Drop.com $20 off - Lumintop Copper/Brass Tool for $10 - Discount not available as of 12/10/19

Buy / Sell BudgetLightForum Deal Alerts
114

I just checked to make sure I wasn’t creating any FUD. :smiley:
But you can lock the light out by unscrewing the head just a 1/8 of a turn.
Unscrewing the tailcap does nothing.

115

Thanks!, thats another good bit of Tool Lore, with several features…

1. If I unscrew and retighten the head, while the light is switched ON, it will advance modes too, no FUD!

and,
2. if I turn the light off at the head instead of the tailswitch

Next time I tighten the head, the light will be ON (no memory)

and

3. If I only unscrew the head a little, I can press the head to the body, for momentary on (which I hate, as this also turns the light on in pocket).

Is it a Feature or a Bug, when a Feature Bugs ME?
I unscrew more than a little, to defeat the undocumented, seldom mentioned, momentary on, feature/bug, that all twisties have. Even the infamous Fenix E01…

but I digress
now back to the Tracking Update on my CU Tool:

Hello Copper Tool,

Your item arrived at a shipping partner facility at 12:00 am on November 24, 2019. This does not indicate receipt by the USPS or the actual mailing date.

I bet it gets here in time for Xmas :wink:

And now for some Real FUD

If you dont buy the CU Tool NOW, you will NEVER get a chance to buy it at this price again… lol lol lol

116

I just ordered the black aluminum with Nichia and added expedited shipping to bring the total up to $30 to qualify for the $20 discount.

I only saved $15, but I’m more likely to use the much lighter aluminum version for hat brim use than copper or titanium.

117

congratulations!
did you choose High CRI?

another really good option for a hat is this version w pebbled Tir,
https://www.amazon.com/LUMINTOP-Flashlight-Pocket-Sized-Waterproof-Backpacking/dp/B07G98XCG4

but it does not have a High CRI option… and it is MLH w memory,

not LMH w no memory like the massdrop version.

choices are good :slight_smile:

118

I got the high CRI version of aluminum. I hope the output on medium is high enough for my intended use. High doesn’t last very long. The low CRI version tested 30 lumens higher on both high and medium, IIRC.

I can’t abide with MLH mode sequence.

119

Can the pebbled TIR be obtained separately and inserted in any Lumintop Tool? Or is the internal arrangement different enough that reflector heads aren’t compatible? And if not, is it feasible to remove the OEM glass & swap with pebbled lens?

120

all good questions, I have no answers
some pics to hold us over

121

jon_slider - PLEASE NO MORE PURPLE TINTS!

122

Seems like a good deal for what it is, I’ll probably pick one up soon

123

lol
I was not trying to show color, just beam shape

thanks for letting me know you care :slight_smile:

here you go, same Tool, same LED, different white balance

I think today is the last day to save $20

124

Bless you, sir! Much better.

125

They have the brass version now.

I already ordered one for 12.71 shipped.

126

can i know inner diameter keyring clip? thank you

127

This one was out of stock earlier. I will have to get this one as well! :smiley:

Thanks for the heads-up, I will also add the link in the opening post.

128

Yes. I already ordered 1 brass and 2 copper. Haha. The copper is now out of stock.

129

My copper tool has been shipped yesterday. Thank you for drawings my attention to this great deal. :money_mouth_face: :heart_eyes:

130

Damn you guys cost me money.
Brass ordered.

131

Are you paying full price for two of those?

I thought that the $20 discount for a $30 order could only be applied once?

132

Just create a “new” account :wink:

133

Mine was shipped on 20th Nov. I just tried to track the order few hours back and showed : “The Item is at the shippers warehouse”

Just checked again…

Nov 25, 2019 09:50 The item is pre-advised to PostnL…