What’s the difference between the S12A case and the S800 case? Ideally I’d like to get an RD6018 (or 24 when it’s released) in the smaller case like the S12D, as my desk isn’t very deep, and I’d be using an external power brick. Realistically all I’m really after is ~80W (4V 20A), coming from an old Dell laptop 130W power pack. Or would the DPS5020 be a better bet? I just like the form factor and extra control of the RD models more
very good, thank you so much for your support
hope you like it and tell your more friends
Dear friends:
The Spring Festival is approaching, and express delivery will be suspended from February 4th to February 18th. During this time, the orders will be accepted but not be shipped! From February 19th , these orders will be shipped according to the date of the order, sorry for any inconvenience caused to you.
https://rdtech.aliexpress.com/store/923042
Hello RD TECH!
I have a RD6018W and I was wondering about the maximum input voltage.
The datasheet says 70V max input, but I tried and it can take 71V.
Can I go even higher?? What would happen at 75V input (no load)??
My PSU drops 10V when under 600W load so if I would set it at 75V at no load it would be 65V under load, so I could still use the full 60V.
Please advise.
Hi friend
thank you for your support
but our limit is 70v, you can’t let it over 70V, we don’t allow
Yes you can. I’ve tested it! For everyone who is interested, there is a software limit of 72V input! It wont let you use the device above 72V.
Was that so hard to write down RD Tech?