ø head x 105mm length
—
all new deals are also posted here: deals.m4dm4x.com if you do not find what you are looking for :
Description says 2.5 amps in Turbo, is this really true?
Need more juice than that.
Hoping this is just cut and paste from BLF GT specs.
Thanks!
—
“History doesn’t repeat itself, but it sometimes rhymes,” Mark Twain
…
After the Apocalypse there will be only 2 things left alive, Cockroaches and Keith Richards
Description says 2.5 amps in Turbo, is this really true?
Need more juice than that.
Hoping this is just cut and paste from BLF GT specs.
Thanks!
This is a direct drive flashlight (I assume it has a simple FET+7135 driver just like the GT mini), and even more so than with 18650 lights, the actual drive current depends on which 14500 you use, and it makes a big difference if it is fully charged or not.
2.5A sounds like a proper current for a 14500 driving a XP-L hi. You can get higher currents with low voltage leds like the SST-20, or the White Flat (which will be my mod).
“History doesn’t repeat itself, but it sometimes rhymes,” Mark Twain
…
After the Apocalypse there will be only 2 things left alive, Cockroaches and Keith Richards
Filled the form. One in NW, please.
Hope it will be able to outperform in throw Nitecore MH20GT which is almost identical in dimensions (except max diameter)
Or maybe its just a wishful thinking?
as soon as I get news I post it
all new deals are also posted here: deals.m4dm4x.com
if you do not find what you are looking for :
ask MARTIN@M4DM4X.COM - i will save you money!
Luke
Still no news on specs?
they are testing the prototype afaik to get those numbers
all new deals are also posted here: deals.m4dm4x.com
if you do not find what you are looking for :
ask MARTIN@M4DM4X.COM - i will save you money!
€dit got the
Specifications
Emitter: Cree XP-L High Intensity, neutral white or cold white, mounted on copper DTP MCPCB
Flux: ~1000 lm
Throw: ~400 m & ~50Kcd
Firmware: Tom E’s open-source GPL NarsilM v1.3 adapted by Texas_Ace
User interface:
[1] By default the GT micro is set to use the very intuitive Narsil smooth RAMPING UI. Instant access to a 2.5 A TURBO mode is also provided.
[2] A more conventional discrete level MODE-SET UI is available as an alternative. Any one of 12 predefined mode-sets can be selected.
[3] MOMENTARY mode is useful for signaling purposes or rapidly/briefly lighting up targets.
Battery: One 14500. Cell is not included.
Driver: Texas Avenger FET driver
Reflector: 29 mm ID, aluminum, smooth finish
Lens: Glass with anti-reflective coating
Body: Aluminum with Type III hard-coat anodizing
Button: Tactile with back-lit rubber boot
Ingress rating: Equivalent to IP65, do not immerse in liquids
Weight: Approximately 70g without cells
Dimensions: 36 mm Ø head x 105mm length
all new deals are also posted here: deals.m4dm4x.com
if you do not find what you are looking for :
ask MARTIN@M4DM4X.COM - i will save you money!
I’m glad they skipped the nimh.
Is there a spring on the driver end? My recently acquired Vapcell 14500’s doesn’t work with some button head drivers.
Thought I signed up for this, but I don’t see it in my subscriptions, so I’m in for 1 NW please
you need to leave your contact email in the sheet to receive the buying information
all new deals are also posted here: deals.m4dm4x.com
if you do not find what you are looking for :
ask MARTIN@M4DM4X.COM - i will save you money!
Filled in for one cw , thx
Any update on this?
nope
silence from Neal
all new deals are also posted here: deals.m4dm4x.com
if you do not find what you are looking for :
ask MARTIN@M4DM4X.COM - i will save you money!
I just got mine..seems sweet so far…OOPS wrong thred..lol..i hope they ship soon
I'm ThatCrazyFlashaholic 67
Hello my dear friend!
Neal has finally listed the Lumintop GT MICRO on his shop (please use this link)
use the code: GTMICRO to get 25% OFF
i made a short introduction video of the smallest member of the GT family too:
and lumintop store has a coupon code: SPR20DIS 20% off for over $10 , end date:April 30th
all new deals are also posted here: deals.m4dm4x.com
if you do not find what you are looking for :
ask MARTIN@M4DM4X.COM - i will save you money!
Ordered, Thanks Martin
Thx nw ordered
ordered 1 nw and 1 cw. Thanks Martin
One cw ordered- thanks Martin
cloggy
Ordered CW.
Cheers Thanks to All Folk’s In This.
Elzetta Bones.
Ordered one NW thank you
Bonum commune communitatis.
Yarp.
Ordered one NW. Thanks as always!
ordered, thanks.
protected or unprotected batteries for this?.
Elzetta Bones.
Description says 2.5 amps in Turbo, is this really true?
Need more juice than that.
Hoping this is just cut and paste from BLF GT specs.
Thanks!
“History doesn’t repeat itself, but it sometimes rhymes,” Mark Twain
…
After the Apocalypse there will be only 2 things left alive, Cockroaches and Keith Richards
This is a direct drive flashlight (I assume it has a simple FET+7135 driver just like the GT mini), and even more so than with 18650 lights, the actual drive current depends on which 14500 you use, and it makes a big difference if it is fully charged or not.
2.5A sounds like a proper current for a 14500 driving a XP-L hi. You can get higher currents with low voltage leds like the SST-20, or the White Flat (which will be my mod).
Btw, ordered one
link to djozz tests
Ordered a NW. Thanks Martin and Neal!
Do you have the tint/bin info on the NW? Love to see the XPL HI V2 5D in there.
Martin and/or Neal….. two questions.
Thank you.
You never know how a horse will pull until you hook him up to a heavy load./"Bear" Bryant
.................................. "Slow is Smooth, Smooth is Fast" ...................................
Texas Lumens Flashlights / M4D M4X Deals : sign up - save $$$$
Rudeness Level _ mΩ _ {width:70%} _ LightWiki _ LED Tint Chart
Xlamp size chart _ BatteryU _ Flashaholic? Need Professional Help??? TheOriginal _ TAB _ LightSearch _ BatterySearch _ 14500's _ DiCal
Ordered! Thank you!
Thanks guys, got mine ordered asap this morning. May have scewed up the discount code but oh well, that’ll learn me to operate my phone BeFoRe coffee!
Lookin forward to it…
When do they ship?
“History doesn’t repeat itself, but it sometimes rhymes,” Mark Twain
…
After the Apocalypse there will be only 2 things left alive, Cockroaches and Keith Richards
Pages