People like to tell what they got, and people like to know what others got. For the fun of it. And to justify our addictions of course.
Nice picture, nice light, nice LED choice. Enjoy :+1:
The 5D is my potential excuse to buy another D4V2, for sure again with SS bezel.
OT: I got a new kick pad for my e-set along with a double bass pedal. Now I have to learn playing it :laughing:
I received a Fireflies E07 today and the quality………isn’t good.
More to follow later…….
That looks extremely warm for 4000K, warmer than my 7A XM-L2 even. Is it the camera white balance?
Look at the picture again, the main LEDs are not turned on.
I can never tell with these optics :confounded:
it’s the green and red LEDs turned on on the sides, the main LEDs in the optics are off.
cheers for the morning lol 
I usually increase the warmth by 20 when taking photos to help make it reflect reality on my monitor and phone. But, yes. That’s the auxiliary LED. 
This reflector has a funny shape…
Finally!!
30,50€, shipped from Spain during the 11.11 sale!
Arrived yesterday and finally I can measure what my “hot rods” eat from the batteries 
.
Nice :+1:
Looking fwd to see some testing :sunglasses:
Careful though, I already burned a finger holding a wire on a MT09R
Ahah, been there, done that too I used a piece of rubber around the finger to press the thick wire against the cell negative, otherwise it would buuurn!! I still felt some heat :smiling_imp:
Some testing?
Well, so far:
- Amutorch VG10 quad w/ 4xLuxeon V 4000K + FET driver with Bistro HD OTSM (from Lexel, springs not bypassed)+ Sony VTC6 = 21.60A
- Convoy S6 triple w/ 4xLuxeon V 4000K + FET driver with Bistro HD OTSM (from Lexel, springs bypassed) + Sony VTC6 = 21.50A
So far, so good
To make the measurement I went to a local store and bought a 4mm multiwire copper cable, being the inner “wires”/strands thicker than AWG cables. I cut it short, to avoid resistance and bent it to help on measurements.
Acebeam L18. Charging the battery. No comments for now.
Cheers.
Acebeam E10. The 26650 adapter from the Little Fatty doesn’t work.
Which is really not necessary. The Osram is battery friendly.
Besides, the feel doesn’t need an extension.
They apparently made a mistake and sent it with battery.
I laughed when I saw the labels for Lithium.
The joke was on me. Good joke for 40 bucks.
I didn’t need the battery, since I bought 10 from Fasttech.
Before there was a 26350 light. The don’t have the lavender anymore.
I wanted to bust some lights with the high voltage of 2 26350.
And bust I did. I’m happy.
Bring good memories when I busted xenon
and weak LEDs with 2 or 4 16340s.
Well I’m off topic, I know.
Back to the E10.
It feels like an Acebeam all the way.
I’ll say is good for 500+ meters easy.
According to my measurements with the car in the street.
I fire ’em up from my dock at the canal.
So nobody knows who is the asrsole pissing them off.
At the end, I’m happy. The application is vague.
It’s good for someone with many lights.
Cheers.
A new line for every sentence, looks like a piece of poetry
Too bad it’s not a Haiku-lite.
I see what you did there