Lumintop is very confusing
Flashlights
Brand flashlights: OLIGHT,NITECORE,LUMINTOP,MATEMINCO,CONVOY,IMALNET,NlightD,Weltool
Lumintop is very confusing
Is there any store to buy FW3A PURPLE with postage to europe ?
thx
Is there any store to buy FW3A PURPLE with postage to europe ?
thx
I would be surprised if there is.
That was a limited edition.
Maybe check one of the European eBay sites?
Hello, what is the minimum current the led driver gives?
Hello, what is the minimum current the led driver gives?
I measured 23 micro amps. So super low parasitic drain.
When the LED is on, it gets 0.0000023A?
When the LED is on, it gets 0.0000023A?
0.000023A, 23uA
Led off, parasitic drain.
You want to know the amp draw on moonlight?
I could not get the light to turn on with the tail switch removed. Maybe someone else was more successful than me.
Thx for answers!!
Yes on moonlight.
still looking any FW3A PURPLE store with postage to europe-anyone ?
Hello. Just bought one from lumintop. They made terrible engravings on body and tailcap Where can I buy clean one? Without any logos and engravings on body?
Hello. Just bought one from lumintop. They made terrible engravings on body and tailcap Where can I buy clean one? Without any logos and engravings on body?
Ouch. Do you have a picture of it? I think you are the first to note this.
I guess Neal still has clean ones, but I would ask him first.
Brand flashlights: OLIGHT,NITECORE,LUMINTOP,MATEMINCO,CONVOY,IMALNET,NlightD,Weltool
Roughly 18.5mA on moonlight, ramping mode, XPL HI 3A.
I get 24.4µA on standby.
imshara:Hello. Just bought one from lumintop. They made terrible engravings on body and tailcap Where can I buy clean one? Without any logos and engravings on body?
Ouch. Do you have a picture of it? I think you are the first to note this.
I guess Neal still has clean ones, but I would ask him first.
Of course. Full res: https://imgur.com/a/bFPe4Mu
Dissapointed…
While those are engravings (or printings), I would call them normal--not terrible.
If you want a flashlight without them, that's fine, but those are pretty normal for flashlights.
EDIT:
I just noticed that my two FW3As don't have the engravings/printings, so I see the problem.
By the way, I like the bunny, but I don't care for the printed text, though that's not really here nor there.
Thx a lot!!
While those are engravings (or printings), I would call them normal—not terrible.
If you want a flashlight without them, that’s fine, but those are pretty normal for flashlights.
Yes, it’s normal for regular flashlight, but not for this stylish product. FW3A has beautiful clean author’s design out of the box. No reason to trash it.
I agree with imshara. For this particular light the clean look is one of best “features”. Lumintop is allowed to change this of course, but it would have been nice if they would announce it first.
The Playboy-logo tail … I don’t like but not a dealbreaker.
The huge warning on the bezel … They totally ruined the clean look of the FW3A. Idiots.
Between this and the problems with FW1A reflectors I think trained monkeys would do a better job of running the company.
The Playboy-logo tail … I don’t like but not a dealbreaker.
That’s Lumintops logo, not the playboy bunny lol. I actually like the button, the rest of the engravings I can do without. Simple fix for the head bezel, just get a stainless one or this new style from JC Customs.
Crenelated stainless steel bezels with slots for the fw3 series of lights. These are a direct replacement for your stock bezel. Simply swap your glass and oring from you stock bezel over. (shown with Glow in the dark inserts which are not...
Price: USD 45.00
varbos:The Playboy-logo tail … I don’t like but not a dealbreaker.
That’s Lumintops logo, not the playboy bunny lol. I actually like the button, the rest of the engravings I can do without. Simple fix for the head bezel, just get a stainless one or this new style from JC Customs.
SS Crenelated Bezels for the fw3a/fw3s/fw3c/fw3t – JC CUSTOM FLASHLIGHTS
$45…
I’d go with stainless >$4