In addition to these questions, what version of AndĆŗril is the copper version running? Iāve got one in my basket but Iād like to know if I also need to get one of those clips for flashing drivers with.
Nichia has the best CRI, but how does it compare in heat, lumens and throw, vs Cree and SST? Iām assuming the hottest with the least lumens and throw?
I still canāt decide which version to buy (after the 3D of course), between these and the 1A or 7A.
I still havenāt seen the 219C and SST-20 used in this light, so Iām not sure what they look like in person.
However, the SST-20 should be more throwy, while the 219C is more floody. It looked like the original 219C batch also had a very nice rosy tint, so I hope the future batches will too. In theory, I think I would like SST-20 more because it does not need as much power to illuminate to the same hotspot intensityā¦ but I would really have to see it in person to be able to decide.
Mostly Iām using a lightly modded one instead, with 219B. Itās really hard to beat.
Thanks TK and Jason. I forgot that the Nichia was in the original comparison. I guess I just have to decide whether I want WW or CW.
I already do love this light in NW.
Has anyone figured out how to make the clip work better? It keeps slipping off my pocket. I tried the clip from my Convoy S2+ around the groove at the top, which at least makes it deep carry, but it also grabs pretty loosely. I think the problem is due to the taper.
Sorry if this is an ignorant question, but if I squeeze the bend in the clip tighter (so that it grabs harder), do I risk breaking it? Iād really like to order another but only if I can make them stay clipped on.