Agreed. 
I wish Cree (or the new owner) would offer more XP-L HI in warmer (and HighCRI) tints but lately XP-L HI 4.000K are very difficult to get.
Cree seems to be falling out of the innovation race. If I were them, I would also develop the corresponding HI (high intensity) variants for their XHP50.2 and XHP70.2 - and try to do something with the ugly rainbow beam.
XP-L HI warm high CRI emitters are treasure on their own kind.
Interested. In for one if it comes about
Reflectors sucks. What about TIR optics?
d25 uses tiny reflectors around 10 –12 mm, i have not seen any single round tir of those sizes. stock reflectors however are fine when led used is a right one, my d25 came with LB leds and had a nasty beam with a center hole. i swapped them for xpg3, and beam changed completely. no more holes.
to answer op question, i’d be interested in 2 at least, any nw led is fine, , and around 620nm red, no deep reds, i build several lights with DR, not as good as regular red, harder to see,
I would be in for a couple! Especially with 4000K and 2700k options!
Needs a different 4 channel driver and a different MCPCB as well as more soldering to be done correctly to get each channel correct…
+1
interested
At that price put me down for one 2700k and one 4000k, both with battery.
I’ll buy one for that price.
Mee too….I would like a headlamp with warm tint.
I’m in at that price. I’d prefer if it has no memory though
In
interested
In 2700k 3000k max
14500/AA version, High Cri warm Led + red 670nm
Flood beam but including different size degree Tir lens
Sublumen mode 0,1 LM
I’m interested if it’s 4000k + 660nm. 300 lumens is enough for a general purpose headlamp, especially indoors.
interested
Yes please!