FW3A, a TLF/BLF EDC flashlight - SST-20 available, coupon codes public

You hide behind a login ID, so how is your privacy violated?

Put me down for one please.

I continue to be surprised by the wide range of topics covered in this group buy thread.

I had salad and chicken nuggets for dinner.

Joking apart, I’m really looking forward to this. I think I’m in the LH351B camp myself. I hope it’ll be a thing.
Also, sorry if that has been asked before, but in the finished product, do we have to desolder the wires to the MCPCB to flip the driver over for flashing the controller, or is there some more elegant way that doesn’t involve taking a 380 °C iron dangerously close to the emitters? :smiley:

Yep, pretty cool isn’t it. On a given day…… no telling what will be available for learning. . :wink:

anyone know of other lights in existence that use the LH351D emitter?

http://www.zebralight.com/SC64c-LE-18650-4000K-High-CRI-Flashlight-Limited-Edition_p_239.html

In for 1.

Tom Tom, I view you as the biggest complainer of the forum. Often negative and very vocal about it.
But non-aggressive towards other members. And often constructive.
So…from my point of view your transformation was a success. :+1:

A lot of what he says is quite correct but he comes across at times as so dreary, negative and repetitive it gets tiresome.
I put two and two together a while ago as to who it was when the old bluntness started showing through.
Keep that in check and you will be alright here Tom Tom, the forum is very forgiving.

can we leave tom tom alone now ? it gets us nowhere and is way off-topic for this thread…

Yes, we wouldn’t want to go off topic in this thread :smiley:

Heavens no, that would be tragic. Especially since the thread has stayed so close to topic thus far… :smiley: :smiley:

I had forgot all about TK’s Tom Tom post, I was back focused on the light again. Then Tom brings it up and now it’s topical again. I think he shot hiself in the foot by bringing it up. :person_facepalming:

Now back to the FW3A. :innocent:

OK! So, what mods are you people thinking about when the FW3A arrives? :partying_face:

Not planning on modding. The only exception being a possible LED change in one (1) of mine. The stock XP-L HI’s will remain in the others.

I’ve been thinking on that too, I would like to get some Luxeon V 4000K into it!
Recently, I started thinking about the possibility to add a tritium vial in the tail cap, but that may be dependent on the thickness of the metal (to dig a place for the trit) :beer:

I’m probably going to try and electroplate this light.

I’d love myself a copper plated light, or a silver plated light.

Slicing LH351 for High CRI Samsung HI version.