Interested.
- 4500k-5700k tint
- And 10440 support.
-
No need for magnet and tritium hole. Make it as compact as possible pls.
Keep the pocket clip
Maukka tested limited samples from single lots that Clemence ordered, and Clemence seems like he has a good connection somewhere in Nichia’s distribution chain to be able to consistently source hard-to-find emitters. So what Maukka tested might tell us very little about the tints of whatever lots Sofirn might get.
I’d recommend people just figure out what color temperatures they want. Bare minimum, the E21A is available in a wide range of CCT’s with stellar CRI. I would be careful about assuming what the DUV will be.
That said, I think Ryzbor is correct that the highest output bins, like D240 at 5000K, are more likely to have an unfavorable tint versus the next output bin down.
2000k and 2700k for sure count me in.
If you can use C01R driver 3 modes
Interested
interested on 2700k-4000k.Atleast 2 modes.
Interested only with 3500 K.
I prefer two modes only.
I have used my Sofirb SF01A and C01S with 10440 and there have been not problems, sometimes but only a few seconds…
Very interested.
Very interest 2000k,please more recessed optic and add glass to protect optic from scratch
Definitely interested at 2700-3500k.
Would it be possible to use C01R driver with 3 modes?
Next I would love to buy C10E (the C10s with E21A)
+1
+1
+1
Interested in 4500K, and below, mostly below
Very interested, specially in a warm one, about 2700-3500K, but would buy on a cooler tint if warm isn’t available.
Edit: ¿Would it be possible to make it also with nichia optisolis LEDs?
Would also love an optisolis version!
2000K please
Ditto
Interested in 4500k. Moonlight. 10440 not necessary.
Same for me depending on price
Interested in one of each : 2000K, 3000K, 4500K, 6500K.
Preferably D220 flux bin and 2 modes.
I would prefer optisolis though.
Interested.
Interested in 4500K and below tints. Would also like 10440 support.
in for 3500k