E21A 2700K, 2000K back in stock.

2868 posts / 0 new
Last post
varbos
Offline
Last seen: 13 hours 56 min ago
Joined: 02/16/2017 - 07:36
Posts: 573
Location: Europe

Has it got reverse battery protection now ?

MascaratumB
MascaratumB's picture
Offline
Last seen: 3 hours 44 min ago
Joined: 10/29/2016 - 12:12
Posts: 6262
Location: Portugal

I’m going broke before the end of the year… Facepalm Cash

nick779
nick779's picture
Offline
Last seen: 10 hours 39 min ago
Joined: 03/09/2018 - 15:46
Posts: 449
Location: Pittsburgh, PA

Klayking wrote:
I seemed to notice that my FW3A goes for longer at the maximum regulated ~800lm level than my D4 at the same sort of brightness. Is this most likely because I just keep overshooting and ending up with 1000lm+?

Anduril will surely make it a lot easier to know how much output we’re getting. So glad it’s now included on Emisar’s newer flashlights.

I compared both my D4 and FW3A at step 130 which is full regulation for the FW3A. My D4 stepped down 2 minutes later than the FW3A with the same thermal config. (the FW3A has a slightly newer Anduril build though)

I guess more thermal mass and running the emitters in a more efficient zone has something to do with it. D4 is SST20, FW3A is XP-L HI, so I expected the FW3A to actually go longer if not near exactly the same.

I really need to crack open my D1 and flash it. RampingOS isnt bad, but I would like most of my lights to be consistent.

Hank Wang
Offline
Last seen: 37 min 43 sec ago
Joined: 10/19/2011 - 10:28
Posts: 535
Location: China

https://intl-outdoor.com, Noctigon, Emisar, flashlight components.

Ryzbor
Ryzbor's picture
Offline
Last seen: 16 hours 7 min ago
Joined: 01/21/2018 - 10:52
Posts: 374
Location: Poland
Klayking wrote:
I have found Anduril to operate just like Ramping IOS V2 if you only use the relevant button presses.

That’s not entirely true, there are significant differences.

virence.com Nichia E21A sw30+sw40 Wizard Pro ; Skilhunt H03 XP-E2 660nm ; Wizard Pro E21A 2000K ; S2+ E21A sw40 d220 ; Sofrin C01R 660nm, Mf01 Mini Nichia 219B sw35+sw40

Geuzzz
Geuzzz's picture
Offline
Last seen: 2 weeks 1 day ago
Joined: 10/25/2015 - 10:27
Posts: 1370
Location: Netherlands
Ryzbor wrote:
Klayking wrote:
I have found Anduril to operate just like Ramping IOS V2 if you only use the relevant button presses.

That’s not entirely true, there are significant differences.

I appreciate both, but I think I also prefer ramping iOS.
It just feels snappier and simpel.

RapidLux
RapidLux's picture
Online
Last seen: 3 min 58 sec ago
Joined: 03/24/2017 - 13:21
Posts: 514

Hank Wang wrote:
For sale, ship before the end of this month.

https://intl-outdoor.com/emisar-d4v2-high-power-led-flashlight-p-940.html

Where can I choose aux LED color? Would also want a 21700 tube.

Hank Wang
Offline
Last seen: 37 min 43 sec ago
Joined: 10/19/2011 - 10:28
Posts: 535
Location: China

RapidLux wrote:
Hank Wang wrote:
For sale, ship before the end of this month.

https://intl-outdoor.com/emisar-d4v2-high-power-led-flashlight-p-940.html

Where can I choose aux LED color? Would also want a 21700 tube.

Red, yellow, green, cyan, blue,magenta, rainbow aux LED options is selectable through config UI, as well as the voltage indication function. (6 fast clicks and hold the 7th to choose the aux LED options, 7 fast clicks to choose the aux LED modes)

https://intl-outdoor.com, Noctigon, Emisar, flashlight components.

bmengineer
bmengineer's picture
Offline
Last seen: 2 months 2 weeks ago
Joined: 01/26/2018 - 11:38
Posts: 1030
Location: Ontario, Canada

Hank Wang wrote:
RapidLux wrote:
Hank Wang wrote:
For sale, ship before the end of this month.

https://intl-outdoor.com/emisar-d4v2-high-power-led-flashlight-p-940.html

Where can I choose aux LED color? Would also want a 21700 tube.

Red, yellow, green, cyan, blue,magenta, rainbow aux LED options is selectable through config UI, as well as the voltage indication function. (6 fast clicks and hold the 7th to choose the aux LED options, 7 fast clicks to choose the aux LED modes)

Any chance you could show us what the PCB with the aux LEDs looks like?

Find all my reviews of flashlights and more gear at www.bmengineer.com

Agro
Agro's picture
Online
Last seen: 2 min ago
Joined: 05/14/2017 - 11:16
Posts: 6685
Location: Ślōnsk

$45 base model. That’s a good price.
D4 is bound to be among the top recommendations around here for another year. Smile

djozz
djozz's picture
Offline
Last seen: 6 hours 53 min ago
Joined: 09/07/2012 - 17:04
Posts: 17632
Location: Amsterdam

The led is nothing special, not much bigger than a single-colour aux led. But you have to adress the three colours separately to do the colour mixing and get those different colours, so the aux board and MCU must support that (occupies more pins).
Leds must be something like this:

lotrbfme
lotrbfme's picture
Offline
Last seen: 1 month 1 week ago
Joined: 12/05/2018 - 18:03
Posts: 457
Location: FL

Hank Wang wrote:
For sale, ship before the end of this month.

https://intl-outdoor.com/emisar-d4v2-high-power-led-flashlight-p-940.html

Order placed as fast as my clicks would allow me!

2 x D4v2 coming my way!!

Thank you Hank! Lookinf forward to the 21700 surprise (hopefully a 7 LED competitor to the E07 wink wink)

Lux-Perpetua
Lux-Perpetua's picture
Offline
Last seen: 5 hours 46 min ago
Joined: 03/01/2018 - 04:39
Posts: 2891
Location: at the end of the light beam

Hank Wang wrote:
For sale, ship before the end of this month.

https://intl-outdoor.com/emisar-d4v2-high-power-led-flashlight-p-940.html

 

Hank, is it possible to order the D4 V2 with the XP-L HI V4 3C, please?

https://intl-outdoor.com/cree-xpl-high-intensity-v4-3c-bare-led-p-900.html

 

I just learned 3C is above the BBL. But I'm not sure how "greenish" the tint would be.

 

I would really appreciate the option to order V4 3C bin instead of the V2 3A bin.

Is it possible to get the Carclo 10621 instead of 10622 or do you only offer 10622 and 10623?

 

Thank you very much!

 

nick779
nick779's picture
Offline
Last seen: 10 hours 39 min ago
Joined: 03/09/2018 - 15:46
Posts: 449
Location: Pittsburgh, PA

Hank Wang wrote:
For sale, ship before the end of this month.

https://intl-outdoor.com/emisar-d4v2-high-power-led-flashlight-p-940.html

Thats surprisingly well priced and I like the new details like the lanyard hole and knurling. $3 for a stainless bezel is really nice too.

Im content with what I have for now, but this is definitely a good update!

EDIT: I see the UI diagram has muggle mode on it, do these lights actually have muggle mode or no?

Omega_17
Offline
Last seen: 1 week 2 days ago
Joined: 06/02/2013 - 16:56
Posts: 1060
Location: France
nick779 wrote:
EDIT: I see the UI diagram has muggle mode on it, do these lights actually have muggle mode or no?

No it is replaced with changing the secondary LEDs options (6 fast clicks and hold the 7th to choose the aux LED options, 7 fast clicks to choose the aux LED modes)
Need a new diagram.

EDIT : No, I’m not sure about this. That’s why we need a new diagram.

nick779
nick779's picture
Offline
Last seen: 10 hours 39 min ago
Joined: 03/09/2018 - 15:46
Posts: 449
Location: Pittsburgh, PA
Omega_17 wrote:
nick779 wrote:
EDIT: I see the UI diagram has muggle mode on it, do these lights actually have muggle mode or no?

No it is replaced with changing the secondary LEDs options (6 fast clicks and hold the 7th to choose the aux LED options, 7 fast clicks to choose the aux LED modes)
Need a new diagram.

Are you sure? The D4S with Anduril was configured by clicking in lockout mode .

Nooner
Offline
Last seen: 2 hours 23 min ago
Joined: 12/18/2017 - 09:42
Posts: 335
Location: Canada

Is there a pocket clip included?
I don’t see an option to add one on the product page.

Geuzzz
Geuzzz's picture
Offline
Last seen: 2 weeks 1 day ago
Joined: 10/25/2015 - 10:27
Posts: 1370
Location: Netherlands

One impulse buy on your way Hank.

xevious
xevious's picture
Offline
Last seen: 5 months 2 weeks ago
Joined: 02/27/2013 - 21:55
Posts: 1877
Location: Hoboken, NJ USA

Ratus wrote:
That looks awfully small for a multi led SMD.
I think the ad you posted is for 25 LED each of 5 different colors, not for a multi LED SMD.
Thanks for catching that — wrong image. Corrected. I’m assuming there must be some kind of RGB LED and that by balancing the ratios each of the colors can be created. Unless there’s a different kind of multi-color SMD LED available with more than RGB?
L4M4
L4M4's picture
Offline
Last seen: 1 day 20 hours ago
Joined: 12/08/2013 - 13:43
Posts: 1323
Location: Germany

Why no white AUX-lights?

Hank Wang
Offline
Last seen: 37 min 43 sec ago
Joined: 10/19/2011 - 10:28
Posts: 535
Location: China

Nooner wrote:
Is there a pocket clip included?
I don’t see an option to add one on the product page.
Oops, just added the “pocket clip” option

https://intl-outdoor.com, Noctigon, Emisar, flashlight components.

Klayking
Klayking's picture
Offline
Last seen: 1 month 2 weeks ago
Joined: 12/17/2018 - 09:54
Posts: 155
Location: England

Hank Wang wrote:
For sale, ship before the end of this month.

https://intl-outdoor.com/emisar-d4v2-high-power-led-flashlight-p-940.html


[Excited screaming]

I bought one with all the accessories immediately. No regrets.

pinkpanda3310
pinkpanda3310's picture
Offline
Last seen: 1 day 43 min ago
Joined: 12/28/2013 - 08:45
Posts: 2796
Location: Perth

I missed the pocket clip option but wish to add it to the order if possible?

maba
Offline
Last seen: 10 hours 46 min ago
Joined: 05/27/2017 - 17:39
Posts: 154
Location: Poland

It looks sweet Smile

Scallywag
Scallywag's picture
Offline
Last seen: 1 hour 6 min ago
Joined: 01/11/2018 - 22:23
Posts: 1855
Location: Ohio, United States

If I were to order, it would be $60 for all the extras I want Silly

I think I'm going to wait and see if better colors come out, though. 

Hank, it's nice to see you continue to innovate. I like what you're doing.

It looks like the switch is more recessed than on the D4v1. I await your reviews!

agTac D25C TiL6 XHP70.2 P2 4000K FET+7135 | Jaxman M8 | MF02 | Jaxman Z1 CULNM1.TG | Blue S2+ w/ ML Special |

Igor
Igor's picture
Offline
Last seen: 1 month 2 weeks ago
Joined: 08/24/2018 - 17:14
Posts: 95
Location: Germany

What is the difference between SST20 and XPL-HI?

And also between the 10622 and 10623 Carclo optics?

Thank you.

The darkness is afraid of us.
Flashlights are cheaper than therapy.

Silent_Star
Silent_Star's picture
Offline
Last seen: 1 week 1 day ago
Joined: 06/09/2016 - 14:52
Posts: 219
Location: Tel-Aviv

Awesome! I want to buy it!
Will a warm white be available?

 Genesis 1:3 "And God said, "Let there be light,"  and there was light."

Man Without Shadow
Man Without Shadow's picture
Offline
Last seen: 7 hours 41 min ago
Joined: 02/20/2017 - 18:17
Posts: 460
Location: Wisconsin

Will there be an Aux LED rainbow option? multi colored?

When I'm spending mony foolishly, I like to do it wi$ely...

I have all the flashlights I need, but not as many as I want...

 

lightdecay
Offline
Last seen: 3 months 2 weeks ago
Joined: 06/17/2019 - 08:55
Posts: 421
Location: U.S.A.

Silent_Star wrote:
Awesome! I want to buy it!
Will a warm white be available?

One of the options is Warm White – SST20 3000K 95CRI.
Rusty4x4
Offline
Last seen: 1 month 2 weeks ago
Joined: 04/05/2019 - 14:34
Posts: 24

Will the 18350 tube from a D4v1 fit on the D4v2?

Pages