MF01 Mini / MT07- Mod/Upgrade - Copper Heatsink Cover Plate

EU group buy heatsinks and stickers got delivered:
PM sent to pfuender, Sikarisnagari, fucx and Capt Joe.
Please check your messages.

PS: i just did the swap on my two lights and it went smoothly. The tricky part was to handle and apply the stickers, but overall it took just a few minutes.

If you ask, the large round sticker goes on the battery side and the small semi circular one on the driver side, in a cavity with the same shape. When reassembling, make sure this cavity is over the three or four components that are not 7135 chips. It is quite obvious when you look at the driver.

Thanks for the update, patmurris!

Friends! Please tell me, does it make sense to change the brass plate to copper? I got 2 lights, but they already have a brass one installed.

Agreed, and even if you wanted copper, they’re no longer available unless someone organizes another batch to be made.

All EU group buy heat sinks have been mailed.

BTW: i did not apply any thermal paste when installing the copper heat sinks on my lights…

Should any be applied and where?

It is recommended to do so. Check about halfway down the first post. There’s a description and some pictures.

Interested in 2 please. regards jon

Sorry… long gone. If enough people express interest again, I may be able to organize another batch. We’d need another 15+ pieces of demand.

Thanks for the reply. look forward to seeing a new batch :slight_smile:

All EU GB heat sinks have been delivered.

Awesome. Thanks again for arranging the EU shipments, patmurris!

I know I`m tardy to the party but if there`s another list going for those interested I`d be down for 2.

And 1 here even if the shipping will be ridiculous. Has anyone tried to get the brass plate from Mateminco? Sorry if this has already been covered in the thread.

Interested in two (London)

Ok, at this point I think there’s been at least 7 pieces requested. Maybe I need to check into doing another batch. Let me check on pricing again.

Hello!

I’m also interested in two.

Edit: I received my Mateminco and there was a heatsink already mounted. So i do not need it anymore.

Ok, just keep in mind that shipping from the US is like $13-14. Last time I did this, a member in the EU volunteered to receive a bulk shipment and split it out to reduce shipping costs. Maybe something like that can be arranged again.

I’m pretty sure I’ll do another batch so if anyone is interested and hasn’t spoken up yet, please do so now so I can order the correct amount.

I just checked with the place I ordered these from before and now the price is almost double. :weary: I sent the design to a couple more places for quoting.

Thanks for the update and running around :+1: