Imalent MS18 with 100,000Lumen and R90TS with 36,000Lumen

200,000 lumen? Typo?

Hello my dear friends!

Today i present you worlds BRIGHTEST production flashlight - the IMALENT MS18 with 100 000 Lumens and his twin brother R90TS with 36 000 Lumen (but 1700m+ throw)
After a hands on i compare them outside with the Imalent MS12 (53000 Lm), the R90C (20000 Lm) and the Acebeam X70 (60000 Lm)

I wanted to give you a lot of impressions - so the video is long, especially in the beamshots i tried to give you some different ways to see the lights.

i try to add subtitles to the beamshot part so you can choose if you want to read which torch is on

If you want to buy one let me know and i try to get you the best deal!

Wow that was quick. Martin you are the man! :beer:

I think walking away from the camera to show the beam really adds to the review. Also bringing the MS12 and X70 were great ideas. Thank you!

i know its tooo long

and the long grass in front of the camera are bad too

but i was trying to be consistent with my other videos and give a useful comparison to other lights at first.

-> the glamour shots will definately follow ;)

btw: do you know this video?
www.youtube.com/embed/8_fRMgAe3AU


Wow. You got two big one in one package… congrats.

I meant adds to the depth of the review, not in a bad way. I don’t think it was too long, it covered a lot, thank you!

:beer:

would be very helpful if you subscribe to the channel ;)

So, the MS18 is using a FET driver.

Finally got mine:

Full image gallery

pwm!!!

What is this, the MS18 or the R90ST?
Edit.
I understand that it is the MS18.

Did you buy one and take it apart or are these pics from someone else?

It’s very interesting. I don’t think anyone has posted pics of the older MS12 internals so to see the newer MS18 is nice.

Martin, great review video comparing all the big boys.

To those who have received these lights,
Is user able to open the fan frame and replace the fan? And is the fan really effective in blowing out hot air?

No, they put glue on the screws..

the fans do a good job to move the air imho

its soft, black silicone

but the fan frame stays in position

Ok, I thought it was glue!

Are you sure it's black silicone?
I thought it was just transparent?

yes

similar to the stuff i used to detect if anyone opened my anesthesia or Xray units so i was able to deny warranty

Ok, that could be it as well. Just assumed it was glue :)