Received my package on August 6. Couldn’t decide on which color temp to buy, so I went with all four. Azhu was kind enough to reflow some onto a 16mm DTP star for a reasonable fee. Packaging was top notch!
Looking forward to getting these installed and testing them out in the near future. Not ready to do that just yet, some parts are still on order.
Thanks again!!
Lyyyyghtey
(Lyyyyghtey)
August 17, 2020, 5:46pm
435
Wow, I missed this awesome thread somehow!! Are there still 2700K, 3000K or 3500K available, as I still have enough 4000 and 4500 from Clemence’s GB.
Thank you!
azhu
(azhu)
August 17, 2020, 5:48pm
436
Lyyyyghtey:
Wow, I missed this awesome thread somehow!! Are there still 2700K, 3000K or 3500K available, as I still have enough 4000 and 4500 from Clemence’s GB.
Thank you!
Yup all flavors are still available. Unfortunately, I was never able to source the sw27 though. PM inbound.
ReManG
(ReManG)
August 17, 2020, 11:37pm
437
Pics
Bought some 3500K 219Bs and his last XPE2 660nm for an AA light I wanted to mod...
Swapped out the Ti3 emitter for the 3500K 219B, just about the perfect tint for me. Jet E10R had an XPLHi in CW, wanted a red emitter light and a little heat with a strap wrench gained me access to do the swap.
Fast shipping, super well done packaging and thanks again for these 'em otters again AZHU!
Lyyyyghtey
(Lyyyyghtey)
August 18, 2020, 5:34pm
438
Ok I would like
12 of the SW30
14 of the SW35
And the slow shipping option is fine.
Thank you!
azhu
(azhu)
August 19, 2020, 3:40pm
440
ReManG:
Pics
Bought some 3500K 219Bs and his last XPE2 660nm for an AA light I wanted to mod…
Swapped out the Ti3 emitter for the 3500K 219B, just about the perfect tint for me. Jet E10R had an XPLHi in CW, wanted a red emitter light and a little heat with a strap wrench gained me access to do the swap.
Fast shipping, super well done packaging and thanks again for these ’em otters again AZHU!
Glad you like the emitters! That red on the Jet E10R looks awesome.
Unheard
(Unheard)
August 27, 2020, 3:55pm
441
Got some sw30 and sw35 LEDs from Azhu. Shipping was superfast
The sw35 reminds me on Nichias E21A with a slight red corona around the hotspot. Shown is a Mi1C with sw35 (left) and the C2 with a 3000K E21A:
I have no target for the sw30 currently, maybe it’s time for some new Sofirn C01S
azhu
(azhu)
August 27, 2020, 4:00pm
442
Unheard:
Got some sw30 and sw35 LEDs from Azhu. Shipping was superfast :+1:
The sw35 reminds me on Nichias E21A with a slight red corona around the hotspot. Shown is a Mi1C with sw35 (left) and the C2 with a 3000K E21A:
I have no target for the sw30 currently, maybe it’s time for some new Sofirn C01S :person_facepalming:
Thanks for sharing. The slight red/rosy from the sw35 does look really good in this photo.
The C2 might be a little bright for a fair comparison but it could also just be the beam profile.
Unheard
(Unheard)
August 27, 2020, 4:14pm
443
Difficult to find similar modes. But yes, the C2 has more juice than the Klarus, even with its original 219C.
The beams of both lights are lovely.
rhemz
(rhemz)
September 9, 2020, 5:34pm
445
Interested in 4x sw45k and 2x sw35
azhu
(azhu)
September 21, 2020, 5:59am
447
UPDATE: sw30 is low in stock. If you need some, pm me soon before it’s out.
azhu
(azhu)
October 15, 2020, 3:54pm
448
UPDATE: sw30 is now SOLD OUT
nocturne
(nocturne)
October 15, 2020, 4:50pm
449
Won’t Nichia make more?!? :’(
Thanks for hooking us up, azhu!
I would like to order 8 sw45k. I will pm for shipping and payment details.
benjamins
(benjamins)
October 20, 2020, 10:36am
451
It took 16 days for the ordered LEDs to arrive in Europe, very satisfied!
Wish me luck, I’ll need it reflowing them
azhu
(azhu)
October 23, 2020, 6:04pm
452
benjamins:
It took 16 days for the ordered LEDs to arrive in Europe, very satisfied!
Wish me luck, I’ll need it reflowing them
Good luck! Once you get the hang of things, it’s not too bad.
Dsvist12
(Dsvist12)
October 26, 2020, 10:31pm
453
Hello! Can these be put onto a LUME1 board for an FW3A?
I’ve never done reflowing so I’ll need to find someone on Reddit or here and pay them along with sending the parts over too.
I currently have an FW3A with 219b Sw45 from a Reddit user and want another in stainless steel.