Yes
XHP50B-00-0000-0A00J4051 XHP50 IN 3 VOLT - Cutter Electronics
XHP50B-00-0000-0A00J4051: XHP50.2 LEDs, next generation of Extreme High Power LEDs, delivers lowest system cost via the best lumen density.
Est. reading time: 1 minute
Yes
intradested, ay ay ay my wallet
Interested thanks.
A chopped FT02
But Anduril is a step further, wished my FT02 had that!
Interested
Interested, thank you!
Interested.
Very interested in the two button setup with USB charging. Reminds me of the FT01 that I liked alot but didn’t buy anymore because the bezel was glued impossibly tight. Please ask them not to use glue!
The USB is C or micro?
Also, the Anduril will be the last version or the one used in FW3A?
Also: do these XHP50.2 3V exist in non CW tint so that it can be replaced? Sorry but I don’t know much about it!
I will post my interest after some of the clarifications, which I thank in advance!
Interested
Interested
Nah thanks, i wont pay double for powerbank,a 10000 mah powerbank is less than $15, and has quickcharge
Interested
Interested
Interested
I would love to see power bank function too. I have the TO56R and the powerbank does come in handy when going on vacation. Also we know the real capacity of the battery if we use a genuine cell whereas we have no idea of the actual capacity of the powerbanks from Ebay and Amazon. 10,000mah could be 3,000mah.
Interested !
Hi all,
I’m new to the forum but am interested in this if you could post to the UK.
So there’s the 3V in 5200k, I’d be interested if that were available, but not in angry blue.
XHP50B-00-0000-0A00J4051: XHP50.2 LEDs, next generation of Extreme High Power LEDs, delivers lowest system cost via the best lumen density.
Est. reading time: 1 minute
Hi all,
I’m new to the forum but am interested in this if you could post to the UK.
They sure will mate.
Insterested!