Vapcell S4+ Analyzing Charger

Today, somebody asked about this S4’s capability to make proper positive contact with a flat-top 21700…perhaps also to other flat-tops. Remember when even the SkyRC MC3000 had contact issues with flat-tops too? Yes, this Vapcell S4 does make positive contact with the 21700, and all my other flat-tops. See why in the photos below: (edit: I just checked, my Miboxer cannot also make contact with my 26650 flat-tops too!)
SkyRC MC3000 left, Miboxer C4-12, Vapcell S4+ right:

The Samsung 21700 inside the bay still has plenty of room to spare, up to 75mm.

In for 1

Interested.

In for 1 as well

Interested

Interested

The sky rc mc3000 doesn’t have contact issues anymore , the newest version has raised contacts.

Too bad, can’t fit some protected 21700s which are over 75mm.

why is a 21700 over 75mm protected? that’s so long…

I wonder what current light/s here in BLF that I’m unaware of that could easily handle a cell at 76mm or more.

Good to know, that’s the BLF spirit right there! :beer:

Interested

People who are familiar with an Opus BT-C3100 will have no problems handling this one :slight_smile:
Yes, I’ve won the Vapcell GAW.
Like it or not: it beeps when a task is completed. Which is (very) fine with me.

interested

Interested ( if UK plug supplied ).

In Vapcell’s website, it has this choices available:

EU plug

US plug

UK plug

AU plug

Wow, it has a bell tone which is usefull as a reminder…I usually need this kind of feature becos, sometime I get busy and had to tell my nephew to watch over. With bell, it will be easy and never had to explain long stuff above charging battery…keep things short, when you hear a bell, it full and pull them immediate…

Wuben A21 Apollo. Tested. The original cell is 74.6 millimeters long. I added a magnet 2 millimeters thick. The tail can be screwed. There is still a small margin.


Interested

interested