Coast g26 14500 compatibility.

4 posts / 0 new
Last post
ThirdHandChain
ThirdHandChain's picture
Offline
Last seen: 1 month 3 weeks ago
Joined: 09/05/2019 - 16:07
Posts: 69
Location: Virginia, USA
Coast g26 14500 compatibility.

Does anyone know if you can use two 14500 batteries in a Coast G26 instead of two AA's? I know it's roughly double the voltage but I'm curious to know if anyone thinks that the light could "handle it" without burning anything up.

Thanks in advance. 

Not really a noob but I still haven't purchased a soldering iron. 
THC 
buck91
buck91's picture
Offline
Last seen: 43 min 24 sec ago
Joined: 07/29/2016 - 08:21
Posts: 633
Location: Michigan

No idea but I wouldn’t waste much effort on Coasts.

Big_Sam
Big_Sam's picture
Offline
Last seen: 1 month 2 weeks ago
Joined: 03/21/2018 - 07:54
Posts: 209
Location: UK

If Coast are like LED Lenser, then they use resistors in the tailcap switch, the LED would fry with the higher voltage. With the 14500 you would be getting 8.4v fully charged, rather than 3v of AA batteries. I wouldn’t expect it to live for long.

Nachtfeuerzeug
Nachtfeuerzeug's picture
Offline
Last seen: 36 min 18 sec ago
Joined: 08/31/2013 - 16:10
Posts: 696

You may use one 14500 with a conductive spacer of 50 mm length. It may shine brighter but I don't know for sure if the driver can handle that slightly higher voltage. 

EDC

FW3A, SST20 4000K || S21A, Crescendo Mtn20DD, LH351D 4000K || SP32A, SST40 5000K

Recent/ongoing Mods:

S2+, TexAven 17mm, LH351D | S21A, Crescendo 20mm, XPL HI 5000K | L2 w/Mtn17DD Zener Guppydrv, XHP-50 | C8+ OP, DD XHP-50

SP32A w/SST40 5000K | TIR Upgrades | EagleTac clip | Ultrafire C2 w/6A 20mm & LH351D | S2+, Biscotti, Nichia 219C 2700K |

Reviews:

Sofirn SP31 v2.0 Tactical Flashlight (Cree XPL HI) || Sofirn SD05 Scuba Diving Flashlight || Sofirn SC31 USB Rechargeable (XP-G3) || Sofirn SC31 Pro 5000K