[♛ FreemeGB-NOV] Haikelite HT70 4*SST70 6500k 17000 lumens 18650 Flashlight - ALIVE!

Looklike 2s are directly drived to the LEDs

The tube is quite long for 4*18650, i hope it is 4*21700, it’s easy to find high drain 21700 with high capacity

Btw, I’m in :wink:

They is a super fair price for a light that has decent lux and great output.

I’m in! code please

Price is similar to our previous MT09R gb. I will pm your guys the deal tomorrow (10th).

Thank you.

Description states 5000K OR 6500K. Banggood only gives 6500K option?

1.Any idea what kind of step down and when?

.Thanks

I want one.

I am IN “IF” it indeed comes in Neutral White. :sunglasses: NW Please. Code Please!

I am surprised no one has asked these important questions.Especially #1 and #2.So I will ask them.

1. What is the UI

2. What are the Outputs of the other mode groups?

3. What type of battery carrier if any is used? 2 X 4 carrier with option of using 2/4/6 or 8 batteries?

4. Are 10Amp high drains enough[ MJ1 OR GA’S]?

Off hand the Only 3000mAh high drains I can think of is the 30Q,LG HG2 and the VTC6.

IF 10amps are enough I would prefer the 3500mAh GA’S OR MJ1.

Thanks

1. ?
2. ?
3. No carrier; one piece battery tube design. All positives face towards driver. All negatives at the springs in the tail cap.
4. 10A like GA is definitely enough. However, there is a chance it uses a FET drive, so you could get a tad more output with something like a 30Q or VTC6. But I doubt you would notice the difference with the naked eye.

From Djozz’s test the output is pulling around 7 amps per LED.

Thanks. I have 8 X GA BT Protected that have about 25 cycles and have been stored since last November…….now they can have a home!

Thanks. That seems to confirm that 10Amp GA’S are enough.

Interested!

The current going through the LED is not the same as the current going through the batteries.

There is a possibility that it is not going to fit, as protected cells are a bit longer than unprotected cells.

Interested in Code for nw grey or sandy Version ... Need a Battle to DT70

[quote=hIKARInoob]

OK. In post #15 you state that 10 amp like GA is plenty. Is that still true?

If they are too long I will have to get some FT high drains.

NW must be available before I get it. I forget what light it was. I remember they initially just had CW before they got NW.

Thanks

[quote=BaronVonEissler]

Yes 10A GA, 8 pieces for this light, is definitely ok. One thing you might want to consider is to nevertheless get 15A cells like 30Qs to future proof in case a new 8x18650 monster light you want requires more than 10A per cell. You’re not going to notice too much in terms of capacity anyway.

Unprotected button top battery preferred. Haikelite recommends Samsung 30Q grade on their site for this light.

[quote=BaronVonEissler]

Interesting light. Performance is amazing for the head size. Just wish it was shorter (4 cells) and a bit lighter. You can send me a coupon but I’m not sure if I’m gna buy it. Do you know how long the 11:11 GB offer will last?

[quote=freeme]

Unprotected button top battery preferred. Haikelite recommends Samsung 30Q grade on their site for this light.

Ok,Thank you.

Four more important questions to answer.

1. What is the UI?

2. What are the other mode groups output?

3. When is Neutral white available? It is Not an option on Banggoods site.

4. Is this the Only form of step down? “Built-in advanced intelligent temperature control settings, can automatically adjust the brightness according to the working state of the flashlight and the outside temperature”.

Thanks. I am sure others would also appreciate the answers. I am just the one posing them! :smiley: