BLF Interest List: EX3 High Current Beryllium Copper Silver Plated springs - Still selling my springs :)

I really hope they are good! I have had 2 bad experiences with two different temp LH351D that were supposed to be right on the BBL but they were noticeably greener than any other high CRI similar temp and “on the BBL” emitter I have. Very disappointing after I’ve heard so many good things about good binned LH351D. Luckily I like warmer tints, so please make this happen!

The LH351D is still in planning. I’m waiting to get back a response to see how many units we need to get the T tint bins we want.

The problem is that last time, the min quantity to have some choice in tint bins was 5000pcs, so while something like 2000-2500pcs would be a huge improvement still, it would still be way too big, even for me.

HOWEVER, one thing is certain: after I sell off the rest of the SST-20s, I will probably order another 950-1000pcs batch since I have confirmation that my distributor is stocking SST-20s FD2. Not FA1 yet though.

Will FA1 ever be made? If so, that would be OMG sweet!! Maybe you can team up with MTN or maybe talk to TA and see if he can get Lumintop or Mateminco to do a joint order for the FA1 tint bin. TA was the one that got them to use the FA3 and FD2 in their lights.

Btw, I don’t really trust Samsung binning. The two LH351D groupbuys in the past was supposed to be primarily below the BBL but both ended up far above the BBL. Hopefully the batch you get will be below the BBL and even on at low amps would be good enough.

You know, what could be the reason for under BBL bins to be “harder” to get?

Is it really harder for them to be made? No. They just have to tune the phosphor recipe differently.
So? Because lemons, lemmings, etc. The greener or higher Duv, the more lumens. Thus, no surprise they are made so they meet the CRI spec while being able to bin them higher and claim more lemons. They game the crap of it. Is this bad? Wellp, in my honest opinion sort of it is. Is it…

1. likevii: 20x of each size BeCu 3rd Gen spring + 3/8 SST-20s FD2*
2. Lund1660: x SST-20s FD2*
3. KevinZA1988: x SST-20s FD2*
4. contactcr: 10x large and 10x small 3rd Gen BeCu springs

*Orders with SST-20s

Still haven’t received any response from the concerned people who wanted their LEDs in the GB.

As said before, once Wednesday morning rolls around and nobody answered, I’ll ship the LEDs to other people.

I take 15x LH351D

Seems like nobody responded for the 4000k SST-20s.

Will send a PM soon to these people:

1. likevii: 20x of each size BeCu 3rd Gen spring + 3/8 SST-20s FD2*
2. Lund1660: x SST-20s FD2*
3. KevinZA1988: x SST-20s FD2*
4. contactcr: 10x large and 10x small 3rd Gen BeCu springs

2,75$US each since the GB is over.

Interested in the new bin of lh351d, say 10.

Who were those presumed to respond?

Members that never came back to the forum, and did not respond after 2 weeks.

Anyway, I messaged them all three times, and they never responded.

Checked them from previous group buys, and never found any payments from them.

Payment sent

I am not sure where you sign up for the FC40 LED group buy. I would like 2x of the A4 bin LED’s.

Interested in;

6 x GT FC40 4000K

20 x LH351D 4000K

You don’t anymore.

Was my prior interest in 1x 4000k and 1x 5000k put on the list? I did not see my name on it when I looked before?

Not that, look at the link.

The GB for the FC40 on my part is done. Not doing it anymore.

Oh, I never really understood the outcome of that post and what it meant for the GB.

I guess something is lost in the translation —-Made me wonder to

What about the LH351D 4000K—-You still looking into them

Ok then.

Orders with only springs will be shipped this Monday.

Those with LEDs will have to wait since there’s a customer who requested the last LEDs, and he payed on Tuesday, so will ship on Friday.