SO easy too
5 min
wle
SO easy too
5 min
wle
Ok, another revision…
Sorry about being overly critical. I’m picky about more things than I should be.
those are fun, glow tape is CHEAP and fast.
wle
CRX:Ok, another revision…
Sorry about being overly critical. I’m picky about more things than I should be.
No that was great, always good to have someone else’s input, especially the creator of the thing.
I do these for myself and maybe help everybody who’s interested in some way too :+1:
those are fun, glow tape is CHEAP and fast.
wle
True.
I added a strip of the glow tape to the clip groove too.
CRX:Ok, another revision…
Sorry about being overly critical. I’m picky about more things than I should be.
Maybe… you just can’t help it. . :innocent:
teacher:@ wle
Is that a Glow Gasket thing from Neal??
What color?
it is just basic green glow in the dark tape from aliexpress
you can get 1/2 x about 20 feet for about $3i cut the ribbon and stuck it inside the head
green is the brightest GITD color
it isn;t as blue as my pic shows, that is white balance from the camera being fooled i assumewle
Cool! Thanks for the tip. Going to try that too.
@CRX — nice move on the thin GITD for the clip groove. I’m pretty happy with the top one. Also have a thin one on the body, but might take it off (looks a little busy).
I thought there would be enough space for the tape to go under the tailcap by about 3mm or so but the tape I have is just a little too thick, thinner tapes might do this.
Be nice to ToyKeeper!
She does shower pics!
Maybe… you just can’t help it. . :innocent:
teacher:Maybe… you just can’t help it. . :innocent:
… Hey, it is what it is… many women are much more detailed than many men. No need to be sorry for that.
正在使用发音
In our country, call him a hooligan rabbit
Luxeon V2’s in 5000k, my favorite emitter behind TIR optics.
I also found very poor thermal compound application on mine so I lightly sanded the bottom of the mcpcb and replaced the white crap with AS5.
Luxeon V2’s in 5000k, my favorite emitter behind TIR optics.
I also found very poor thermal compound application on mine so I lightly sanded the bottom of the mcpcb and replaced the white crap with AS5.
How’s the beam compared to XP-L HI?
Just saw it in FB group
Just saw it in FB group
I just ordered a stick of Titanium off Flea-Bay to do the same thing… :+1:
TK:I haven’t tried a SST-20 FA3 yet though. I might like that one.
I think that you do not like it because it is still a very clean white with nothing rosy in it. It is not green by itself but looks “green” next to the high CRI 4000K 219B, and even next to a (70CRI) 4000K Luxeon V.
Did you measure the tint on the Luxeon V. Sounds like this will look similar to 5A or 5D tint. How does output compare to xpl?
[How’s the beam compared to XP-L HI?
Slightly wider with a perfect white tint.
I don’t dislike the 3D HI’s, just that the Luxeon V2’s are my favorite led so I wanted to put some in my favorite light!
KevinZA1988:[How’s the beam compared to XP-L HI?
Slightly wider with a perfect white tint.
I don’t dislike the 3D HI’s, just that the Luxeon V2’s are my favorite led so I wanted to put some in my favorite light!
Nice…
I really like the V2’s as well.
Do you have any estimates on lumens and max Amps?