-BLF A6 in Copper or Brass Group Buy Interest list- *CANCELED*

Any updates to the clip?

In for 1 of each in XP-L neutral white. Are these going to include the 18350 tube like the original?

No updates as of yet, but Neal is looking for another one.

No, as of now, no 18350 tube, will check with Neal to confirm. 18350 tube will be available as an add on, will get the price and update the OP

I’m in for a pair

Me too … I’m in for a pair.

Interested in 1 of each

interested in the copper

In for one of each if clip will be upgraded.

Nice idea this. Might be tempted by a brass one (SST-20 4000k).

Shame about the tailcap switch though. I HATE the ones that light up. And covering it with a black cover isn’t really an answer IMO.

Would have been nice to see something like an XHP50/SST-40 in there too.

I like the idea and the price is good, but it is not the ultimate light for me to want in copper or brass. I think sticking to the BLF-A6 driver is a good idea, still one of the nicest trouble-free drivers around with still a fine user interface.

I only hope that they did their job fine-tuning the bleeder- and tail-led resistors so that the user interface is not disrupted and the parasitic drain is not too much.

In for one copper nw sst20 4k if from the famous FA bin, nw xpl if it’s 5d.

Interested in 1 of each

I’m interested in a Brass A6, but only if an 18350 tube is available as well.

Interested in 1 of each at least.

Interested in a copper one.

Until Neal sorts out his customer service issues I’m firmly out despite the temptation.

Interested in 1 of each.
Thanks

Single SST-20 and FET driver doesn’t sound like a good match… Or maybe there’s different type of driver for SST?

I’m in for a copper one. SST 20 4000k :+1:
Only if NOT from NG :frowning: