I was surprised to see that 26350 tubes for Emisar D4S and D4SV2 were shown as available in all colors. I emailed Hank and he confirmed that green and cyan were really in stock.
I will finally have a 26350 tube for my green Emisar D4S that I purchased a year and a half ago, before 26350 tubes were available.
Can you get Osram KY CSLNM1.FY (yellow) emitter for Noctigon K1? As there is already green and red variant, I think, yellow is at least that useful, if not more (I would love one in my hands, to be honest).
Hank, do you still offer custom built lights with SST20-DR in 670nm deep red wavelength? Someone reported that you were able to source a chromaticity bin with 670nm instead of 660nm (the more common wavelength available). Thank you!
I am SO GLAD I haven’t bought the K1 yet, because now I’m going to! I’ve been scanning everywhere for a Green Emisar/ Noctigon… anything. I missed my opp with not ordering the green d4sv2 when I first started this hobby and didn’t realize they’d run out and never return. HANK- thank you! Amazing look on both the d4 and K1. Here goes another 2 bills..
Hank, do you still offer custom built lights with SST20-DR in 670nm deep red wavelength? Someone reported that you were able to source a chromaticity bin with 670nm instead of 660nm (the more common wavelength available). Thank you!
Just ordered a green K1 with the XHP35HI 4000K.
Should look good next to my dark gray K1 with the W1 (Osram CSLNM1.TG), 6000K, and my black K1 with XP-L HI V2 5D
Just ordered a green K1 with the XHP35HI 4000K.
Should look good next to my dark gray K1 with the W1 (Osram CSLNM1.TG), 6000K, and my black K1 with XP-L HI V2 5D
I’ve been resisting the urge to get a K1 with XHP35HI but think the green version may have given me the final push
Did I read somewhere that Hank was getting LH351D 5000k 90CRI? I don’t see it as an option for anything. Would definitely pick up a 4th KR4 with that if the bin is nice. 4000k would be even better. I really like the Samsung LED in a nice tint bin.
Just ordered a green K1 with the XHP35HI 4000K.
Should look good next to my dark gray K1 with the W1 (Osram CSLNM1.TG), 6000K, and my black K1 with XP-L HI V2 5D
I’ve been resisting the urge to get a K1 with XHP35HI but think the green version may have given me the final push
Look forward to seeing your comparisons
Yes that green is pushing me over the edge soon. No idea about what led I should get with that. Osram or good old XHP35 HI. Hating Osrams tint, but it gave more throw, about how much?
The intl-outdoor website indicates 2000K is with R9050 for E21A. I don’t remember if anybody has done the actual measurement. If I find it, I will report back.
I have got a question related to E21A, too. I have KR4 with E21A/5000K. Does somebody have a picture of the driver for KR4 with E21A? I understand that the driver is the one with 5A max, unique to this LED. I would like to see how it looks like.
Can you get Osram KY CSLNM1.FY (yellow) emitter for Noctigon K1? As there is already green and red variant, I think, yellow is at least that useful, if not more (I would love one in my hands, to be honest).
The intl-outdoor website indicates 2000K is with R9050 for E21A. I don’t remember if anybody has done the actual measurement. If I find it, I will report back.
I have got a question related to E21A, too. I have KR4 with E21A/5000K. Does somebody have a picture of the driver for KR4 with E21A? I understand that the driver is the one with 5A max, unique to this LED. I would like to see how it looks like.
Thanks.
I think the limitation of 5A it comes from the Anduril special firmware (no fet) and not from the driver.
I’d say so, I sent my first one back to Hank because of rough threads and a blemish on the copper
I have an ore1 of the second batch and it’s not having markings . You ‘re having an exclusive one .
Caught a sickness . I found out i'm not alone .
p12gt, tn12v4, s1, tk15, s2+, l8, pd35tac, fd65, tk35 ue 2018, d4v2, kr4, kr1, d4sv2, fw3a, x9l, sp31v2.0, sp32av2.0, sp36blf, sp40, lt1, sp31uv, sc31pro, sc21, hs05, hs10, e07, e07x, tk18, pt40
Is it possible to get the flashing kit for $8.5 with a light? When I tried it was $14.5.
Here’s your picture :
https://intl-outdoor.com/emisar-d4s-26350-tube.html
I was surprised to see that 26350 tubes for Emisar D4S and D4SV2 were shown as available in all colors. I emailed Hank and he confirmed that green and cyan were really in stock.
I will finally have a 26350 tube for my green Emisar D4S that I purchased a year and a half ago, before 26350 tubes were available.
Noctigon K1, all colors back, including green version, 35HI version restocked.
D4V2 cyan version available,
https://intl-outdoor.com, Noctigon, Emisar, flashlight components.
When will be a new 21700 light?
I dream with a KR4 with the shape of the KR1 but using the D4S TIR lens and 21700 cell
The Cyan D4 is beautiful
I’m thinking about grabbing a cyan D4V2 with E21a and the 18500 tube, a first for me.
Is 3.8 amps from a Panasonic 18500 enough for E21a to do it’s best?
Is there a trustworthy review for that 18500 battery?
Test/review of Vapcell INR18500 2200mAh L22 (Gold) 2020
http://budgetlightforum.com/node/73065
Based on the review, this Vapcell 18500 would be good enough for E21A to perform at its best.
Thanks again!
Hello Hank,
Can you get Osram KY CSLNM1.FY (yellow) emitter for Noctigon K1? As there is already green and red variant, I think, yellow is at least that useful, if not more (I would love one in my hands, to be honest).
Green KR1 next?
You can choose black, grey, or sand color 18500 tube.
https://intl-outdoor.com, Noctigon, Emisar, flashlight components.
Hank, do you still offer custom built lights with SST20-DR in 670nm deep red wavelength? Someone reported that you were able to source a chromaticity bin with 670nm instead of 660nm (the more common wavelength available). Thank you!
^ yes please!!
[FLF] Five Light Friday https://budgetlightforum.com/node/78749
Check out some of my new lights (picture heavy) and quick first impressions of them here: https://budgetlightforum.com/node/77180
My Sft40 beamshots / comparison thread: https://budgetlightforum.com/node/78100
The BLF GT with SFT40 (2300lm, 2700m+ @ 30 seconds!)
https://budgetlightforum.com/node/79561
I am SO GLAD I haven’t bought the K1 yet, because now I’m going to! I’ve been scanning everywhere for a Green Emisar/ Noctigon… anything. I missed my opp with not ordering the green d4sv2 when I first started this hobby and didn’t realize they’d run out and never return. HANK- thank you! Amazing look on both the d4 and K1. Here goes another 2 bills..
[FLF] Five Light Friday https://budgetlightforum.com/node/78749
Check out some of my new lights (picture heavy) and quick first impressions of them here: https://budgetlightforum.com/node/77180
My Sft40 beamshots / comparison thread: https://budgetlightforum.com/node/78100
The BLF GT with SFT40 (2300lm, 2700m+ @ 30 seconds!)
https://budgetlightforum.com/node/79561
Hank. PM sent about flashing kit with flashlight.
http://budgetlightforum.com/comment/1687803#comment-1687803
Once Hank received them, it turned out that they were actually SST-20-DR-B120-V660 Flux:X Voltage:V6 Color:D5. D5 is the 660nm-665nm chromaticity bin.
That’s still a higher peak wavelength bin than C01R XP-E2 Photo Red with P3 bin, which is the 655nm-660nm chromaticity bin.
http://budgetlightforum.com/comment/1660117#comment-1660117
That’s fine, Hank. I don’t actually need it. Not a big deal at all.
I’ll just take the 18350 tube. Easier to find good batteries for it anyway.
Just ordered a green K1 with the XHP35HI 4000K.
Should look good next to my dark gray K1 with the W1 (Osram CSLNM1.TG), 6000K, and my black K1 with XP-L HI V2 5D
I would definitely buy one!
Day one purchase.
I’ve been resisting the urge to get a K1 with XHP35HI but think the green version may have given me the final push
Look forward to seeing your comparisons
Did I read somewhere that Hank was getting LH351D 5000k 90CRI? I don’t see it as an option for anything. Would definitely pick up a 4th KR4 with that if the bin is nice. 4000k would be even better. I really like the Samsung LED in a nice tint bin.
From intl-outdoor.com :
W1 (Osram CSLNM1.TG): 900lm, Lux : 650Kcd (650,000cd)
W2 (Osram CSLPM1.TG): 1400lm, Lux: 550Kcd (550,000cd)
XHP35 HI 6500K/5000K: 2000lm, Lux: 290Kcd (290,000cd)
XHP35 HI 4000K/3000K: 1800lm, Lux: 270Kcd (270,000cd)
SBT90.2 LED, 5700K, 4500lm, Lux: 420Kcd (420,000cd)
And from people more knowledgeable than me on BLF, it seems Hank’s #‘s are to be trusted.
[FLF] Five Light Friday https://budgetlightforum.com/node/78749
Check out some of my new lights (picture heavy) and quick first impressions of them here: https://budgetlightforum.com/node/77180
My Sft40 beamshots / comparison thread: https://budgetlightforum.com/node/78100
The BLF GT with SFT40 (2300lm, 2700m+ @ 30 seconds!)
https://budgetlightforum.com/node/79561
Has anyone measured the CRI of Hank’s 2000k? Just curious if it’s R9080 like Clemence’s batch was.
The intl-outdoor website indicates 2000K is with R9050 for E21A. I don’t remember if anybody has done the actual measurement. If I find it, I will report back.
I have got a question related to E21A, too. I have KR4 with E21A/5000K. Does somebody have a picture of the driver for KR4 with E21A? I understand that the driver is the one with 5A max, unique to this LED. I would like to see how it looks like.
Thanks.
package label for the 2000K and 2700K version.
https://intl-outdoor.com, Noctigon, Emisar, flashlight components.
Yes, just added this option for K1 and KR1.
https://intl-outdoor.com, Noctigon, Emisar, flashlight components.
I think the limitation of 5A it comes from the Anduril special firmware (no fet) and not from the driver.
Pages