I would like 30 big and 30 small Gen3 springs.
Thanks
I’ll take 25 small and 25 big Gen3 springs
I’ll take 26 large and 26 small Gen 3 springs, thanks.
All messages have been responded to appropriately.
BlueSwordM, any news about that fancy BeCu alloy?
No sadly. Nothing on that horizon.
It looks like the company went dark in that regard.
There are rumors that the company itself fudged testing numbers to make the new alloy much better than it seemed to be, while it may just be a tiny bit above BeCu 17500 while being quite a bit more expensive.
So yeah, that’s the last of what I’ve heard from it.
To be more precise, shouldn't it be said “there are rumors that the company itself fudged testing numbers to make the new alloy look much better than it actually was”?
Well, in any case I have to agree. Aided with my CC power supply long ago I made some quick voltage drop testing in a couple springs, and compared it versus the voltage drop in the newer Convoy linear drivers' springs: there was barely any difference.
This is no surprise to me. I do not meant to say that it is impossible to trust Chinese people, I know it is possible to find trustworthy people/manufacturers; but it has to be believed.
I could help in this regard if there's a need to sometime. O:)
I see. TBH the numbers looked too good anyway.
I’d like 30 large and 30 small gen3 springs 
All current messages have been responded to.
BlueSwordM !!
I am interested in some more springs !!
Im trying to understand what sizes and types are available.
If you still got them, I'd take 10 and 10 of the springs, and 12 of the SST-20 4000K's.
Btw, still really really like the 3500K's I got from you!
I will take 20 large and 20 small gen 3 springs Please, if you have any left. 
@Tom E, no problem. I still have 5x 3500K SST-20s if you want. As for the 4000k ones, I only have 20 left, so 12 is good.
As for the springs, that’s not an issue at all.
@CNCman, no problem too.
PMs will come soon.
Thanks, yes - would take those 5 3500K's as well.
Thank You very much !! 
Good to see people are still taking an interest in these
I haven’t needed any more for my lower amp setups after getting my hands on the Convoy high current spring. Installed both into a C8F and achieved the same lumens with a 40T, so it’s all I need. This BeCu spring is much better for really high current, but I was only using them in the C8F. Now I’ve got 160pcs sitting in my draw haha, not sure what I’ll use them for
IMPORTANT UPDATE
I have paused all spring orders for now, as nobody has seemed to receive any of their spring orders, even the early purchasers when I came back. Therefore, I won’t be accepting orders until I receive more information so I can prevent more springs orders from ending up in the void.
This is freaking unreal to the point I’ve actually opened an investigation with Canada Post, because even with COVID-19 shipping woes being a thing, at least someone from the US or Europe should have received their orders by now.
There’s something real fishy that’s going on. I should be receiving updates by Thusrday, and hopefully, I’ll at least get some shipping compensation because you’ve lost enough time not getting to use my springs.
PS: I’ll ship all of your orders again this Friday since I figured you people have already waited long enough. Hopefully I get more info and this is just a fluke and not someone literally stealing my orders for whatever reasons.
I’m sorry if I caused trouble for any of you, and I hope I’ll be able to make it up to the community who supported me for so long and the people have been so very patient with me.
I find most people don’t really mind waiting if the communication is on point, that’s my experience with my business. You’re a very genuine guy so I doubt anyone is going to be upset to the point it becomes a problem