E21A 2700K, 2000K back in stock.

2729 posts / 0 new
Last post
G.P.
G.P.'s picture
Offline
Last seen: 2 days 23 hours ago
Joined: 11/11/2018 - 12:49
Posts: 96
Location: Canada

Jasetaylor wrote:
The website appears to be down – https://intl-outdoor.com

_SUSPENDED _

_This website has been suspended.

Please contact the technical support department._

I’m hoping it’s nothing serious, relating to the CCP.

https://www.noctigon.com is still up.

Working fine for me, although I did have that happen to me about a week ago.

Jasetaylor
Jasetaylor's picture
Offline
Last seen: 1 day 3 hours ago
Joined: 10/16/2020 - 05:29
Posts: 121
Location: West Sussex
TimMc wrote:
The website seems ok to me.

Wondering if it’s blocked in UK or you’re cached?!?!?

oweban
oweban's picture
Offline
Last seen: 3 days 3 hours ago
Joined: 02/12/2019 - 06:34
Posts: 1251
Location: Sydney AU

I seem to get that every now and then. Along with lights disappearing from the LED Flashlights page and coming back a day later Wink

TimMc
TimMc's picture
Offline
Last seen: 3 hours 56 min ago
Joined: 06/26/2020 - 02:22
Posts: 474
Location: Melbourne, Australia

G.P. wrote:
I just noticed that there are different colors of LEDs available for the backlight on the switch. Does anybody have any pics? Would love to see the red…

https://www.reddit.com/r/flashlight/comments/hzep4o/d4v2_custom_button_c...
Illini_2000 wrote:
Cool White, Purple, Green, Cyan, Amber, Warm White, Red

They might look like this?

niajef
Offline
Last seen: 6 hours 44 min ago
Joined: 10/18/2020 - 18:23
Posts: 779
Location: Toronto
Jasetaylor wrote:

The website appears to be down – https://intl-outdoor.com


 


SUSPENDED


This website has been suspended.


Please contact the technical support department.


 


https://www.noctigon.com is still up.

works for me too…maybe hank banned you Wink

TimMc
TimMc's picture
Offline
Last seen: 3 hours 56 min ago
Joined: 06/26/2020 - 02:22
Posts: 474
Location: Melbourne, Australia

Last time the site was suspended for others it worked for me on my phone but I also got the “Suspended” message when I tried a different Internet connection. It seems work fine on different connections now though…

Casemods
Casemods's picture
Offline
Last seen: 2 days 21 hours ago
Joined: 07/25/2020 - 13:40
Posts: 13
Location: East bAy

What’s the best setup for the copper d4v2? I have the yellow d4v2 with 4500k and raised button edge and silver bezel. Love it.

Does the copper also have the same aux led options?

Any pics of the button light?

Fw3a, d4v2, k1, e01, s2r cu, s2+ cu sr, s2+ sand sr, c8.

East bAy area, California

Artiet59
Online
Last seen: 13 min 32 sec ago
Joined: 02/25/2020 - 17:55
Posts: 995
Location: CT, USA

justanotherguy wrote:
This hank guy is going to cost me my marriage

dude.. i couldn’t relate more! I just bought my first d4v2 in brass with osram w2.. cost me $100. that was 3 weeks ago and now im probably buying the copper. and if Hank ever comes out with kr4 brass and copper i’m definitely buying one of those. And i am buying the k1 in green body. and i already have 5 emisar / noctigon lights. Hank is KILLING ME
Artiet59
Online
Last seen: 13 min 32 sec ago
Joined: 02/25/2020 - 17:55
Posts: 995
Location: CT, USA

KyleGates wrote:
If we ask nicely can we get the KR4 in all brass and all copper?

^ Hank, PLEASE do KR4 in copper. Please. KR4 is my favorite light i own of many. Not that i need another light but id buy it.
Frostcream
Offline
Last seen: 1 day 11 hours ago
Joined: 05/26/2020 - 16:26
Posts: 95

Artiet59 wrote:
Hank is KILLING ME
I just snagged a 5th D18 because…well, deep red emitters.

Hank’s business is a masterwork of healthy addiction creation.

lightdecay
Offline
Last seen: 2 months 2 days ago
Joined: 06/17/2019 - 08:55
Posts: 421
Location: U.S.A.

If we ask nicely can we get the D4V2 in green?

TimMc
TimMc's picture
Offline
Last seen: 3 hours 56 min ago
Joined: 06/26/2020 - 02:22
Posts: 474
Location: Melbourne, Australia
lightdecay wrote:
If we ask nicely can we get the D4V2 in green?

Green emitter or tube?

lightdecay
Offline
Last seen: 2 months 2 days ago
Joined: 06/17/2019 - 08:55
Posts: 421
Location: U.S.A.

Green anodization, like Noctigon K1 or Emisar D4SV2.

Emisar D4 with green anodization was my favorite.
http://toykeeper.net/torches/emisar-d4/full/d4-and-18350-tube.jpg

TimMc
TimMc's picture
Offline
Last seen: 3 hours 56 min ago
Joined: 06/26/2020 - 02:22
Posts: 474
Location: Melbourne, Australia
lightdecay wrote:
Green anodization, like Noctigon K1 or Emisar D4SV2.

+ green switch and KP CSLNM1.F1 LEDs to be completely green Big Smile

lightdecay
Offline
Last seen: 2 months 2 days ago
Joined: 06/17/2019 - 08:55
Posts: 421
Location: U.S.A.

That’s a phosphor-converted green led: it looks green, but you can still see other colors.

If you really want to go all-in on green, I recommend XP-E2 Green 520nm with the 7.5A CC driver.

I wanted a monochromatic green led, so in my last Hank order I got a custom D4V2 with it. It is less powerful, but I like the green color a lot more.

TimMc
TimMc's picture
Offline
Last seen: 3 hours 56 min ago
Joined: 06/26/2020 - 02:22
Posts: 474
Location: Melbourne, Australia
lightdecay wrote:
If you really want to go all-in on green, I recommend XP-E2 Green 520nm with the 7.5A CC driver.

Oh, thanks! I was wondering why I could see other colours when I put a KP CSLNM1.F1 in my Lumintop Tool AA 2.0. I need to get a preheat platform and redo it (damaged the LED slightly when using a heatgun from a hardware store to reflow). I’ll have a look for XP-E2 green emitters… I haven’t looked into custom drivers yet. The Tool AA 2.0 would probably get too hot beyond 3A.

lightdecay
Offline
Last seen: 2 months 2 days ago
Joined: 06/17/2019 - 08:55
Posts: 421
Location: U.S.A.

My post was ambiguous.

I recommended XP-E2 Green 520nm with the 7.5A CC driver, but I didn’t mean a custom driver, I just meant Emisar D4V2 or Noctigon KR4 with Hank’s 5A or 7.5A constant current driver.

XP-E2 Green 520nm does not need more than 1.5A to perform at its best, in fact 5A CC driver is probably enough for a quad: 1.25A for each led.
https://budgetlightforum.com/node/32452

TimMc
TimMc's picture
Offline
Last seen: 3 hours 56 min ago
Joined: 06/26/2020 - 02:22
Posts: 474
Location: Melbourne, Australia
lightdecay wrote:
XP-E2 Green 520nm does not need more than 1.5A to perform at its best

I’ll try to swap the CSLNM1.F1 with an XP-E2 green on the Tool AA 2.0 to see what it looks like. Big Smile

https://www.youtube.com/watch?v=K5vsjwZITpw

TimMc
TimMc's picture
Offline
Last seen: 3 hours 56 min ago
Joined: 06/26/2020 - 02:22
Posts: 474
Location: Melbourne, Australia

D4V2 sand arrived in Sydney this morning! Hopefully it’ll arrive in Melbourne soon. Excited! Love

Tater Tot
Offline
Last seen: 4 hours 19 min ago
Joined: 11/11/2019 - 23:51
Posts: 62

Hank, your website is down because of bunch of people from front page of reddit is visiting your website.

Link to the post

TimMc
TimMc's picture
Offline
Last seen: 3 hours 56 min ago
Joined: 06/26/2020 - 02:22
Posts: 474
Location: Melbourne, Australia
Tater Tot wrote:
people from front page of reddit

r/flashlight Innocent

JaredM
JaredM's picture
Offline
Last seen: 3 hours 50 min ago
Joined: 10/31/2011 - 13:33
Posts: 1475
Location: Pittsburgh, Pennsylvania

The “wait, there’s are people obsessed with flashlights ?! lol “ type comments crack me up. If they only knew…

niajef
Offline
Last seen: 6 hours 44 min ago
Joined: 10/18/2020 - 18:23
Posts: 779
Location: Toronto

its up now, but it is still SUPER slow, i even got “suspended”, i wonder how many orders hank got last night

TimMc
TimMc's picture
Offline
Last seen: 3 hours 56 min ago
Joined: 06/26/2020 - 02:22
Posts: 474
Location: Melbourne, Australia
JaredM wrote:
The “wait, there’s are people obsessed with flashlights ?! lol “ type comments crack me up. If they only knew…

It’s more of a practica… that is to say, each flashlight has a purpo… I have 20+ flashlights becau… Facepalm I like flashlights.

TimMc
TimMc's picture
Offline
Last seen: 3 hours 56 min ago
Joined: 06/26/2020 - 02:22
Posts: 474
Location: Melbourne, Australia

Any recommendations for a K1 configuration? Innocent

niajef
Offline
Last seen: 6 hours 44 min ago
Joined: 10/18/2020 - 18:23
Posts: 779
Location: Toronto
TimMc wrote:
JaredM wrote:
The “wait, there’s are people obsessed with flashlights ?! lol “ type comments crack me up. If they only knew…

It’s more of a practica… that is to say, each flashlight has a purpo… I have 20+ flashlights becau… Facepalm I like flashlights.

i can think of at least 10 different purposes to get 10 different lights.

1. general purpose flood light around the house
2. general purpose thrower light with good spill for walking the dog
3. lantern for power outage
4. flood headlamp for housework
5. thrower headlamp for hiking
6. keychain light on keychain for outside
7. keychain light for nightstand because obv ur not gonna get ur keys first to get up and go to the washroom at night
8. uv light for travelling, checking hotel bedsheet and maybe counterfeit money and stuff
9. edc, self explanatory
10. dedicated thrower light for fun, self defense, and guiding uber eats driver

these are all very useful and easily justifiable reasons.

now of course some of these can be combined into one ljght, but…why do that to yourself? Wink

TimMc
TimMc's picture
Offline
Last seen: 3 hours 56 min ago
Joined: 06/26/2020 - 02:22
Posts: 474
Location: Melbourne, Australia

I think I need a general purpose K1 thrower and a headlamp thrower next…

niajef
Offline
Last seen: 6 hours 44 min ago
Joined: 10/18/2020 - 18:23
Posts: 779
Location: Toronto

ya this is my plan

1. sp36
2. ft03
3. lt1
4. havent found yet
5. havent found yet
6. a3 pro
7. e3a
8. havent looked into yet
9. m300
10. k1

4 and 5 i can technically get hm65r to satisfy both, but its kinda expensive…
and 8, i can get another rovyvon, but i rather not have any overlaps.

TimMc
TimMc's picture
Offline
Last seen: 3 hours 56 min ago
Joined: 06/26/2020 - 02:22
Posts: 474
Location: Melbourne, Australia

1. D4V2 Innocent

niajef
Offline
Last seen: 6 hours 44 min ago
Joined: 10/18/2020 - 18:23
Posts: 779
Location: Toronto
TimMc wrote:
1. D4V2 Innocent

im on a budget lol

Pages