What Legoes with What?

Sofirn C01 legoes with the Maratac copper AAA :partying_face:

:smiley: :smiley: :smiley:

Would be nice to get the smaller ones to light up :stuck_out_tongue:

Button cells? That would be cool to see.

Hum, would it be possible? :open_mouth:

djoozzzzz, can you try it? :smiley: Just for fun :partying_face:

LOL, no chance, the driver boards are already touching each other.

:weary: Noooo fun then :person_facepalming:

:stuck_out_tongue:

Hmm… Any chance a DQG Hobi or Fairy tube would lego with those? If so, there is a short extension tube available for those from Banggood. It should be long enough to fit two button cells back-to-back with a divider in the middle, to light up both lights. There are actually two versions of the tube, one with a divider already and one that is just an open tube. I have both.

The Convoy S2 vs Convoy S2+ 18650 & 18350 tubes!
As posted on another thread, the Convoy S2 gray (bought from Simon) can be used with the black & desert tan 18650 tubes and the gray, black & desert tan 18350 tubes!

Also, the S2 gray tube can be used in the “short” Convoy S2+ (blueish gray) [no photo of that one, sorry].

lol
Fenix E01 also do not turn on:

these all work

and these

here is 18650 Eye15 and 18350 Eye10

The Skilhunt DS20 legoes with the (shorty) battery tube of the BLF-A6. The o-rings do not engage at all so the combination is not waterproof, but it works fine on a 18350.

Sofirn SF32(UV) legoes with Convoy S2+

BLF A6 legoes with Astroloux S41S

Sofirn C8T legoes with Convoy C8+

Jetbeam/Niteye RRT-01 to Jetbeam/Niteye TCR-1

Fire Flies E01 and E 07 are the same except for the head. All parts interchange, same tube same tailcap.

V10r Ti w AA extender from V11r



The Nitecore P12 tailcap fits perfectly onto the Nitecore P30. It makes it easier to use a lanyard without having to use the tactical ring on the P30, and it will tail stand. Tail standing is not perfect because the rubber boot on the P12 switch is a bit taller then the cap. However, It does work as you can see in the pic.

Would know if the New copper S2+ can Lego with others

Nope...completely different threads than any other S2

yes but myabe others brand with square threads can fit,would know wich

Am I the only one who found out that a euro coin can become pretty stuck inside a D4 bezel? :person_facepalming:

It just so happens that I'm on the bus on my way home and I also happen to carry my D4V2 and 90% sure that I should have some change in my wallet. Now.. let's see if no one is looking my way and..

Nope, just joking.. But, all of a sudden just realised.. my trip home seems to have gotten that much longer for whatever reason, I wonder why that could be, hmm..