I’m very interested! I have a couple of SP10s and they’re great little lights.
I’m interested … 14500/AA would be nice but I’d be in for one even if it ended up being 14500 only.
Interested.
Interested.
Thank you.
interested
u mean this?
Sofirn-SP10S-90-CRI-LH351D-800lm
is this a nice light to buy if u dont have one that runs on 14500 and with the nice samsung emitter good buy ?
Interested in one also (especially clear ano)
Interested if I can use a AA Lithium.
interested
It’s a great light. I have the SP10B and SP10S and was going to do some comparison shots but haven’t got round to it yet. If they combined the UI of both of those lights it would be my favourite budget AA light.
Interested
I have the SP10S it’s my daytime EDC.
With the changes suggested I definitely want a few.
Now for a magnetic tail cap and/or rotatable head like the Nicron N7.
ok thanks, does the SP10S work on button tops or flat tops also?
ok thanks, does the SP10S work on button tops or flat tops also?
It works on both button tops and flat tops, sins it hase springs on both sides
it hase a button in the head like hodor pointed out in the next post, so i dont think flat tops will work.
i could try when i get home if you would like.
Incorrect, the head does not have a spring. I only have button tops so can’t check if flat tops work.
Incorrect, the head does not have a spring. I only have button tops so can’t check if flat tops work.
you are right, the head doesnt have springs, i completly forgot
sorry about that, will correct my post
There’s a raised “surround” encircling the button so I imagine it could be battery dependant for flat tops. Also depends if the surround has an electrical ennection or if it’s just the button.
Interested!
AA/Ni-MH compatibility, blue/ red ano with non-greenish emitter would be great too.
mortuus:how is this project going, any news to update ?
There are some great ideas already but now it’s up to Sofirn’s engineering to develop a corresponding driver layout. Once the hardware is ready, Toykeeper may be able to start adapting Andúril to run with the new driver. The biggest challenge is to summarize the outcome of all these ideas in way that Sofirn’s engineering can work with it. Furthermore, we need to find a more effective way of direct communication with their engineers to discuss technical issues. The language barrier (English => Chinese => English) might be another obstacle we have to deal with.
A with many projects all over the world, effectiveness and efficiency depend on proper communication.
If it helps, I can do some translation. :nerd_face:
Interested, especially to get better “bright vs runtime” options.