FW3A COLORS! (TK edition added)

[ArtieT59]

@M4D M4X

Neal will speak with the manufacturer which colors can be made (based on the votes until before monday)

when thats finished all people on the list will get more info.

Thanks Max!

[Unheard]

What was the max number of votes for the purple 18350 before Monday (USA?)

[M4D_M4X]

@Unheard

What was the max number of votes for the purple 18350 before Monday (USA?)

below 100...

and its Austria time btw ;)

[Chatika_vas_Paus]

Still curious about it.

@Chatika vas Paus

Will this be printed on the bezel?

[Brawny]

@Chatika vas Paus

Still curious about it.

@Chatika vas Paus

Will this be printed on the bezel?

Is it true, is it kind, is it necessary?

[M4D_M4X]

Neal said there will be no print on the colors

[Unheard]

@M4D M4X

@Unheard

What was the max number of votes for the purple 18350 before Monday (USA?)

below 100…

and its Austria time btw

Actually the short tube option was added Feb, 3rd. So, yesterdays numbers should be considered .

[skinny_tie]

@Thro

@Thro

is see If the TK edition just got 103 “likes”. if it gets made, will it have the updated Lume1 driver and aux lights ?

Still wondering if this would be possible :question:

I assume it won’t be possible to get it with a Lume1 driver and aux LEDs as that would increase the cost, and as far as I know Neil doesn’t build-to-order like Simon. However if there is an option to get a Lume1 pre-installed I’ll definitely take it.

[oweban]

As long as it’s one of the lume1 drivers with MOSI/MISO around the right way, not like the first batch. Still a bit dirty about that.

[Notmyrealname]

@skinny_tie

@Thro

@Thro

is see If the TK edition just got 103 “likes”. if it gets made, will it have the updated Lume1 driver and aux lights ?

Still wondering if this would be possible :question:

I assume it won’t be possible to get it with a Lume1 driver and aux LEDs as that would increase the cost, and as far as I know Neil doesn’t build-to-order like Simon. However if there is an option to get a Lume1 pre-installed I’ll definitely take it.

I would too and would be willing to pay extra for the driver. I’m waiting to see if the lights even get made.

[M4D_M4X]

true

lets see which bodies are gonna happen and then we look what o put in them ;)

[ArtieT59]

Are you saying black has a chance??

[skinny_tie]

@oweban

As long as it’s one of the lume1 drivers with MOSI/MISO around the right way, not like the first batch. Still a bit dirty about that.

Good point, and hopefully the correct resistor values for the aux LEDs too although I’m planning something like loneoceans’ pink/cyan/warm white triLED combo for my purple shorty.

[oweban]

That too! I still haven’t done anything with my first-gen driver because of those two issues. Blah.

[Rat]

I will pay extra for the Lume1 driver and aux LEDs

[Thro]

@Rat

I will pay extra for the Lume1 driver and aux LEDs :+1:

Ditto if the flash pads are placed correctly

[BOO5TED]

@M4D M4X

Neal said there will be no print on the colors

Not all heroes wear capes.

[ArtieT59]

@M4D M4X

Neal said there will be no print on the colors

I just noticed that the man^ Said “colorS”. That is multiple, right? Like purple and…….?

Looks like I’ll be dropping some cheddah

[Sti.N.Gear.Usa]

I just saw this post and wondering if it’s still possible to get on the list?

If yes, I’m in for 2 Purple FW3A and 2 Purple 18350 tubes.

[Chatika_vas_Paus]

Sti.N.Gear.Usa

There is a fill-in form in the OP where you can choose the colors, quantity and optional short tube