Need zanflare F2 switches

5 posts / 0 new
Last post
bikenber73
bikenber73's picture
Offline
Last seen: 2 days 22 hours ago
Joined: 11/12/2011 - 15:09
Posts: 2161
Location: Maryland USA
Need zanflare F2 switches

I have two that have failed now.
Can anyone link me to some good replacements?
I tried and ordered what I thought would work but they didn’t fit correctly.

Thanks

MascaratumB
MascaratumB's picture
Offline
Last seen: 1 hour 36 min ago
Joined: 10/29/2016 - 12:12
Posts: 6873
Location: Portugal

Your problem is with the switch or the PCB?

I was looking to the switch of my F1 (not sure if identical to the F2) and it is similar to a Omten switch, like those used in Convoys.
The PCB is samller in diamter though

bikenber73
bikenber73's picture
Offline
Last seen: 2 days 22 hours ago
Joined: 11/12/2011 - 15:09
Posts: 2161
Location: Maryland USA

Its the switch. I can use a paperclip to test, turn it on and cycle through the modes.

Thanks

MascaratumB
MascaratumB's picture
Offline
Last seen: 1 hour 36 min ago
Joined: 10/29/2016 - 12:12
Posts: 6873
Location: Portugal

Well, if they are similar to the one in the F1, I guess these will serve: https://www.aliexpress.com/item/32685050264.html?spm=2114.12010612.81483...

Here is my disassembling of the F1, where you can see the switch, down, in the red board:

bikenber73
bikenber73's picture
Offline
Last seen: 2 days 22 hours ago
Joined: 11/12/2011 - 15:09
Posts: 2161
Location: Maryland USA

thanks