WTS/GB: NICHIA 219B NVSL219BT-V1 R9080 EMITTERS! sw45k, sw40, sw35, sw30

Updated the OP with DUV data. Thanks for reminding me.

sw40 DUV: –0.0031

sw45k DUV: –0.0044

This will certainly appease the ever growing pink crowd. Not my preference but i’m the minority. If the lower CCT ones end up closer to BBL i’d get a few

Really looking forward to my emitters now…

Sorry for all my questions but what does this show/mean?

Shows tint. If it’s positive it’s above Black Body Locus (green). If it’s negative it’s pink.

Here’s a random website’s graphic, the line in the middle is “0.0 Duv”

But the lower your CCT is the more the “green side” looks yellow. Same when you go to the extreme other end. More blue mixed shades

the k means nice and rosy! its my favorite
the no k is still a little bit rosy

here is the rundown in pictures… (one page back)

and more info

[QUOTE=staticx57;5306253]Maybe it would be worth deep diving into Color Temp and Tint.

On average we expect an SW45k to be more rosy than an SW45 [/QUOTE]

I think that is an error
I believe this is more accurate

both the sw40 and sw45k have great red rendering, the 45 CCT is cooler white, and its tint is pinker

Can someone tell me how to differentiate the cathode and anode sections? I also having trouble finding a data sheet anyone have a link. Thanks so much.

I usually place the LED with the cathode mark (triangle) on the upper right like so: [+] [-]

But following diagram shows the cathode on the left side, hence the triangle on the bottom left. Hope this helps.

Not the most scientific but here’s a general comparison of what the sw40 from this bin looks like:

The 219c 4000k looks rosier than the sw40 and sw45 in that comparison. That sw45 is not a sw45k correct?

Also is that 219c 4000k the stock emitters that comes with the FW3A? Surprised how nice it looks considering all the the 4000K 219c I’ve seen in the past are greenish.

Yep that’s the 219c in my FW3A. I was also surprised at the quality of these 219c since most of my other 219c are usually more on the yellow/greenish side. Also you are correct, the sw45 isn’t the k variant but it does have some rosiness to it. This was just a quick photo from my DSLR at a custom white balance of 5000k. Results from the camera are never as accurate as how people see these emitters with their own eyes.

Wow I wish Lumintop would be willing to sell some emitters to us individually like Convoy does.

Yeah, it’s really hard to find a good bin of the 219c. Besides these on my fw3a, the only other light I have really nice 219c are from my Oveready BOSS.

Hi Azhu, just curious here when did you get this Oveready BOSS? Or when was the approximation date it’s made

Thanks,
Clemence

It was the very first run of the Raw Ti finish. Ordered back in Jan 2018.

Ah, I see. Thanks

Did you sell these? I think I recall Dan mentioning that he got them from you?
If so and you still have some, I’d be interested in a few :wink:

Yes he did. :wink:
Only few left, all the codes are the same but I have no spectrometer to validate if they’re the same tint.

[Clemence]

sw40 on the Lumintop Tool25