FW3A, a TLF/BLF EDC flashlight - SST-20 available, coupon codes public

OK, thanks for clearing that up guys. :+1:
I understand now…… “It is not fit”. :wink: It appears in that picture anyway.
…….
’Hopefully’…. it is not as bad as it ’appears’ in that particular picture. :innocent:

Hopefully.

:slight_smile:

Seriously?? … :person_facepalming: … What a silly post. :frowning:

Wow… isn’t that the truth cabfrank. :slight_smile: … We are getting a lot of use out of the word “hopefully” the last couple of days. :smiley::wink:

hope·ful·ly

  • 1. in a hopeful manner

hope·ful

  • 1. feeling or inspiring optimism about a future event:

The price will be the last nail.

Don’t tell LT, but I’ll still buy at least one of these lights as long as they stay <$50.

Obviously $36 would be ideal, but who knows if they even know that was an expectation at this point.

You just told them. :wink:

If this light ends up at the same price as the D4 - let alone more expensive - I will have zero interest.

Come on ‘guys’, let’s not be so……
pes·si·mis·tic

  • 1. tending to see the worst aspect of things or believe that the worst will happen

Let’s try to be….
op·ti·mis·tic

  • 1. hopeful and confident about the future

instead. :wink:

……….

Don’t worry, be happy…… :beer:

Please don’t tell me what to be, it’s hard enough to be who I am as it is… With all the comercials, politicians, religious people telling me what and who to be.

Just a suggestion, you of course; are free to take it or leave it. :beer:

You can get a D4 for $35 right now though…

I am just bored with side switches at this point. I’m personally willing to spend a little more for something different.

All this is just idle speculation until we hear from Lumintop or Neal or TK or whoever on the price. Heck, maybe the Easter Bunny knows.

That’s my point exactly. The price has to be competitive with the D4 when compared against the same emitter options, especially since this has one less and the X-PL HIs are a significant portion of the cost of a D4 with them.

+1 . :+1: … Well said.

How did a different price even enter into this wonderful discussion about clip color & hole in clip??

I don’t expose myself to commercials, politicians or religious people. I feel so much better! :sunglasses:

There are literally advertisements all over this site lol

Evidence so far is they don’t pay much direct attention to this thread.

Something that was said recently by someone on TLF who is in contact with Lumintop gave me the impression they did at one point in the past look at this thread, but suffered a debilitating eye-roll injury as a result. :wink:

Personally, I still don’t care about the color of the clip, as long as it is not something that is going to rust if whatever the coating is wears off, but the apparent protrusion of the clip ring from the body should be obvious as undesirable.

If that is final, I will still buy it, but be a bit disappointed at the need to sand down the outer diameter.

You’re probably right that they haven’t paid much attention to this thread. It gets hard sometimes for even BLF members to follow it everyday.
Hopefully, there are no glaring issues, or dealbreakers with the samples. Hopefully, the clip fit, and it all fit. Hopefully, production and sales will start soon. Hopefully.

With that priceless comment iamlucky13, you win the internet today as far as I am concerned. :beer: . :+1:

I love it!! :wink:

“I hope I can make it across the border. I hope to see my friend and shake his hand. I hope the Pacific is as blue as it has been in my dreams. I hope.”