Thrunite T1 – measurements and thoughts

23 posts / 0 new
Last post
M4D M4X
M4D M4X's picture
Offline
Last seen: 1 week 1 day ago
Joined: 03/19/2014 - 05:17
Posts: 8821
Location: Austria (GMT + 1)
Thrunite T1 – measurements and thoughts

Hello my dear friends!


Today i present you the Thrunite T1 – a 18350 powered EDC with magnetic tail and USB charging!
watch the video to find out my pros and cons – and tell me yours!

 

PLEASE NOTE
i do not work in "reviews, deals and codes" for the time being
maybe M4D M4X will return one day, but until then:

THANK YOU FOR YEARS OF YOUR SUPPORT AND FRIENDLY CONTACTS!

Anthon
Offline
Last seen: 4 hours 47 min ago
Joined: 09/07/2015 - 10:33
Posts: 667

I have this light and I love it, it’s been carried daily as my EDC since I bought it

M4D M4X
M4D M4X's picture
Offline
Last seen: 1 week 1 day ago
Joined: 03/19/2014 - 05:17
Posts: 8821
Location: Austria (GMT + 1)

Anthon wrote:
I have this light and I love it, it's been carried daily as my EDC since I bought it

great! 

PLEASE NOTE
i do not work in "reviews, deals and codes" for the time being
maybe M4D M4X will return one day, but until then:

THANK YOU FOR YEARS OF YOUR SUPPORT AND FRIENDLY CONTACTS!

Di_Joker
Di_Joker's picture
Offline
Last seen: 4 hours 25 min ago
Joined: 02/21/2018 - 08:07
Posts: 380
Location: RU

The brightness and heating graphs are great! I love this part of the review! LOL
But why they do not offer the 18650 tube I do not understand. Facepalm

Sorry for my poor english.

bikenber73
bikenber73's picture
Offline
Last seen: 1 week 4 days ago
Joined: 11/12/2011 - 15:09
Posts: 2155
Location: Maryland USA

I have this one as well. Great package.

They now have a desert tan one…….

sp5it
sp5it's picture
Offline
Last seen: 13 hours 3 min ago
Joined: 12/25/2012 - 07:51
Posts: 1317
Location: Poland

Any review for people who can read Martin?
I prefer to read review 1-2 minutes instead of wasting 21.
Mike

Think of how stupid the average person is, and realize half of them are stupider than that. George Carlin

 Anyone offended by my signature please fill Complaint Form. Thank you.

 If a lot of people listen to Slayer, the world would be a better place to live" - Tommy Wiseau

freeme
freeme's picture
Offline
Last seen: 41 min 33 sec ago
Joined: 11/14/2013 - 22:00
Posts: 9970

Lock has done a good job here>  http://budgetlightforum.com/node/68707

sp5it wrote:
Any review for people who can read Martin? I prefer to read review 1-2 minutes instead of wasting 21. Mike

1thedeals.comyoutubeAstroluxNealsgadgetsolight

sp5it
sp5it's picture
Offline
Last seen: 13 hours 3 min ago
Joined: 12/25/2012 - 07:51
Posts: 1317
Location: Poland

Thank you freeme.
Mike

Think of how stupid the average person is, and realize half of them are stupider than that. George Carlin

 Anyone offended by my signature please fill Complaint Form. Thank you.

 If a lot of people listen to Slayer, the world would be a better place to live" - Tommy Wiseau

Sidney Stratton
Sidney Stratton's picture
Online
Last seen: 9 min 2 sec ago
Joined: 01/28/2018 - 22:59
Posts: 576
Location: Canuckistan
freeme wrote:

Lock has done a good job here>  http://budgetlightforum.com/node/68707


sp5it wrote:
Any review for people who can read Martin? I prefer to read review 1-2 minutes instead of wasting 21. Mike

Thanks Freeme.

fluke
Offline
Last seen: 1 month 1 week ago
Joined: 04/20/2018 - 13:58
Posts: 500
Location: London United Kingdom

Di_Joker wrote:
The brightness and heating graphs are great! I love this part of the review! LOL But why they do not offer the 18650 tube I do not understand. :FACEPALM:

 

Wowtac A6 legos.

NeutralFan
NeutralFan's picture
Offline
Last seen: 2 days 9 hours ago
Joined: 03/20/2014 - 19:22
Posts: 1422
Location: Wisconsin, USA

I enjoyed your video M4D M4X. You have a lot of nice flashlights! Shocked

I’d rather use my flashlight around the house than turn on the lights.

toddcshoe
toddcshoe's picture
Offline
Last seen: 11 hours 52 min ago
Joined: 01/24/2018 - 23:49
Posts: 2572
Location: Foley, MO

Ordered one in NW from Thrunite’s site. Looking forward to it. I have always had good luck with their lights.

Thanks for the review M4X.

"Everywhere I go, there I am"

Unheard
Unheard's picture
Online
Last seen: 2 min 47 sec ago
Joined: 01/16/2019 - 11:38
Posts: 2041
Location: Germany

Lots of lights have the problem that one cannot go up from moon to the next brighter mode. Jet-II pro is one, Folomov C2 is another. That’s why I still take the S1R with me when I have to travel and must take a room or so. The UI is hard to beat. Oh, the Jetbeam RRT01 does better of course, but it’s also bigger.

Smile, you cannot kill them all.

will34
will34's picture
Offline
Last seen: 19 hours 24 min ago
Joined: 12/18/2012 - 00:12
Posts: 3985

Impressive runtime and output stabilization for its size.

mbp
Offline
Last seen: 15 hours 51 min ago
Joined: 04/01/2019 - 11:00
Posts: 351
Location: Baltimore, MD

Very well made light, great runtime/output, extremely easy to carry. This could potentially be a Hall of Fame EDC light. However, the tint is maybe the worst I have ever seen at least on the neutral white.

chrisddo
Offline
Last seen: 2 hours 23 min ago
Joined: 06/30/2017 - 03:46
Posts: 57
Location: pasadena ca

Yes, even varying degrees of minus-green couldn’t really get it quite right for me…mostly because of the beam pattern and structure. Otherwise, I really like it outside of that.

will34
will34's picture
Offline
Last seen: 19 hours 24 min ago
Joined: 12/18/2012 - 00:12
Posts: 3985

Has anyone here done an emitter swap for the T1? By the looks of the driver it doesn’t seem to be a boost driver so I assume it uses a 3V XHP50.2, but maybe I’m wrong because the output graph does look like a boost driver behavior. I would hate the tint shift on the NW version and the green of the CW in lower modes. I have a unknown bin but very nice rosy tint XM-L2 emitter waiting to be used.

id30209
id30209's picture
Offline
Last seen: 3 hours 5 min ago
Joined: 05/17/2018 - 12:20
Posts: 1856
Location: Croatia

I think this is 6V emitter and driver must be boost.

Martin can you confirm?

WTB Titanium 4sevens 2xAA tube

Anthon
Offline
Last seen: 4 hours 47 min ago
Joined: 09/07/2015 - 10:33
Posts: 667

emiter runs at 12V

I did a XHP35 HI swap on mine but it lost a bunch of lumens so I got back to XHP50.2

M4D M4X
M4D M4X's picture
Offline
Last seen: 1 week 1 day ago
Joined: 03/19/2014 - 05:17
Posts: 8821
Location: Austria (GMT + 1)

correct -  its a 12V emitter

PLEASE NOTE
i do not work in "reviews, deals and codes" for the time being
maybe M4D M4X will return one day, but until then:

THANK YOU FOR YEARS OF YOUR SUPPORT AND FRIENDLY CONTACTS!

will34
will34's picture
Offline
Last seen: 19 hours 24 min ago
Joined: 12/18/2012 - 00:12
Posts: 3985

Wow that’s pretty odd for XHP50.2, but I guess they used a modified TC15 driver meant for XHP35.

The_Flashaholic
The_Flashaholic's picture
Offline
Last seen: 13 hours 10 min ago
Joined: 04/05/2017 - 12:46
Posts: 1172
Location: Wakefield

Tint is horrid and it struggles to hold Turbo like the TH01, just a shame most reviewers don’t mention it because of commission.

My 4K Lumen Whore Reviews (MS18, X70, MS12, DX80, X80-GT, X45vn etc) - http://www.youtube.com/c/FLASHAHOLIC_TV

Anthony Nguyenn
Anthony Nguyenn's picture
Offline
Last seen: 5 months 2 days ago
Joined: 06/23/2018 - 09:45
Posts: 125
Location: U.S.A

Flashaholics wrote:
Tint is horrid and it struggles to hold Turbo like the TH01, just a shame most reviewers don’t mention it because of commission.

Hey Flashaholic, I watch your review of it on youtube and love it.
Do you recommend the Neutral White instead of Cool white ? Does it has better color tint ? I really like the new Desert tan color of the T1.

Lumintop Tool AA 2.0 Nichia + CW| Lumintop Tool AAA | Lumintop EDC 18 6500k| Lumintop EDC 01| Convoy S2+ 7135*8 5000k | Convoy S2 UV Nichia |Massdrop Vega AA NW |BLF A6 NW | Nitecore Tube 2.0 | Sofirn SD 05 | Sofirn 01S 4000k| Klaurus G15 | Klarus HR1 Pro | Thrunite T10T v2 NW| Thrunite T1 Black + OD Green | Thrunite Ti3 CW+ NW| |Rovyvon A3x Nichia | Rovyvon A5x Cree | Rovyvon A23 Nichia | Wuben E19 Nichia | MecArmy SGN 6 | Wowtac BSS V4 | Wowtac W1 | Wowtac H01 | Ultratac A3N Nichia | Wurkkos FC11 |  Wurkkos WK30

Thrunite T2 |