[♛ FreemeGB] Fireflies PL47 Gen II 4*XP-L/ Nichia/ SST20 Hi CRI 21700 Right Angle Flashlight - ENDED

TQ FreeMe, that help…. :frowning:

Finally I contacted them via messenger regard the order back since 3rd october. Their response was, the item I’ve order still have to be restock. they promised to restock in 10 bussiness day. Can you believe this? Look like a negotiation happen here. After almost 3 weeks. Goshh, I hope their are honesty, bcos all this time you give a lot of excuses. we as BLF’s representative to tell the world and BG make an attitude like this? how?

In 10 days.

Took 3 weeks but mine finally says shipped

My PL47 Gen 2 arrived this Monday, and the truth is that I am very happy with it, here you can see some photos:
















I forgot to post, I ordered a light w/ magnetic tail and pocket clip.

Just want to remind that, there already a review’s video for FIREFLIES PL47G2 by Flasholic. Well done, very usefull and thank a lot.

Here the link, Fireflies PL47G2 SST20 4000k CRI 95

I received my light yesterday. Works as advertised.

I had already cancel my order. Done. Now I need to purchased directly from FIREFLIES website.FIREFLIES

Bangood said ” all 4 item is out of stock”. That it, I’m done. I don’t need to say anything, but I’ll leave that for your own opinion…

My order turned out well. Purchased and recieved pretty quickly from banggood. However, the accessories are on backorder.

Is it just mine or is the button on these disgustingly squishy and makes a squeaking noise if you run your finger across it?

I would like to buy one please

I thought I read something about the Nichia 219B SW45K LED on the previous PL47 (gen 1) and the newer PL47 (gen 2), and I think it also affects the other newer “gen 2” flashlights like the ROT66 (gen 1 & gen 2, Nichia 219B SW45k).

I have the PL47 gen 1 (Nichia 219B SW45k R9080). Also purchased the PL47 gen 2 (Nichia 219B SW45k), but comparing beamshots of the 2, the PL47 gen 2’s Nichia 219B appears to have a slight bluish or purplish hue/tint? What could be the cause of that? I notice they use different TIR optic for gen 1 vs gen 2.

(Note: in the beamshots below, the 2 lights may not be set at exactly the same brightness levels… ;
the PL47 gen 2 (right side) has a slight bluish/purplish tint that doesn’t appear present on the PL47 gen 1)

Left side is PL47 gen 1 (219B SW45K) ; Right side is PL47 gen 2 (219B SW45k)

BG is terribly telling more excuses as my ROT66 was placed Oct 3,2019 and their support team is telling " very near to be shipped within next 24-48 hours - but now its been over a month.!!!

I didn't follow ROT66ii thread for quite sometime. I remembered there are complaints regarding the claimed output?

Probably just slightly different binning (could also happen in damaged emitters but your shots don’t look out of the ordinary). Some have also speculated the Gen I ROT66 and PL47 actually had sw45 in some units instead of sw45k, the latter is more rosy.

My Gen I PL47 actually looked much rosier than other 219B lights I’ve had and the beamshots other owners posted of their PL47s too, but cameras often don’t match reality so who knows.

Received mine w/ 219B from Banggood today, ordered on Nov. 1. The tracking they gave me was never scanned and was different than what was on the package. I used expedited UPS shipping to US. Tracking shows it shipped from Canada.

The tint on mine is very slightly blue/purple compared to my 219C 4000k lights, it makes them look yellow. I think the tint is pleasant but I haven’t used it outdoors yet. I don’t have any other 219B’s to compare to.

im interested, never got an email.

Sent. [quote=Bruno28] im interested, never got an email. [/quote]

Has anybody found a way to dim the aux LEDs?

Mine awaiting delivery. Set time, two weeks expected to arrives…

Anyone get the pocket clip and/or magnetic tail cap? It’s been on backorder for a while.