The tint seems amazing. I hope the warmer temps will have similar DUV values. Would love to buy several of these on 16-18mm mcpcb to go inside the Thrunite T1 that comes with a very nice 12V driver.
If this can be made in 3V and 6V would make this much more practical. Maybe rngwn can send this test report to the manufacturer.
Thanks djozz, looks like a winner.
This led is made by Getian. I wonder how it throwsâŚitâs probably flip-chip so may be worse than wecould hope for.
Looks like a great use for the loneoceans 100w boost driver.
I also wonder about the performance of lowers CRI variantsâŚ.
With Simonâs 12V driver it should yield more than 2000 high CRI lumens on turbo. Iâd be satisfied with that for now until something better comes along. Thank you for the test, djozz!
I unsoldered the led to have a look at the footprint. It looks like it uses a board made for XHP70 in 12V configuration. I checked continuity of the thermal pad and the core and there is, so the board is DTP: the entire thermal pad seems one with the core.
Iâve never seen a bare 12v or 6v mcpcb⌠based on the picture above, what indicates visually that it is either 12v or 6v ? I have a flashlight in either one of those and Iâd like to examine it.