Thrunite T10T V2 - MCPCB size

3 posts / 0 new
Last post
Last seen: 4 hours 54 min ago
Joined: 06/19/2015 - 11:31
Posts: 155
Location: Ohio
Thrunite T10T V2 - MCPCB size

I want to do an LED swap in my T10T V2. Does anybody know what size MCPCB is used in this light?

Last seen: 6 days 2 hours ago
Joined: 09/29/2014 - 14:27
Posts: 1049


Ceilingbounce – flashlight testing and runtime graphs for Android

Last seen: 10 months 3 weeks ago
Joined: 10/16/2019 - 00:40
Posts: 1

I recently modified my Thrunite T10 II with a LH351D taken from my Sofirn SP10S. It was rather difficult to find a 14mm MCPCB with a reflowed LED, although I didn’t try that hard.

Instead I took a 16mm Nichia 219C from mtnelectronics and dremeled the sides so that it fits.

The ID of the SP10S is exactly 15mm. Just to give you an alternative idea if you can’t find any 14mm. Dremeling it smaller was easier.