Stainless or brass comes in around $40 with the extension tube (to get it to AA/14500 length) and pocket clip. Probably cheaper if you can find codes for it.
Yeah, it’s more than a S2 or Tool AA, but it’s also very close to the smallest AA light you’re going to get (the competition is with non-clicky DQG lights, haha). Since my pocket clip came in, I just can’t grab another AA light. The Sofirn will surely be stuck with a protruding, pocket-activating side switch, it won’t be as small, it’ll probably still be cool white, and for the size I’ll just wanna grab my SC62.
I am interested if it will support dual chemistries. Lower output on NiMH is to be expected and it’s fine. I already have a standard SP10S and I’d love to have one running Andúril.
Not sure how feasible it is, but I’d like to see some other emitter options as well. I’d love to have something ~4000k and high CRI in this light.
Stainless or brass comes in around $40 with the extension tube (to get it to AA/14500 length) and pocket clip. Probably cheaper if you can find codes for it.
Yeah, it’s more than a S2 or Tool AA, but it’s also very close to the smallest AA light you’re going to get (the competition is with non-clicky DQG lights, haha). Since my pocket clip came in, I just can’t grab another AA light. The Sofirn will surely be stuck with a protruding, pocket-activating side switch, it won’t be as small, it’ll probably still be cool white, and for the size I’ll just wanna grab my SC62.
I see your point…
But this flashlight is to be dumped in my Bergan along with my E03H manker headlamp.. They are used only as a backup and nothing more..
My actual EDC is my Olight Mini S1 Mini, Olight s10r III baton, along with my BLF A6…
So am not looking for something that cost too much..
I actually did have the Sofirn SP10B and loved it but it has been lost it somewhere. As to side switch always activating it, I generally mechanically lock them out(unscrew bat cap) so I never have that issue, I only leave it unlocked when am using them cobstantly.
For me E-switch and EDC aren’t compatible.
Support of a wide range of cells is handy. My guess is that AA support sells better outside the flashaholic community.
A simple UI would be fine. An UI like Zebralight would be great.
Interesting idea but more a toy than an EDC light.
But this flashlight is to be dumped in my Bergan along with my E03H manker headlamp.. They are used only as a backup and nothing more..
My actual EDC is my Olight Mini S1 Mini, Olight s10r III baton, along with my BLF A6…
So am not looking for something that cost too much..
I actually did have the Sofirn SP10B and loved it but it has been lost it somewhere. As to side switch always activating it, I generally mechanically lock them out(unscrew bat cap) so I never have that issue, I only leave it unlocked when am using them cobstantly.
Very good points. Exactly why there’s no one flashlight for everyone, and also why I love this place.
ZoomieFan wrote:
For me E-switch and EDC aren’t compatible.
Support of a wide range of cells is handy. My guess is that AA support sells better outside the flashaholic community.
A simple UI would be fine. An UI like Zebralight would be great.
Interesting idea but more a toy than an EDC light.
Yes, to me the Anduril on a light this small does feel a bit like it’s just a toy. But are we really trying to pretend at least some portion of our collections has not entered the toy category?
I’m still excited about the development to get Anduril on AA boost driver. Maybe someone will do it for a AAA light next
Dunno bout some of you, but AA, 16340,and 18350 size lights are perfect for advanced firmware, and all of my current EDC's (I got too many to count) are e-switch's. The smaller, but still powerful, the light is, the more use it gets for me. I might prefer a compact 18650, but the thinness of an AA size light is a definite advantage for carry in size and weight.
I agree. The bigger, more powerful lights I have are cool and fun but my main EDCs are still a Nitecore D10 and an S2+ shorty. The D10 was my first proper light and I still use it the most.
Anduril on an AA light would be awesome. Honestly I would be happy with a simple 1-click on/off with instant access to moonlight and turbo regardless if it has all the blinky modes or ramping (although it would be cool) etc. The lack of this UI is what has been holding me back from buying a SP10S. I guess I’ll wait it out and see what happens. Between this and waiting for the BLF LT1 I’m going crazy.
Dunno bout some of you, but AA, 16340,and 18350 size lights are perfect for advanced firmware, and all of my current EDC’s (I got too many to count) are e-switch’s. The smaller, but still powerful, the light is, the more use it gets for me. I might prefer a compact 18650, but the thinness of an AA size light is a definite advantage for carry in size and weight.
Can’t agree more.
Have well over 150 flashlights, but the one I EDC everyday is the Lumintop Tool AA 2.0.
Even just use the Eneloop as opposed to the 14500 because of longer run times. Can’t stand bulky 18650 in pocket and on belt does not suit.
On the computer desk are currently 16 lights, mainly 18650 but also 4 AAA, 2 AA/14500 and 2 18350’s
One I reach off here most is the Astrolux S1 18350 in neutral tint.
—
“History doesn’t repeat itself, but it sometimes rhymes,” Mark Twain
…
After the Apocalypse there will be only 2 things left alive, Cockroaches and Keith Richards
Dunno bout some of you, but AA, 16340,and 18350 size lights are perfect for advanced firmware, and all of my current EDC’s (I got too many to count) are e-switch’s. The smaller, but still powerful, the light is, the more use it gets for me. I might prefer a compact 18650, but the thinness of an AA size light is a definite advantage for carry in size and weight.
Can’t agree more.
Have well over 150 flashlights, but the one I EDC everyday is the Lumintop Tool AA 2.0.
Even just use the Eneloop as opposed to the 14500 because of longer run times. Can’t stand bulky 18650 in pocket and on belt does not suit.
On the computer desk are currently 16 lights, mainly 18650 but also 4 AAA, 2 AA/14500 and 2 18350’s
One I reach off here most is the Astrolux S1 18350 in neutral tint.
I’m interested if that is still being recorded, would be really neat to have dual chemistry support, or at the least a great e-switch firmware in a AA sized light.
There are some great ideas already but now it's up to Sofirn's engineering to develop a corresponding driver layout. Once the hardware is ready, Toykeeper may be able to start adapting Andúril to run with the new driver. The biggest challenge is to summarize the outcome of all these ideas in way that Sofirn's engineering can work with it. Furthermore, we need to find a more effective way of direct communication with their engineers to discuss technical issues. The language barrier (English => Chinese => English) might be another obstacle we have to deal with.
A with many projects all over the world, effectiveness and efficiency depend on proper communication.
It sounds like loneoceans a few posts above may be willing to help with designing a driver. I know that Sofirn has a decent driver designer in-house but this flashlight, if both full AA and 14500 support is still the goal, asks for a very special driver.
It sounds like loneoceans a few posts above may be willing to help with designing a driver. I know that Sofirn has a decent driver designer in-house but this flashlight, if both full AA and 14500 support is still the goal, asks for a very special driver.
I got the same idea when he chimed in! Maybe it can be a “beginning”?
interested in a whole bunch, if operating with a nimh battery will be assisted!
a variety of different host colors and led tints is always nice to have
Interested too in a BLF GB variant. I have the SP10S in Blue, and one of my favorite EDC AA/14500 lights. It works great with wither a 14500, AA Alkaline, or a NimH AA.
—
That Canadian flashlight guy & Lantern Guru -Den / DBSARlight
Three years later…
…in a galaxy, eh, right around the corner…
09 F9 11 02 9D 74 E3 5B D8 41 56 C5 63 56 88 C0
Stainless or brass comes in around $40 with the extension tube (to get it to AA/14500 length) and pocket clip. Probably cheaper if you can find codes for it.
Yeah, it’s more than a S2 or Tool AA, but it’s also very close to the smallest AA light you’re going to get (the competition is with non-clicky DQG lights, haha). Since my pocket clip came in, I just can’t grab another AA light. The Sofirn will surely be stuck with a protruding, pocket-activating side switch, it won’t be as small, it’ll probably still be cool white, and for the size I’ll just wanna grab my SC62.
Old Lumens Contest 2020 - Hand-made light category
ZL SC62(w) | Jaxman E2L XP-G2 5A | Purple S2+ XPL-HI U6-3A | D4 w/ Luxeon V | RRT-01 | Purple FW3A, 4000K SST20 | Baton S1
Boruit D10 w/ Quadrupel Fet+1/Anduril | EagTac D25C Ti | DQG Slim AA Ti | Jaxman E3 | UF-T1 by CRX | Olight S15 Ti | Nitecore EX11.2
L6 XHP70.2 P2 4000K FET+7135 | Jaxman M8 | MF02 | Jaxman Z1 CULNM1.TG | Blue S2+ w/ ML Special | Thrunite T10Tv2
Supfire M6 3xXHP50.2, Sofirn C8F, Unfinished: Sofirn SP70, IYP07/Tool AAA hot-rods, Jetbeam E3S
Others: Nitecore EC23 | Nebo Twyst | Streamlight ProTac 1AA | TerraLux LightStar 100
I am interested if it will support dual chemistries. Lower output on NiMH is to be expected and it’s fine. I already have a standard SP10S and I’d love to have one running Andúril.
Not sure how feasible it is, but I’d like to see some other emitter options as well. I’d love to have something ~4000k and high CRI in this light.
I see your point…
But this flashlight is to be dumped in my Bergan along with my E03H manker headlamp.. They are used only as a backup and nothing more..
My actual EDC is my Olight Mini S1 Mini, Olight s10r III baton, along with my BLF A6…
So am not looking for something that cost too much..
I actually did have the Sofirn SP10B and loved it but it has been lost it somewhere. As to side switch always activating it, I generally mechanically lock them out(unscrew bat cap) so I never have that issue, I only leave it unlocked when am using them cobstantly.
Problemes d'erection [url=https://www.viagrasansordonnancefr.com/]viagrasansordonnancefr.com[/url] meilleure pharmacie
For me E-switch and EDC aren’t compatible.
Support of a wide range of cells is handy. My guess is that AA support sells better outside the flashaholic community.
A simple UI would be fine. An UI like Zebralight would be great.
Interesting idea but more a toy than an EDC light.
Chargers: 1xBasen BD01 5/5, 1x Gyrfalcon All-88 4/5, LiitoKala: 3x100 3/5, 2x202 3/5, 1x402 3/5., MiBoxer C4-12 3/5.
Flashlights: DQG Tiny III 26650 5/5, FiTorch MR35 3/5, Haikelite SC26 HD 3/5, Lumintop Tool AA/AAA 4/5, Nitecore LA10, Sofirn C01 BLF 3200k/5600k 2/5, Zebralight H600Fc 3/5.
Powerbanks: EasyAcc 26800 mAh 3/5, Xtar PB2 4/5, Xtar PB2S 5/5
Waiting for: (DQG Tiny) 21700 EDCs.
OPR would be nice.
Smile, you cannot kill them all.
The SP10s hase OP so i think the SP10s BLF will have one 2
Ah, thanks!
Smile, you cannot kill them all.
Very good points. Exactly why there’s no one flashlight for everyone, and also why I love this place.
Yes, to me the Anduril on a light this small does feel a bit like it’s just a toy. But are we really trying to pretend at least some portion of our collections has not entered the toy category?
I’m still excited about the development to get Anduril on AA boost driver. Maybe someone will do it for a AAA light next
Old Lumens Contest 2020 - Hand-made light category
ZL SC62(w) | Jaxman E2L XP-G2 5A | Purple S2+ XPL-HI U6-3A | D4 w/ Luxeon V | RRT-01 | Purple FW3A, 4000K SST20 | Baton S1
Boruit D10 w/ Quadrupel Fet+1/Anduril | EagTac D25C Ti | DQG Slim AA Ti | Jaxman E3 | UF-T1 by CRX | Olight S15 Ti | Nitecore EX11.2
L6 XHP70.2 P2 4000K FET+7135 | Jaxman M8 | MF02 | Jaxman Z1 CULNM1.TG | Blue S2+ w/ ML Special | Thrunite T10Tv2
Supfire M6 3xXHP50.2, Sofirn C8F, Unfinished: Sofirn SP70, IYP07/Tool AAA hot-rods, Jetbeam E3S
Others: Nitecore EC23 | Nebo Twyst | Streamlight ProTac 1AA | TerraLux LightStar 100
Dunno bout some of you, but AA, 16340,and 18350 size lights are perfect for advanced firmware, and all of my current EDC's (I got too many to count) are e-switch's. The smaller, but still powerful, the light is, the more use it gets for me. I might prefer a compact 18650, but the thinness of an AA size light is a definite advantage for carry in size and weight.
I agree. The bigger, more powerful lights I have are cool and fun but my main EDCs are still a Nitecore D10 and an S2+ shorty. The D10 was my first proper light and I still use it the most.
Anduril on an AA light would be awesome. Honestly I would be happy with a simple 1-click on/off with instant access to moonlight and turbo regardless if it has all the blinky modes or ramping (although it would be cool) etc. The lack of this UI is what has been holding me back from buying a SP10S. I guess I’ll wait it out and see what happens. Between this and waiting for the BLF LT1 I’m going crazy.
Can’t agree more.
Have well over 150 flashlights, but the one I EDC everyday is the Lumintop Tool AA 2.0.
Even just use the Eneloop as opposed to the 14500 because of longer run times. Can’t stand bulky 18650 in pocket and on belt does not suit.
On the computer desk are currently 16 lights, mainly 18650 but also 4 AAA, 2 AA/14500 and 2 18350’s
One I reach off here most is the Astrolux S1 18350 in neutral tint.
“History doesn’t repeat itself, but it sometimes rhymes,” Mark Twain
…
After the Apocalypse there will be only 2 things left alive, Cockroaches and Keith Richards
Isn’t the S1 a BLF A6????
Problemes d'erection [url=https://www.viagrasansordonnancefr.com/]viagrasansordonnancefr.com[/url] meilleure pharmacie
yes
Texas Ace Lumen Tube and JoshK Sphere calibrated with Maukka lights
Click this to go to signature links. I'm still around, just not reading many new threads.
Thanks to contactcr for pointing this thread out. Sure looks like it'll be a fun exercise in driver design!
www.loneoceans.com/labs/
- Next-gen Switching Drivers: Lume X1 and Lume1
- High Power Boost Drivers: GXB100 GAN 100W, GXB172 17mm 50W
- Older: GXF22, GFS16, GXB17 & GXB20
how is this project going, any news to update ?
...where Frugal meets with Flashlight!
つ ◕_◕ ༽つ
I’m interested if that is still being recorded, would be really neat to have dual chemistry support, or at the least a great e-switch firmware in a AA sized light.
Interested!
There are some great ideas already but now it's up to Sofirn's engineering to develop a corresponding driver layout. Once the hardware is ready, Toykeeper may be able to start adapting Andúril to run with the new driver. The biggest challenge is to summarize the outcome of all these ideas in way that Sofirn's engineering can work with it. Furthermore, we need to find a more effective way of direct communication with their engineers to discuss technical issues. The language barrier (English => Chinese => English) might be another obstacle we have to deal with.
A with many projects all over the world, effectiveness and efficiency depend on proper communication.
It sounds like loneoceans a few posts above may be willing to help with designing a driver. I know that Sofirn has a decent driver designer in-house but this flashlight, if both full AA and 14500 support is still the goal, asks for a very special driver.
link to djozz tests
I got the same idea when he chimed in! Maybe it can be a “beginning”?
MY REVIEWS THREAD /// My Flashlight Collection ///
Mods: 1 / 2 // TIR: 1 / 2 // Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 /// My Review's Blog (PT) /// OL Contest 2019 /// OL Contest 2020 /// GIVEAWAYs: 1 / 2
I am interested in one!!
Interested as well!
Interested
interested in a whole bunch, if operating with a nimh battery will be assisted!
a variety of different host colors and led tints is always nice to have
Interested if compatible with NiMH.
Interested too in a BLF GB variant. I have the SP10S in Blue, and one of my favorite EDC AA/14500 lights. It works great with wither a 14500, AA Alkaline, or a NimH AA.
That Canadian flashlight guy & Lantern Guru -Den / DBSARlight
Interested!
Pages